Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..
-
EDIT: I saw there was a Nvidia Hotfix (516.79) and applied it, same result. Went in and disabled any sound devices besides the SoundBlasterX G6, same result. Rebooted and now it works fine…
Good to hear it works again. No need for further info, enjoy u1!
-
@Tumbler31 said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
EDIT: I saw there was a Nvidia Hotfix (516.79) and applied it, same result. Went in and disabled any sound devices besides the SoundBlasterX G6, same result. Rebooted and now it works fine…
Good to hear it works again. No need for further info, enjoy u1!
Thanks, but I sure would like to know what caused it…
-
@Icer said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Tumbler31 said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
EDIT: I saw there was a Nvidia Hotfix (516.79) and applied it, same result. Went in and disabled any sound devices besides the SoundBlasterX G6, same result. Rebooted and now it works fine…
Good to hear it works again. No need for further info, enjoy u1!
Thanks, but I sure would like to know what caused it…
Apparently bugged Nvidia drivers
-
@Tumbler31 said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Icer said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Tumbler31 said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
EDIT: I saw there was a Nvidia Hotfix (516.79) and applied it, same result. Went in and disabled any sound devices besides the SoundBlasterX G6, same result. Rebooted and now it works fine…
Good to hear it works again. No need for further info, enjoy u1!
Thanks, but I sure would like to know what caused it…
Apparently bugged Nvidia drivers
Don’t think that’s it because I just checked and the Error is back… not solved.
-
I Icer has marked this topic as unsolved on
-
@Icer USB sound adapter? I have a Sennheiser usb headset … amazing audio quality, but very dodgy drivers. Sometimes I have to unplug and replug it, and it’s 50/50 whether it initializes or not.
Maybe it’s just something about USB audio in Windows…
When my usb audio driver fails to init, the audio path falls back to the Nvidia drivers (audio over displayport).
But if your monitor has no speakers… maybe that is causing BMS to throw that error?
Just wild guessing.
-
@Icer it worked and now it doesn’t anymore? That’s curious, did you change something in between?
And please share the full dump and post post the text file logs files here, I might have a look on my phone
-
@airtex2019 said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Icer USB sound adapter? I have a Sennheiser usb headset … amazing audio quality, but very dodgy drivers. Sometimes I have to unplug and replug it, and it’s 50/50 whether it initializes or not.
Maybe it’s just something about USB audio in Windows…
When my usb audio driver fails to init, the audio path falls back to the Nvidia drivers (audio over displayport).
But if your monitor has no speakers… maybe that is causing BMS to throw that error?
Just wild guessing.
@airtex2019 - Coincidentally I use a Sennheiser headset also but it is not USB, though my Sound “card” (Sound BlasterX G6) is… I have no other Sound Devices active. Before this I used on-board (Realtek) and a Logitech USB headset, but have been using the G6 uneventfully for many months…
-
@Tumbler31 said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Icer it worked and now it doesn’t anymore? That’s curious, did you change something in between?
