A Guide to Morphine’s Profile for BMS 4.33 and Beyond
-
Thanks Gastone for the quick answer. I can confirm the following:
- I never load Team Speak before Target, that should not be the source of the issue
- Yesterday was a nightmare, I do not remember how many times I changed the USB ports and never was fixed
- Devicesorting.txt is correct, just checked again.
I think it may be that TARGET has some conflict with something else and it is not Team Speak. I’ll check it tomorrow and let see.
P.D. I do not think that your profile is the source of the Issue. Just to made sure, yesteday I tried to load other profiles and I got the same.
-
Thanks Gastone for the quick answer. I can confirm the following:
- I never load Team Speak before Target, that should not be the source of the issue
- Yesterday was a nightmare, I do not remember how many times I changed the USB ports and never was fixed
- Devicesorting.txt is correct, just checked again.
I think it may be that TARGET has some conflict with something else and it is not Team Speak. I’ll check it tomorrow and let see.
P.D. I do not think that your profile is the source of the Issue. Just to made sure, yesteday I tried to load other profiles and I got the same.
You could try uninstalling the windows store app. I’ve heard this also interferes with target. If that fails. You could try reinstalling the drivers and target. First unplugging all your thrustmaster controllers, then uninstall target and the drivers. Then reboot, and install target and the drives. Being sure to only plug in the joystick and throttle when prompted by the installer. If you plug in before windows will associate the device with the wrong driver and target won’t work.
-
Gastone,
I found two conflicts:
1.- \8DGaming Mouse.exe. I was able to uninstall this sw that I do not use, so is fixed.
2.- \WinStore.App.exe. I tried several ways to eliminate this exe. but with no success.Based on that if I Restart the computer and inmediatly I run TARGET then everything goes on the right direction. But if I wait let say 20-30 sec then Target start again with the same problems. It seems that if I run target immediately doesn’t give winStore.app.exe time to run before
Related to this file I tried several actions to find this file but with no success, even editing the Register.
If you have any idea how to delete the file, please share. Probably Microsoft in one of the updates put actions to make very dificult to find and eliminate winStore.app.exe
-
-
Dropping this Target profile helper here that I’ve been using for some time. This quickly kills the Windows Store so you can run the profile without the app blocking the virtual device.
Right click on your Desktop, select New, select Shortcut.
Copy and paste this into ‘Type the location of the item’: C:\Windows\System32\taskkill.exe /f /im WinStore.App.exe
Select next. Name it WinStore Killer or whatever you wish. Click finish. Run the shortcut right before you run Target. Profit. -
Thanks GhastlyTT,
That is exactly what I Design to solve the issue and work perfectly
-
Gastone,
I’m an old Falcon 4.0 driver from the old days of the 1.08 patch and TM FLCS HOTAS. Back when multiplayer with your squadron mates was a crap shoot. When I say old, I mean that literally! So, please forgive me for what I’m about to ask. Keep in mind that I have read BMS manuals the last few weeks until my eyes have developed a need for new glasses. I’ve read dozens of posts on here (many which seem somewhat to contradict one another) about the many questions which have popped into my feeble brain. So be gentle with the senior citizen here. I’m running a newly built system with MSI Z390, Intel i7 9700k, 32 Gb DDR4, GeForce GTX 1660, 1 Tb SSD, 1Tb HDD. That’s probably the main part of the hardware. I’m less than a year out from retirement from the teaching/coaching profession (that which pulled me away from flying RL and virtually in the first place), so I decided to get back to flying F4. I bought a new TM Warthog stick/throttle combined. I have installed everything per your instructions. No problems so far. My question(s): Using Morphine’s profile, do I select the “idle cutoff detent” in the configuration menu or not? I have set the idle detent and AB detent in Setup/Controllers in the UI. I’ve done a limited bit of flying just because I couldn’t stand it any longer. The AB seems to work fine. However, I have not done a cold start yet or tried cutting the engine off by lifting the throttle over the idle stop. Newton said, “if I have seen further than others, it is by standing upon the shoulders of giants.” Well, I don’t want to see further, but I do want to learn from the hard work of others. That may seem lazy (and maybe it is), but I do believe in learning from those who know more than me. Time is a precious commodity, and I want to make the most of the flying time I have.
