Cougar FSSB/FCC/? mod
-
oups, used edit rather than reply, sorry mate (been corrected )
the problem wonāt be the desk, itās rather going to be the pain in the arm and shoulder
-
regarding sensitivity forces appliedā¦
This is where I call out the difference between kinetic (if not frenetic) and heart surgeon stick force inputters. Some guys are just very physical with their joysticks (ie not body parts), and others are not. It also goes back to why some pilots like positional sticks (like the stock warthog and cougar) and others want force FBW mods, not only the input forces but also the feedback of moving something and its translation to flight. In real life, this was a big problem for some pilots transitioning to the Viper when it introduced FBW FSS.
So your flying style might also be a factor in choosing not only force sensitivities, but also static or positional sticks. For the kinetic cowboys, the Warthog stays on the table much better than the Cougarās, as Reddog mentioned.
-
@Red:
oups, used edit rather than reply, sorry mate (been corrected )
the problem wonāt be the desk, itās rather going to be the pain in the arm and shoulder
Yah, its a factor too. Especially in BFM
-
I have a Cougars modded with FCC3 and FSSB-R1. They are almost identical except how the pressure sensitivity is adjusted. The FSSB R1 and R2 are just quality of parts (MTBF) which is life cycle, not sensitivity.
I see the R1 allows pressure to be modified by dip switches, does the FCC3 have anything similar or does it rely on you modifying curves in the cougar software? Iāll have to do a bit more reading on this but it sounds like Iād be happy with either the FCC3 or R1. Cheers everyone for the advice.
-
Do what I did. Spend months designing a desk āaddonā that is study enough to have a force sensing stick added to it. Iāve finished the build but havenāt bought the stick yet ha.
-
I see the R1 allows pressure to be modified by dip switches, does the FCC3 have anything similar or does it rely on you modifying curves in the cougar software? Iāll have to do a bit more reading on this but it sounds like Iād be happy with either the FCC3 or R1. Cheers everyone for the advice.
it will have when the āWarthog versionā will come out.
-
it will have when the āWarthog versionā will come out.
The current FFC3 has pots you can adjust.
-
The current FFC3 has pots you can adjust.
The trim pots are for centering. Not for sensitivity
-
I see the R1 allows pressure to be modified by dip switches, does the FCC3 have anything similar or does it rely on you modifying curves in the cougar software? Iāll have to do a bit more reading on this but it sounds like Iād be happy with either the FCC3 or R1. Cheers everyone for the advice.
Its raw input has no adjustment, however the input windows ends up seeing gets modified first, twice. First modification is due to the calibration file, which is where you set sensitivity for the stick if you are using FCC3. Second modification is you can use curves to modify the output, and you can configure these curves on the fly with Foxy.
Completely ignore the option for curves, leave it linear. BMS applies its own transforms to your inputs with the assumption that your input is linear.
-
The FSSB has sensitivity settings done via dip switches, but no tactile feedback adjustments (slight stick movement)
The FCC3 doesnt have hardware sensitivity adjustments as it can be done in software in curves and CCP calibration (i believe the strain gauges are preset to the real stick force pull specs), but it does come with either no mounting bushings, metal spring mount bushings or rubber o-ring bushings that provides different tactile feedback. The real FBW FSS has some stick play tactile feedback deflection, about 1/8 - 1/4 in iirc.
-
The FSSB has sensitivity settings done via dip switches, but no tactile feedback adjustments (slight stick movement)
The FCC3 doesnt have hardware sensitivity adjustments as it can be done in software in curves and CCP calibration (i believe the strain gauges are preset to the real stick force pull specs), but it does come with either no mounting bushings, metal spring mount bushings or rubber o-ring bushings that provides different tactile feedback. The real FBW FSS has some stick play tactile feedback deflection, about 1/8 - 1/4 in iirc.
the āWHā version of FCC will have adjustable absolute force settings (along with some other āEaster eggsā)
-
Will it be worth upgrading to, for existing owners? Or will it not be compatible with the Cougar?
-
the āWHā version of FCC will have adjustable absolute force settings (along with some other āEaster eggsā)
I wants one for my WHog. Can it be retro fitted to either the Cougar or Whog?
Is URI-BA = Arend?
-
I believe Uri-ba is helping Arend with the software. But when itās all ready, you can get it all hereā¦
http://www.vipercore.nl/index.php
ā¦Iām planning to.
-
Iām no Arend
The FCC itself is pretty much the same naturally.But the Warthog version of the FCC has an independent USB controller, so it does not really matter what you have (you just need the grip).
Arend has designed the board to be a drop in replacement for the WH board (PCB size, mounting holes ect.), but that doesnāt mean you canāt install it as an independent controller for a cougar based FCC. You will then need to find a solution for your throttle
-
Warthog USB Adaptorā¦ WUSBA?
-
Warthog USB Adaptorā¦ WUSBA?
thatās RealSimulator name
and itās not really a warthog adapterā¦ more like an FCC controller
-
The blog shows a circuit board with FCC - Warthog USB Adapter written on itā¦ so FWUSBA?
-
I intend to mount the board inside of Martinās FCC base, soā¦FCCBWUSBA?..:rolleyes:ā¦
-