Non Falccon Startup Procedures
-
yes in your docs folder
Okā¦ā¦where in the docs folder?
Tirak, I see what you meanā¦I found nothing either. Good luck
-
No there isnāt anything but a cockpit diagram for the harrier in the Docs\Checklists & Cockpit Diagrams folders
The rampstarts still need to be done. any volonteer? Because it takes a guy who has interest and knowledge in these airplanes -
I understand that the F15E is not completely done and wasnāt able to find the MMC switch. I got the bird airborne, but without HSD and some.
-
I understand that the F15E is not completely done and wasnāt able to find the MMC switch. I got the bird airborne, but without HSD and some.
Is it possible to do it with keystrokes only? This might take some research.
-
@Red:
No there isnāt anything but a cockpit diagram for the harrier in the Docs\Checklists & Cockpit Diagrams folders
The rampstarts still need to be done. any volonteer? Because it takes a guy who has interest and knowledge in these airplanesI can do one for the Harrier. But itāll have to wait until Wednesday.
-
Is it possible to do it with keystrokes only? This might take some research.
Did not find a key bind for MMC from he keyboard layout
-
We are working on Harrier and Hornet-A.
Here you have the betas:
Zippo is working in the AV-8B Harrier II + https://goo.gl/LY0w8Y
And I am working in the F/A-18A http://1drv.ms/1NUszXX
-
Hi! this video was made by āRevientorā and helped me a lot. It is in spanish language but the procedures are understandable.
cheers
-
@Red:
No there isnāt anything but a cockpit diagram for the harrier in the Docs\Checklists & Cockpit Diagrams folders
The rampstarts still need to be done. any volonteer? Because it takes a guy who has interest and knowledge in these airplanesI saw the spanish language video linked above, and thought I could probably do one in english. I can probably get to work on it tomorrow with the help of that checklist located here (two posts above mine actually).
Iāll let you know if and when I am able to complete it tomorrow.
Edit- Video is done and will be live on youtube this evening at 4PM EST. I had to figure out where some things that were missing from the checklist went, but I believe I should have enough of a walkthrough that the average Joe can follow. I will post the link later today. It will be followed up by a second video of my āfirst lookā at the Harrier with commentary at 6PM EST. (basically the rest of the flight after the ramp start)
-
All F18 hornet fans can use this video:
With a video the ramp start is more simple.
-
That is awesome, thank you for this Massima!
-
Ok here is my shot at a full ramp start tutorial video for the AV-8B Harrier. I think I got it all, and whatever may be fuzzy I added subtitles. Thanks to Daisan for the checklist, that helped IMMENSELY!
-
All F18 hornet fans can use this video:
With a video the ramp start is more simple.
nice try but so much misinformation in that videoā¦
-
We are working on Harrier and Hornet-A.
Here you have the betas:
Zippo is working in the AV-8B Harrier II + https://goo.gl/LY0w8Y
And I am working in the F/A-18A http://1drv.ms/1NUszXX
nice work!
-
1. Donāt have to look around for canopy switch, itās clickable through any object.
2. Donāt power the LT/RT hardpoints (labeled generator) until later and if you have stuff stuck on the plane.
3. Pitot heat off until just before takeoff please. It gets hot!
4. FCR power wait until engine is running please.
5. Do not set INS to align until after DED is visible.
6. BU/UFC after UFC is powered.
7. Set flow feed NORM before cranking engine.
8. UFC power after engine is running full.
9. Prepare ext. lighting before engine start.
10. The farthest forward āthese 4 avionicsā switches is the master fuel cutoff switch.
11. EWS āturn this onā sequence clicked was: CMDS-RWR link, CMDS-JMR link, ECM JMR power, flare dispenser, chaff dispenser, RWR power, Handoff
12. Please turn on COM1/COM2 much earlier (at least before DTC load).
13. DL system power via DL up front button.
14. āDonāt know what that isā Drift C/O and I donāt know the second. -
When starting up the Harrier from ramp, I find that the FCR wonāt scan. Itāll start, bit-test and swap modes just fine, but the only way to get the scan going is in DF-mode with the FCR slaved to the HMCS, and the problem persists when cancelling DF. I see that BelGeode has the same problem as me in his videos (FCR azimuth scan symbol stuck to the left edge of the MFD). Am I (we) doing something wrong here, or is it a bug?
-
The day attack Harrier aināt got no radar.