And please share the full dump and post post the text file logs files here, I might have a look on my phone
@Tumbler31 - Crash.txt contents below, the crash.dmp file (crash.zip) is here (752kb) - https://www.dropbox.com/s/powqldmy6utkmfb/2022-07-24_130011_crash.zip?dl=0
======================= CRASHLOG =============================== Falcon BMS.exe caused an EXCEPTION_BREAKPOINT in: 00000000F70CFA7C KERNELBASE.dll, RaiseException()+108 byte(s) Exception handler called in CRT Terminate Handler. BreakpointBytes at CS:RIP: 0F 1F 44 00 00 48 8B 8C 24 C0 00 00 00 48 33 CC Registers: RAX=0x0000000000d325a0 RBX=0x0000000004534fe0 RCX=0x0000000000000082 RDX=0x000000000014f528 RSI=0x0000000004e08480 RDI=0x00000000024d25b0 RBP=0x0000000000000000 RSP=0x000000000014fca0 RIP=0x00007ffff70cfa7c FLG=0x0000000000000202 R8=0x0000000000000001 R9=0x0000000000d325a0 R10=0x0000000000d325a0 R11=0x0000000000000001 R12=0x00000000024d25b0 R13=0x0000000000000040 R14=0x00000000024d3cc0 R15=0x000000000014fea0 CS=0x0033 DS=0x002B SS=0x002B ES=0x002B FS=0x0053 GS=0x002B Call Stack: 0033:00000000F70CFA7C KERNELBASE.dll, RaiseException()+108 byte(s), Parameters(0x0000000004E1FC80 0x0000000000000000 0x0000000000000006 0x000000000014FD58) 0033:0000000004535003 Falcon BMS.exe, bms_terminate_handler()+35 byte(s), E:\WIP\BMS\Repo\Code-Dev\FALCLIB\ehandler.cpp, line 1448, Parameters(0x00000000024D3CA8 0x0000000004E033A0 0x00000000024D25B0 0x00000000024D3CC0) 0033:0000000004C94777 Falcon BMS.exe, terminate()+31 byte(s), d:\th\minkernel\crts\ucrt\src\appcrt\misc\terminate.cpp, line 49, Parameters(0x00000000024D3CB0 0x0000000000000000 0x0000000004E0A270 0x00000000024D25B0) 0033:0000000004E084A2 Falcon BMS.exe, `TextToSpeech::Voice'::`2'::`dynamic atexit destructor for 'theInstance''()+34 byte(s), Parameters(0x0000000000000000 0x000000000054504B 0x0000000000000000 0x0000000000000000) 0033:0000000004CA556F Falcon BMS.exe, __crt_seh_guarded_call<int>::operator()<<lambda_e24bbb7b643b32fcea6fa61b31d4c984>,<lambda_275893d493268fdec8709772e3fcec0e> & __ptr64,<lambda_9d71df4d7cf3f480f8d633942495c3b0> >()+283 byte(s), d:\th\minkernel\crts\ucrt\devdiv\vcruntime\inc\internal_shared.h, line 199+2 byte(s), Parameters(0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000014FED0) 0033:0000000004CA5815 Falcon BMS.exe, _execute_onexit_table()+53 byte(s), d:\th\minkernel\crts\ucrt\src\appcrt\startup\onexit.cpp, line 222, Parameters(0x000000000E2D04E8 0x0000000000000000 0x0000000000000002 0x0000000000000002) 0033:0000000004C8EF10 Falcon BMS.exe, common_exit()+244 byte(s), d:\th\minkernel\crts\ucrt\src\appcrt\startup\exit.cpp, line 215+12 byte(s), Parameters(0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000) 0033:0000000004C78B58 Falcon BMS.exe, __scrt_common_main_seh()+360 byte(s), D:\a\_work\1\s\src\vctools\crt\vcstartup\src\startup\exe_common.inl, line 295+7 byte(s), Parameters(0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000) 0033:00000000F931244D KERNEL32.DLL, BaseThreadInitThunk()+29 byte(s), Parameters(0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000) 0033:00000000F974DF78 ntdll.dll, RtlUserThreadStart()+40 byte(s), Parameters(0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000) Top of Stack: 0x000000000014FCA0: 0000000018EC859F 0000000004534FE0 0000000004E08480 000000000000037F .........OS..................... 0x000000000014FCC0: 0000008080000003 0000000000000000 00007FFFF70CFA7C 0000000000000000 ................|............... 0x000000000014FCE0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ................................ 0x000000000014FD00: 000000000014FEA0 000000000E2906C0 000000000014FEA0 00007FFFF70697CB ..........)..................... 0x000000000014FD20: 000000000014FEA0 00007FFFF97439B0 0000000000000040 00000000024D25B0 .........9t.....