Opentrack
-
hi guys can i jump into this as a noob to delanclip and opentrack, all set up today and working in BMs, wow!
but i was wondering about this?…
opentrack pic by arabianjules, on Flickr
does the X through the middle led mean anything?
in game, i need to take out pilot model, he gets in the way, im not able to see down to my L or R to the rear of the consoles?
thanks for any feedback
John.
-
Check the dimension settings the X represents where Opentrack calculates head rotation point. It should be offset to the IR detection
Gesendet von meinem SM-G930F mit Tapatalk
My BMS.ini for opentrack maybe just to get you an idea of curves
with correctly configured opentrack no issue to see all panels with pilot model turned on
-
Check the dimension settings the X represents where Opentrack calculates head rotation point. It should be offset to the IR detection
Gesendet von meinem SM-G930F mit Tapatalk
My BMS.ini for opentrack maybe just to get you an idea of curves
with correctly configured opentrack no issue to see all panels with pilot model turned on
cheers, this what i have in point tracker
pointTracker by arabianjules, on Flickr
the BMS.ini file you shared with me, what/where do i save that to?
John.
-
1. You haven’t done the calibration. All values are still 0 0 0
2. You can unzip my BMS.zip and put the included .ini file in your windows/user/documents/Opentrack Folder.Gesendet von meinem SM-G930F mit Tapatalk
-
1. You haven’t done the calibration. All values are still 0 0 0
2. You can unzip my BMS.zip and put the included .ini file in your windows/user/documents/Opentrack Folder.Gesendet von meinem SM-G930F mit Tapatalk
https://uploads.tapatalk-cdn.com/20200521/559e5f70cad8d606a35a594dc23ef412.jpg
did calibration, actually figured it out after i saw yours, now when i jump in to cockpit im a little to one side and having to adjust all the time, may try your .ini file thanks.
John.
-
ok so i used your file oakdesign, and it was ok for a while, and i dont know i must have done something to cock it up, soi went back and set it all up again, in the intial set up video that delanclip give you, its a guy from DCS, which is a good video, again problems, i have move my camera across the to side of the clip, and tilted clip up slightly, as it seemed the top led was masking the middle one slightly.
But now in 3D pit its not smooth and its all over the place like the movement change is set to short?
oh dear…any help/pointers greatly recieved.
John.
-
I have gone through setting up a Delanclip system recently. One thing you could make sure is that the LEDs are being read properly, like you say with enough spacing between them. For that you could try CL-Eye Test, that is one of the programs that Delanclip recommends as first stage in setting up. I used it to make sure that the LEDs were distinctly different, like just three white dots on a black background, in the middle of the screen and vertically aligned. That program will show you if you need to move your camera a bit and perhaps set filters. Or even if you have to bend the clip slightly, which Delanclip almost always needs.
This is what the camera “sees” on my setup, almost vertical and three distinct dots:
-
Thank you for your profile. It really saved me some time and allowed me to enjoy flying instead of trial and error set up
-
@obsidianuk Obsidian your profile worked like a charm…I completed two missions with no issues! Outstanding!!
-
-
Here , neverimnd the name of the profile lol
But those are last axis setting I use…
You might/ probably will need to correct/preset as your preference , as there are no two setups that are the same,
Need to copy this file to /ini subdir of opentrack … per win settings, probably same on Nux.
Cheers, enjoy
-
this is my
goto
when it comes to opentrack lots of info, and i have had to reset and start again on a few occasionshttps://forum.il2sturmovik.com/topic/34403-a-complete-guide-to-set-up-head-tracking-opentrack/
John. -
Thanks folks!
All the best,
Uwe
-
Thanks obsidianuk just got a Delanclip fusion pro, your profile was a great help