F4 BMS 4.35 and Display extraction with RTTConfig
-
Thank you Sir, that will help many ppl saving them some time!
-
Thank you very much for this Tool. It spares my a lot try and error during the configuration :D.
-
Thank you all for your messages. I’m glad this software makes it easy for you to configure and use RTT. That was the goal : " splash one"
-
Thanks mate! Can the gauges / MFDs be resized on the fly as well? A very useful tool indeed!
All the best,
Uwe
-
Thanks mate! Can the gauges / MFDs be resized on the fly as well? A very useful tool indeed!
All the best,
Uwe
Sorry Hoover but It’s not possible.The software is designed to position and resize displays before launching RTT.
-
Oh, that’s ok, that’s the way YAME handles it as well. I’ll try your tool for the MFDs and report back. Thanks again!
All the best, Uwe
-
Yep, works very nicely as intended. It would be great if the resize wouldn’t work around the center, but from the side / edge you’re trying to resize but that’s no biggie. Thanks for creating this tool!
All the best,
Uwe
-
Thanks for this tool AlphaFox. Will make it a lot easier I hope.
-
Thank you for this tool.
-
Great tool, thanks.
Is it possible to add the HSI to the list of exports? My old eyes need the seniors version on the second screen…
-
Great tool, thanks.
Is it possible to add the HSI to the list of exports? My old eyes need the seniors version on the second screen…
Sorry, it 's not possible actually because HSI is’nt in the list of displays. RTT displays “only” HUD, DED, PFL, MDF L, MDF R, RWR and HMS.
-
Sorry, it 's not possible actually because HSI is’nt in the list of displays. RTT displays “only” HUD, DED, PFL, MDF L, MDF R, RWR and HMS.
MFDE includes all cockpit instruments working with 4.35. For MFD’s it may suffer the same random freezes as RTT does due to the same shared memory reading
-
just curious how do you shut off rtt client in bms? seems I have to control alt delete every time to shut it down to reprogram it.
Also Oak Design 4.35 does not work with Lightenings mfd extractor for MFDS. if you got yours working please let me know because I have not been able to get them to work. -
just curious how do you shut off rtt client in bms? seems I have to control alt delete every time to shut it down to reprogram it.
Also Oak Design 4.35 does not work with Lightenings mfd extractor for MFDS. if you got yours working please let me know because I have not been able to get them to work.I build mine from the source code and the version I’m using works for 4.35 and 4.34.
If you are using the current release version of 0.6.3.0 than you have to add
set g_bDoubleRTTResolution 1
to your falcon bms.cfg
or you can try
my build
https://drive.google.com/file/d/177VhX_kTKOSL9vjobD7fzHGk2GupigrP/view?usp=sharing
it is build as a portable version so doesn’t come with an installer. Just unzip to any folder you want and start the MFDEExtractor.exe. Can be used tested even witout uninstalling the MFDE version you have currently installed.To easily identity the versions is if on the MFD / HUD option page you still have the option for MFD #3 and #4 you are using a version that needs the g_bDoubleRTTResolution to be part of the config.
If the config page only shows Left/right and HUD it’s buil from the latest source code and works with 4.35 out of the box
Left is old source code, right is new source code -
Your discussion would be more readable and more beneficial to the community in a dedicated thread e.g: “MFDE and F4 BMS 4.35”
RTTConfig only concerns RTT remote.
My two cents.
-
There is a way to get the «MFD images» overlay (from RTT or MFDE) when using a Print Screen?
Pretty screen shot option On or Off doesn’t help. The MFD image overlay never appear in my output picture…I need to get the MFD images output within the “Print screen” for technical documentation requirements and the “MFD Extraction” inside the main Falcon BMS 3D screen should give me a very clean PNG image output of the MFD. If I remember, this was possible in the past, but I am unable to do this in BMS 4.35 U1.
Thanks for your help.
-
I’m pretty sure I didn’t work before as well. Why should it ever Printscreen is using BMS internal screenshot. BMS itself doesn’t even know that a display Extraction tool is running at all. So in order to get a screenshot with overlays you might wanna use the Operating system Printscreen instead
-
Was having issues with MFDE 0.6.3.0 not displaying MFDs in other theaters, worked fine for KTO only. I had never used the RTT client before, found this tool last night and had RTT up an running fine in less than 10 minutes! So now I use RTT to extract the MFDs and use MFDE for everything else.
Thanks for this great RTT setup tool.
-
This is extracting as it should but I am unable to reposition or resize using the mouse. Any thoughts as to why? Thanks for the work. great idea.
-
@Kerfuffle you can’t do it with mouse as far as i know.
I did the positioning with my 4.33 via MFD extractor write down the x and y Coordination also the size of the both MFD und gave it to the tool RTT manual. -
-
-