@........%M..... 0x000000000014FD40: 0000000000000007 0000000004CA9E44 0000000000000007 0000000000554580 ........D................EU..... 0x000000000014FD60: 00004A28B89A0055 0000000004CA7ABC 00000000024D25B0 0000000004535003 U...(J...z.......%M......PS..... 0x000000000014FD80: 0000000004E1FC80 0000000000000000 0000000000000006 000000000014FD58 ........................X....... 0x000000000014FDA0: 00000000024D25B0 0000000004C94777 00000000024D3CA8 0000000004E033A0 .%M.....wG.......<M......3...... 0x000000000014FDC0: 00000000024D25B0 00000000024D3CC0 00000000024D3CA8 0000000004E084A2 .%M......<M......<M............. 0x000000000014FDE0: 00000000024D3CB0 0000000000000000 0000000004E0A270 00000000024D25B0 .<M.............p........%M..... 0x000000000014FE00: 00000000024E0010 0000000004CA556F 0000000000000000 000000000054504B ..N.....oU..............KPT..... 0x000000000014FE20: 0000000000000000 0000000000000000 00000000024D3CA8 00000000024D25B0 .................<M......%M..... 0x000000000014FE40: 00000000024D25B0 00000000024D3CC0 0000000000000001 0000000000000000 .%M......<M..................... 0x000000000014FE60: 0000000000000000 0000000000000000 00004032AD08D49C 0000000004CA5815 [email protected]...... 0x000000000014FE80: 0000000000000000 0000000000000000 0000000000000000 000000000014FED0 ................................ 0x000000000014FEA0: 000000000014FEC0 0000000100000000 0000000000000000 0000000004C8EF10 ................................ 0x000000000014FEC0: 000000000E2D04E8 0000000000000000 0000000000000002 0000000000000002 ..-............................. 0x000000000014FEE0: 0000000000000000 0000000004C78B58 0000000000000000 0000000000000000 ........X....................... 0x000000000014FF00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ................................ 0x000000000014FF20: 0000000000000000 00007FFFF931244D 0000000000000000 0000000000000000 ........M$1..................... 0x000000000014FF40: 0000000000000000 0000000000000000 0000000000000000 00007FFFF974DF78 ........................x.t..... 0x000000000014FF60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ................................ 0x000000000014FF80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ................................ 0x000000000014FFA0: 000004F0FFFFFB30 000004D0FFFFFB30 0000000000000021 0000000000000000 0.......0.......!............... 0x000000000014FFC0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ................................ 0x000000000014FFE0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ................................ ================================================================================ TLS frame allocator: 0 allocations with 0 bytes [0] 0 allocations with 0 bytes [1] Renderer command count: 0 Object at RCX(0000000000000082) Data inaccessible ================================================================================ Compiler Options: _MSC_VER=1929 WINVER=0x601 _WIN32_WINNT=0x601 _WIN32_WINDOWS=0x601 NTDDI_VERSION=0x6010000 _WIN32_IE=0x800 ANSI _M_AMD64 _AMD64_ _WIN64 Release* System Information: 'C:\Falcon BMS 4.36\Bin\x64\Falcon BMS.exe', run by grado_a8okloo. Error occurred at 13:00:26 on 2022-07-24. Version: Falcon BMS 4.36.1 (x64) 26443 Not in game Theater terrain path: 'C:\Falcon BMS 4.36\Data\Terrdata\korea' Operating System: Windows 10 (10.0.22621) Platform 2 . Computer Name: GARYMONSTER Domain: PERIS. 16 logical processor(s), type 8664. CPU: Intel(R) Core(TM) i9-9900K CPU @ 3.60GHz. GenuineIntel. Stepping: D Model: E Family: 6. 