Thanks in advance,
Bronc -
Bronc,
Welcome back to the party. Feel free to ask all the questions you like we’re all here to help. Feel free to PM me too. You do have to the idle cutoff box checked in the setup for the warthog throttle idle detents to work. Just a tip on the cold start too, make sure to wake the throttle axis up before starting the JFS. When you start the sim the throttle won’t be synced with the joystick. So move the joystick in and out of idle then back into idle before you start the jet. -
Thanks for the help. I will give it a go.
-
Dear all,
I have enjoyed this warthog profile (Morphine’s Profile for BMS 4.33 and Beyond by Gastone) since years. Congrats again for the great work. I have been now using VoiceAttack and the great AVCS4 profile but I am struggling with using the push-to-talk linked to VHF/UHF. When pressing these, there is no reactions from VoiceAttack.
Does anyone use this profile with AVCS4 and does it work with the UHF/VHF function ?
-
Hello,
Has anybody tried to use the Morphine (Gastone) profile (.key file) with Alternative Launcher mod ?
Apparently it will solve all the problems related to the Warthog HOTAS… just need to rename the Morphine key file “BMS Full.key” (check the correct name) and load it.
Anybody tried ?
Will do myself tomorrow and report back. -
Curious, what exactly are the problems that it would solve? I’ve been using this target profile and key file without issue.
-
Swiso could never get target to run correctly. He kept getting combine root. Maybe he should try your fix and kill the windows store.
-
Swiso could never get target to run correctly. He kept getting combine root. Maybe he should try your fix and kill the windows store.
Hi Gastone, yes my problems are the ones you mentioned.
I am not sure the solution you mention is relevant to my case since I have Windows 7… and from what I know, Windows store exe file appeared only with Windows 8 and later….
I will try the Alternative Launcher app and report back.
Thanks -
Hi Gastone, yes my problems are the ones you mentioned.
I am not sure the solution you mention is relevant to my case since I have Windows 7… and from what I know, Windows store exe file appeared only with Windows 8 and later….
I will try the Alternative Launcher app and report back.
ThanksHave you tried using the event viewer to see what’s conflicting with target?
https://helpx.adobe.com/x-productkb/global/identify-software-conflicts-system-log.htmlOr making sure power saving for USB is off and disabled for the hotas?
https://support.microsoft.com/en-us/help/930312/the-allow-the-computer-to-turn-off-this-device-to-save-power-power-man -
Have you tried using the event viewer to see what’s conflicting with target?
https://helpx.adobe.com/x-productkb/global/identify-software-conflicts-system-log.htmlOr making sure power saving for USB is off and disabled for the hotas?
https://support.microsoft.com/en-us/help/930312/the-allow-the-computer-to-turn-off-this-device-to-save-power-power-manOh man…I don’t know why, but after trying one more time, it look like finally it work !
Don’t know the reason why… -
Do I still need the 5.34.tmc Dropbox version is running the latest Target version which is:
3.0.20.427
Thanks!
-
Do I still need the 5.34.tmc Dropbox version is running the latest Target version which is:
3.0.20.427
Thanks!
It’s a new version of target for the airbus stuff. Both versions of the profile should still work. All they did was add support for the new TCA to target. If the profile works for you as is, no need to update target. If it is working for you I would actually recommend not upgrading target, since it can be so unpredictable.
The only reason there are two profile is Version 5.XX excludes the TPR pedals from the script. The only reason I’ve kept Version 4.xx in the dropbox is because if you run a old version of target, with Profile 5, target throws an error and the script doesn’t work. I will be dropping support for version 4 the next time the profile is updated.
-
Thanks!
-
Am I missing the FLAPS switch in your profile for the HOTAS?
What do you all use for setting flaps?
Also, many of the functions are working fine in the profile but the SpeedBrakes have no function set in the controls?