Terain Follow Radar Bug Or Pilot Error?
-
. As for the speed the training manual dose indeed state 360kcas but I have tried it 400-550kcas and no effect.
You do understand that 360 knots and below will trigger the Low Speed Warning ?( Airspeed scale flashes, LIMITS on HUD and MFD)
-
Yeap, this is stated in the rl documentation, but the manufacturer has to state so just to be safe. As per my db in real the image comes at 7 minutes, this was counted in fall & early winder rl missions, so, until a new engine that takes temperature into account for various systems behavior I would recommend to drop the random -logic. Anyway in order to experience 15 minutes time-in the external temp must be -20C.
Similar logic, the max time-in for the real DB-110 pod is 120 minutes, I wouldn’t expect to see such values in a sim, if someday the Recce Pod would be implemented… Except in a new Alaska theater.
-
. Trying to operate TFR before it’s warmed up will throw every error in the book.
That is incorrect. Setting the TFR or FLIR to an operating mode while still in “NOT TIMED OUT”, will have no effect on any system. FLIR and TFR will simply not work until time out period is exhausted.
My bet is that Goldsmack operated a warmed up TFR while still in the chocks or taxing. This will trigger all sorts of cautions and warnings. (Speed warning, clearance warnings, TF FAIL if the radar altimeter is off etc.)Sorry Goldsmack… its pilot error.
-
Yeap, this is stated in the rl documentation, but the manufacturer has to state so just to be safe. As per my db in real the image comes at 7 minutes, this was counted in fall & early winder rl missions, so, until a new engine that takes temperature into account for various systems behavior I would recommend to drop the random -logic. Anyway in order to experience 15 minutes time-in the external temp must be -20C.
Similar logic, the max time-in for the real DB-110 pod is 120 minutes, I wouldn’t expect to see such values in a sim, if someday the Recce Pod would be implemented… Except in a new Alaska theater.
As I said. Maybe one day…
-
In my experience I have to press/release autopilot paddle once on stick, and all of those warnings stop complaining. From the manual there’s a very thorough aftercheck of the system before it becomes thrustworthy
Edit: oh, and don’t forget to check that radar altimeter is turned on
-
In my experience I have to press/release autopilot paddle once on stick, and all of those warnings stop complaining. From the manual there’s a very thorough aftercheck of the system before it becomes thrustworthy
Edit: oh, and don’t forget to check that radar altimeter is turned on
Not if you are on the ground with the TFR in a operational mode,which I believe it is case in this report. You will have to set the TFR to STBY, and then reset the SWIM monitors with the paddle switch or reset the FLCS .
-
Ah thank you for the quick response, The fist time to cold started for the TF mission and the second time I skipped ahead to TAXI (would that effect it?), I’m pretty sure I waited until the NOT TIMED OUT vanished from both the FLIER and TFR. As for the speed the training manual dose indeed state 360kcas but I have tried it 400-550kcas and no effect.
Did u see this, that’s why i assumed rdr standby, coz at least for me it’s never avtivated if joining inflight or taxi
-
In my experience I have to press/release autopilot paddle once on stick, and all of those warnings stop complaining. From the manual there’s a very thorough aftercheck of the system before it becomes thrustworthy
Edit: oh, and don’t forget to check that radar altimeter is turned on
Did u see this, that’s why i assumed rdr standby, coz at least for me it’s never avtivated if joining inflight or taxi
Correct. Activating TFR with Radar altimeter in STBY or OFF will cause problems. Maybe, he is operating the TFR with the Radar altimeter off.
-
Wow lots of responses and help :D. Thank you everybody I’m going to give it another go today and see if I can figure out where I am going wrong. I have been turning it on in the air as the training manual has stated. As for the Radar Alt…That could be it! I will test today, I don’t think the manual said to turn it on yet I got to there part where your supose to “test” the systems to make sure its working properly.
-
THAT WAS IT!! Radar Alt was not on!!…I was going to play Falcon 4 later but this problem was bugging me so I fired it up for a test and double checked everything including the rdr alt and it worked!!. Thanks everyone for the quick responses this was really bugging me