SweetFX/Reshade Question
-
Ok Arty, i’ll post what you want to see as soon as i can bud.
Just tested the FPS hit….there was none…my fps stayed between 80 and 100 over land, and over water as high as 170.
The FPS was the same with SweetFX on as it was when i turned it off.
I will record the Night mission with NVG today & try and post it tonight.
Now mind you,everyone’s system is different…someone running i7 6600 or the K version with a GTX 980 going to have better FPS, And if their running one of the new 10 series cards i can only imagine
Im running a i5 6600 with a GTX 970
-
Sure m8 ok no prob. no harry. take your time.
-
Oh one question, do you care whether its fullscreen NVG or the optical version?
-
not full the normal.
-
Ok….here it is Arty…sorry i couldn’t get it in the middle of the night but i remembered the 1st mission of Balkans is at dawn when the sun is right below the horizon. Hope that’s ok.
-
that’s even more awesome. Thanx.
About FPS have you witnessed any major impact or record it kinda like before after?
Of course this is based also and on your hw specs. -
Tass could you give me a run through on how to use reshade, I can’t seem to get that puppy to work with BMS, I’m sure it’s a case of rtfm but I can’t find any guides for using it( I have searched!). Thanks dood!
-
I tried to record that for you Arty, I record with Shadow play…and the FPS doesn’t show up in the recording
I have FRAPS, but that’s an FPS killer to begin with.
I feel no impact at all Arty, it runs smooth as silk
-
snarble… Are running 32 Bit or 64 Bit system? Go here http://reshade.me/sweetfx and grab this, scroll down to bottom of page Reshade 2.0.3 SweetFX 2.0. There’s an application inside after you extract it called Reshade SetUp. It’s basically the same as when you install BMS…you must show it where to go. It will ask you to Select Game. Show it to your FalconBMS folder DO NOT SEND IT TO LAUNCHER.exe in Root Folder!!! If your running a 32 Bit system…show it to C\FalconBMS\Bin\X86 folder and click on the 32 Bit exe, or if your running 64 Bit go to C\FalconBMS\Bin\x64 and click the 64 Bit Falcon BMS exe. After you click either of them depending on 32 Bit or 64 Bit…the program will automatically detect the exe and install SweetFX for you. You will see in the box the directx 9 option light up or if it stay’s blank, click on Directx 9 option… Then the box will say Run game or Launch Game i forget…After you launch game you should see alot of text in top Left corner of your screen…If you see that, your good to go!!! If its working, then go to what ever folder you installed too, X86 or x64, Sweetfx folder\Settings and start changing your colors or whatever you wanna do.
Added Link For My Settings http://www.4shared.com/rar/jaOqwFahce/SweetFX_settings.html
Hope adding this link is ok?
-
So let me get this straight.
This is actually SweetFX, probably a newer version with new options - shaders to alter. Your settings are settings for SweetFX.
Right?
:lol: looking at it its a bit fubared…
Reshade with framework and you run Mediator.
Another one is reshade with sweetfx and you run reshade setup…So it must be basically the same and you inject what you want and then apply the settings…
Also it must have the same prerequisite to first disable multisampling from Falcon gfx setup UI ?
Finally for guys with SoftTH must require the same trick with hex edit the injected d3d9.dll?
OR
have reshade d3d9.dll file in falcon bin directory. This replaces BMS original d3d9.dll so you might want to back it up first or rename it before you install - apply reshade.
renamed Soft TH dll from d3d9.dll to d3d9_sof.dll and place to same falcon bin directory.
went to reshade or sweetfx ini file (config file) and changed line originalD3D9.Dll=default to originalD3D9.Dll=d3d9_sof.dll
Didn’t try it yet but the guys at SoftTh say this is the way for other injectors… So the first that tries it please reply. I was doing the hex edit of the dll file trick. -
Well when you download it, it says reshade + sweetfx but yes the settings are for sweetfx. As far as .dlls & hex editors I have no idea, I’m not that computer literate
-
Thanks for getting back to me Tas, I will be a little busy until Friday-so I’ll try it then.
-
Yeah Arty, just read the inside of the SweetFX settings… file…It says its SweetFX 2.0, and the new injecter is called Reshade
-
NP Snarble….if i can help you in any way, just hit me up
-
snarble… Are running 32 Bit or 64 Bit system? Go here http://reshade.me/sweetfx and grab this, scroll down to bottom of page Reshade 2.0.3 SweetFX 2.0. There’s an application inside after you extract it called Reshade SetUp. It’s basically the same as when you install BMS…you must show it where to go. It will ask you to Select Game. Show it to your FalconBMS folder DO NOT SEND IT TO LAUNCHER.exe in Root Folder!!! If your running a 32 Bit system…show it to C\FalconBMS\Bin\X86 folder and click on the 32 Bit exe, or if your running 64 Bit go to C\FalconBMS\Bin\x64 and click the 64 Bit Falcon BMS exe. After you click either of them depending on 32 Bit or 64 Bit…the program will automatically detect the exe and install SweetFX for you. You will see in the box the directx 9 option light up or if it stay’s blank, click on Directx 9 option… Then the box will say Run game or Launch Game i forget…After you launch game you should see alot of text in top Left corner of your screen…If you see that, your good to go!!! If its working, then go to what ever folder you installed too, X86 or x64, Sweetfx folder\Settings and start changing your colors or whatever you wanna do.
Added Link For My Settings http://www.4shared.com/rar/ryGSuhqhba/SweetFX_settings.html
Hope adding this link is ok?
Link not working, is there another way to get it??
-
Hi guys… Just wanted to say that I’ve installed this today… Followed the instructions above. Used a setup provided by TASS <–- thank you very much man… Works amazing here… There is absolutely no frame drop for me when switching between fx on or off… Looks way better than original… The only thing i can say is that i tried it with multisampling disabled in falcon bms gfx setup, and tried it with it on… I like multisampling off… looks a bit nicer on my system. Thanks again…
-
Hitman77…. PM me an e-mail addy i will send it to you both Sweetfx and the Settings
-
DjDirtry….NP buddy…This added to Tomcats tiles is amazing
-
Also Arty…Just flew my first mission in a heavily contested combat zone with only minimal FPS drop…it went down to between 70 to 75, Still more then enough to fly in
Added some BLOOM to bleed the light, supposed to be one of the FPS hitters, didnt even feel it
-
Fps drop is subjective. What are your hw specs?
Sent from TapaTalk