F-18 new avionics isn’t functional for now

@Bayonet getting the idle-detent configured and calibrated correctly will be a bit harder

feel free to start a new thread here, if you need further assist with that

(I try to take these learnings and incorporate them into the default setup templates, for each device. We don’t have a template for Virpil CM3 yet…)

@Foxtrot701 said in TASMO or AGM84 fails?:

@DennyITA According to the DB, Kuznetsov has 1000 HP, and the AGM-84 deals 338 “water” damage. I’m not sure how much Kuznetsov absorbs this type of damage, but it definitely takes 3+ ASMs to destroy it.

Not to mention how many miss or are shot down…

@Knockoff
basically, your download is kaput. Messed up. Incomplete.
Download again.

@Elad-Yeshno
Same thing on a PC with a touchscreen. I don’t get the technical details but apparently “touch” works differently from mouse pointer and that’s where the issue is. I’m sure a dev will come along to explain better, but that’s your issue.

That’s why we use Helios.

Correct done all the basics.

Checked output
USB
so on and so forth

FIXED IT!

BAD USB HUB

Known bug in non-AFM aircraft indeed, but while trying out the C130 for a coop we flew a few weeks ago, I found a fix to take off.

Not sure why it works, but while rolling, if you push your stick forward, as if you were trying to push your nose into the ground, and then pull aft, it works.

I don’t think there is a certain minimum speed or a maximum time period for this push-pull to work, but I always gave it a quick tap forward about 10 - 20 kts before rotation speed, and was always able to get off the ground.

@mjones said in No FLIR image on HUD in 4.33 U5, 64 bit?:

I am having the same problem. No FLIR on HUD using the TUSBA with the WinWing ICP. ICP setup SIMAPP shows BRT wheel functioning correctly. Maybe a Launcher keymapping problem?

Yes, Launcher assigned ICP FLIR brightness to CONT wheel. BMS docs state BRT wheel is used for FLIR brightness on HUD.

@Icer said in Triple Monitors - are any changes going to be made in 4.38 re: displays?:

@Atlas - Intel i9-13900KF (no GPU) and a RTX 4090… not worth messing with…

Yeah, that “F” is the kicker. I used to avoid those as that extra monitor from the iGPU was useful.
How about a laptop dock that can do video via USB?

Hello and thank you for the great help with my problem.

After checking all entries, uninstalling the free head tracker, switching off the pilot, everything works normally again.

Thank you for the time you spent solving this problem of mine.

Best regards
Harry505

@PO-HSIUNG Without any other information, that error is usually corrupt system files or application files. Possibly Net framework files. SFC scan and reinstall BMS is what I would try first. If more than one person is getting it in multiplayer then it might be server computer causing it. Just a guess since all you have is error id. More details on what happens might help.

Thank you all for the support, all is now working as it should.

Thanks again,

vags

Setting that to FOV control did the trick. Thank you very much for the help.

@Mav-jp said in MIG-25 impossible to take off:

@airtex2019 said in MIG-25 impossible to take off:

@molnibalage this has been a physics bug for all non-AFM planes, known for over a year

https://forum.falcon-bms.com/post/368912

workaround is to fast-forward time in 2d, then enter the jet already airborn

And I have never been able to reproduce this bug.

As you can see on the post above the mig25 takes off fine

This one is really a PITA

RGR

@hiuuz said in MIG-25 impossible to take off:

@molnibalage I have made a simple TE and I was able to take off under 200Kts. Youtube quality is shit, but on the bottom of the screen you can see the speed. The flaps was down default.

Maybe it the specific airstrip is the issue. To me the plane behaves strangely, funny pitch rates during roll is experienced. I tried landing (I sit in the pit following takeoff) then takeoff again. It was not able take off.

(I discovered the takeoff issue when I checked the performance of the MiG-25 compared to reality. In average it was surprisingly accurate. In some areas the drag is underestimated in other cases over as I can judge. But when I performed the maximum performance interception by the book. The flight time to 400 km range the real life vs BMS flight time was almost the same. In 13 min 10 sec nominally by the book up to 21 km to 400 km horizontal distance. In BMS from 200 kts 200 ft to the point was 12:40 + but the time of the takeoff shall be added = almost identical.)

@Sirigonakis said in Keyboard Throttle doesnt work .:

(4.37.3) I used xbox controller for hotas and keyboard for throttle (+,-) but with the new update the throttle works only for controller . I tried reinstalling several times nothing work this ruins my game .Even when the controller is not connected.

https://forum.falcon-bms.com/post/388030

Please mark issue resolved.

@SOBO-87 - that’s pretty much a design standard. Where jets differ is HOW they manage their kinematics, and with respect to what dynamic reference - like with the Spin Mode switch in a Hornet (which has been removed from the latest Block of Super Hornets, and is Prohibited to select in those earlier ones that have them).

I’ve always had the impression that Viper FLCS laws are based more in “classical” aerodynamics (only because the airframe is so old), and more modern jets are based more on modern Control Optimization Theory.

@Obi1 Strange that nobody replies after so long. In the meantime I have seen the issue of ‘environment time shifting’ in every theater. I think there is a bug that time ‘shifts’ after ejecting from my aircraft. Seen this issue in .2 and .3 versions.
It is easier to reproduce if you create a TE, midair around sunrise or set. Some theaters really can shift from daylight to dark. Korea was more subtile.

Cheers Obi1

@kouzi said in CMDS MODES semi/auto:

@drtbkj

reinstall bms 4.37,problem solved

I’m glad you got it sorted out. I always hate to advise people to do the dreaded uninstall/reinstall , but was kinda wondering if something got corrupted .