<p>@danaos75 I figured out what was wrong. I have to cycle my INS from NAV to NORM and then back to NAV to get my Steer Points to show up on my HSD. The issue is related to the Winwing combat panel I use to control my INS rotary in 3D. When the sim starts mid-flight, whichever DX state the controls are in is what the simulator will show (e.g., if my gear lever is down, the gear will start to lower the moment the sim starts.)<br /><br />Anyways, hopefully, this helps anyone suffering from a similar issue. This shouldn’t be an issue when starting from the ramp.</p>

<p>I thought there was a way to change the size of the main window using coordinates somewhere.</p>

<p>@CriticalMass Good idea, will try this.<br /></p>

<blockquote>@airtex2019 now i know 1 answer:<br />i have to bring a AI wingman with me, then my avatar talk. this is NOT the case in 4.34<br /><br />the external sound, i dunno, it is different from 4.34, no matter what setting is. some one made a change on sound code.</blockquote><p>The answer is in my post. </p>

<p>ok now i figure it out:<br />i have to bring a AI wingman with me, then my avatar talk. this is NOT in 4.34<br /></p>

<p>@Voynut Hi,<br /><br />i don’t have a delay on my MFDE Hud.<br />It works perfect !</p>

<p>@Xeno OK, that is important. Thank you.</p>

<p>You don’t. You must use the Editor, and know what you are doing. By doing so, you’ll probably break multiplayer compatibility on that theater.</p>

<p>Hi,<br /><br />I have a question about the Libya theater. is the default cockpit for the F14 is an F18 cockpit? <br /><br /><br /><br />Thank you very much.</p>

<p><br /><br /><img class=“ql-image” src=“https://i.imgur.com/eCUXPbM.png” /><br /><br />Cheers, Uwe <br /></p>

<blockquote>@Alfred I have this as well. Anybody any idea what could cause it? It’s not super annoying so can live with.</blockquote><p><br />At this point I would wait for 4.36 and a nice fresh install…</p>

<p>@toon1ce Hi,Toon. Yes, that can be fixed. Go back into the Mafia Files and download the BMS Fighters Manual. In it you’ll find 2 options…<br />1) Section IA of the Manual gives the procedure to fix the hotspots.<br /> 2) Section VII gives you the option of putting a fully functional Hornet cockpit in your jet. We developed this option as some of the stock pits are austere.</p>

<blockquote>@cosics Yes, turning cold means nose away from bandit, turning hot means nose towarts the bandit. I think it has something to do with loosing lock / radar coverage.</blockquote><p>@Le_Beau Thank you for your answer.<br /><br /></p>

<p>Hi, I don’t know if this was posted already, search didn’t come up with anything. But I noticed a small bug with fox 3 calls from my own pilot voice. In several missions I’ve flown I noticed the fox 3 call gets stuck in a loop or something. When I launch my fox 3 against a bandit, I get the proper Falcon 1 fox 3 call. But then it gets in a loop that my pilot voice keeps repeating the fox 3 call a number of times even though I only shot 1 missile. One mission the voice kept making fox 3 calls for the rest of the duration of the flight. If this is already a known bug, please disregard my post.<br /><br /><br /><a href=“https://forum.falcon-bms.com/post/339124” target=“_blank”>https://forum.falcon-bms.com/post/339124</a> ?</p>

<p>I know you can get 2 SA8’s with one GBU-12</p>

<p>@airtex2019 Unfortunately this wasn’t made clear enough. I’m the author and first shared the source code on the UOAF discord (<a href=“https://discord.gg/U7UykYX” target=“_blank”>invite</a> and <a href=“https://discord.com/channels/582602200619024406/615631373968998435/908706086377357352” target=“_blank”>specific message</a> link), where I first noticed discussion around the issue. Later I compiled the same code into the .exe that was distributed to everyone. I also attached the source code in <a href=“https://forum.falcon-bms.com/post/334192” target=“_blank”>this reply</a> of mine in this very thread, though I admit I probably should have asked depapier to link it in his first post for best visibility.<br />In any case, as @airtex2019 correctly pointed out, my code just grabs the BMS path from the registry, finds the FALCON4_RCD.XML within every theater and only edits the 3 seeker entries mentioned by the hotfix notice. I didn’t make the script pause because it is usually bad practice when coding CLI applications, but if you open a CMD shell and run the .exe or .py from there you’ll see how it lists every file that it modified.<br />Python is one of the best languages available to quickly write short but powerful code like this, batch files are pretty limited when more complex logic is required. The python interpreter is also trivial to install and only going to become more useful in the future, even on non-coder PCs. For those who trust my word, there’s always the .exe.<br />Next time I’ll make sure to publish both exe and source code together in a more comprehensive way, along with an exe hash for good measure, cheers!</p>

<p>@Aragorn That’s funny. I’m the exact opposite of you. I use torrents exclusively for everything I don’t pay for. </p>

<p>@MaxWaldorf I get that with the routing and the AI “merging” but what about the speed? Again, it might be TGP view or my now more advanced age causing faulty memory since flying it from '98 off and on, but I feel like 3d ground units in KTO are the fastest I’ve ever seen them. </p>

<p>Good news, I was able to fix the problem using @danaos75 resolution. Deleting the file registry makes it so when you pause the open track application (with pressing stop not f9) you can use mouse look. I did try installing the other dll and it didn’t seem to work but it could be it wasn’t the same dll file in the other thread or it could be I just forgot something lol. For me deleting the file doesn’t matter as much as I only use open track for BMS and one other game so. Anyway thanks for the help guys appreciate the support.</p>

<p>@I-Hawk derp<br /><br />i need to not reply to stuff before I’ve had my coffee lol. Sorry. </p>