HSI HDG & CRS knobs 5° option
-
Hi guys.
I made myself HDG & CRS knobs usign encoders with pushbutton. It allows me to rotate the encoders with 5° of increment/decrement instead of 1° ( when i simply rotate the encoder without pushing and holding down the built-in button).
I’ve noticed that in order to obtain 5° i need to rotate the enc. with a certain speed. If i don’t do so, the rotation gives me always 1°. Is it possible to change this? I would like to simply press and hold down the enc. and turn it at wathever speed i like and obtain 5° increments/decrementsThank you, especially to Focaldesign and Roccio for YAME!!!
A little demo showing how it works now
-
g_nKnobAccelerationDelta
See page 247 of the BMS-Manual for explanation of how it works.
-
I’ve noticed that in order to obtain 5° i need to rotate the enc. with a certain speed. If i don’t do so, the rotation gives me always 1°
yes, there is a setting in milliseconds in the config file to set the difference between 5 and 1°
I’m sure I referenced it in the BMS manual, config line annexEdit, snipped
-
@Red:
yes, there is a setting in milliseconds in the config file to set the difference between 5 and 1°
I’m sure I referenced it in the BMS manual, config line annexEdit, snipped
Thanks for your reply RD. As i explained, i use the built-in pushbutton in orfer to set 5° mode. What i want to do is to rotate without a rotation speed limit. Since i use different keymap for 1 and 5, simply i want to push and rotate and obtain 5°, regardless the speed i rotate. Is it possible?
-
g_nKnobAccelerationDelta
See page 247 of the BMS-Manual for explanation of how it works.
Ok found! Need to set “0”. I’ll try. Thank you Darkman!
Thanks all! -
g_nKnobAccelerationDelta
See page 247 of the BMS-Manual for explanation of how it works.
Looks like this option is no more available in 4.34.
Am i right?
Thankyou