8% memory in use: 65472 MB physical memory 59632 MB physical memory free 75200 MB paging file 68123 MB paging file free 134217728 MB user address space 134212353 MB user address space free Module List: C:\Program Files (x86)\NaturalPoint\TrackIR5\NPClient64.dll, loaded at 0x0000000004410000 - 19656 bytes - TimeDateStamp 0x 52e97eca - File date is 15:08:42 on 2016-04-06 C:\Falcon BMS 4.36\Bin\x64\Falcon BMS.exe, loaded at 0x0000000004470000 - 15896064 bytes - TimeDateStamp 0x 62c07b43 - File date is 19:07:22 on 2022-07-02 Environment Variables: 2: <ALLUSERSPROFILE=C:\ProgramData> 3: <APPDATA=C:\Users\grado_a8okloo\AppData\Roaming> 4: <CommonProgramFiles=C:\Program Files\Common Files> 5: <CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files> 6: <CommonProgramW6432=C:\Program Files\Common Files> 7: <COMPUTERNAME=GARYMONSTER> 8: <ComSpec=C:\WINDOWS\system32\cmd.exe> 9: <DriverData=C:\Windows\System32\Drivers\DriverData> 10: <GOOGLE_API_KEY=no> 11: <GOOGLE_DEFAULT_CLIENT_ID=no> 12: <GOOGLE_DEFAULT_CLIENT_SECRET=no> 13: <HOMEDRIVE=C:> 14: <HOMEPATH=\Users\grado_a8okloo> 15: <LOCALAPPDATA=C:\Users\grado_a8okloo\AppData\Local> 16: <LOGONSERVER=\\GARYMONSTER> 17: <NUMBER_OF_PROCESSORS=16> 18: <OneDrive=C:\Users\grado_a8okloo\OneDrive> 19: <OneDriveConsumer=C:\Users\grado_a8okloo\OneDrive> 20: <OS=Windows_NT> 21: <Path=c:\program files (x86)\common files\oracle\java\javapath;c:\windows\system32;c:\windows;c:\windows\system32\wbem;c:\windows\system32\windowspowershell\v1.0\;c:\windows\system32\openssh\;c:\program files\nvidia corporation\nvidia nvdlisr;c:\program files (x86)\intel\intel(r) management engine components\dal;c:\program files\intel\intel(r) management engine components\dal;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Users\grado_a8okloo\AppData\Local\Programs\Python\Python39\Scripts\;C:\Users\grado_a8okloo\AppData\Local\Programs\Python\Python39\;C:\Users\grado_a8okloo\AppData\Local\Microsoft\WindowsApps;%USERPROFILE%\AppData\Local\Microsoft\WindowsApps;> 22: <PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC> 23: <PROCESSOR_ARCHITECTURE=AMD64> 24: <PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 158 Stepping 13, GenuineIntel> 25: <PROCESSOR_LEVEL=6> 26: <PROCESSOR_REVISION=9e0d> 27: <ProgramData=C:\ProgramData> 28: <ProgramFiles=C:\Program Files> 29: <ProgramFiles(x86)=C:\Program Files (x86)> 30: <ProgramW6432=C:\Program Files> 31: <PSModulePath=C:\Program Files\WindowsPowerShell\Modules;C:\WINDOWS\system32\WindowsPowerShell\v1.0\Modules;C:\Program Files\Intel\Wired Networking\> 32: <PUBLIC=C:\Users\Public> 33: <SESSIONNAME=Console> 34: <SystemDrive=C:> 35: <SystemRoot=C:\WINDOWS> 36: <TACVIEW_DCS2ACMI_PATH=C:\PROGRA~2\Tacview\DCS\> 37: <TEMP=C:\Users\GRADO_~1\AppData\Local\Temp> 38: <TMP=C:\Users\GRADO_~1\AppData\Local\Temp> 39: <USERDOMAIN=GARYMONSTER> 40: <USERDOMAIN_ROAMINGPROFILE=GARYMONSTER> 41: <USERNAME=grado_a8okloo> 42: <USERPROFILE=C:\Users\grado_a8okloo> 43: <windir=C:\WINDOWS> 44: <__COMPAT_LAYER=ElevateCreateProcess> ================================================================================
-
@Icer hmmm that one. Can you also post the .xlog? You have to run with
-mono
-
@Tumbler31 said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Icer hmmm that one. Can you also post the .xlog? You have to run with
-mono
Ran it with the -mono parameter, Debug window popped up, contents below:
[00:00:00.000] 13100 **** Falcon 4.0 **** [00:00:00.000] 13100 **** (C) 2022 Tommo Inc. All Rights Reserved. **** [00:00:00.000] 13100 **** Falcon BMS 4.36.1 (x64) Build 26443 **** [00:00:00.000] 13100 **** (C) 2022 Benchmark Sims. All Rights Reserved. **** [00:00:00.000] 13100 Operating System: Windows 10 (10.0.22621) [00:00:00.000] 13100 Valid F4 installation found [D:\SteamLibrary\steamapps\common\Falcon 4.0\falcon4.exe] [00:00:00.000] 13100 Create window at 2590, 24 with size 1024x768 (client) 1040x807 (window) [00:00:00.000] 13100 WM_SIZE 0x0 to 1024x768 [00:00:00.000] 13100 SIZE_RESTORED other (SetWindowPos, mSwapChain->SetFullscreenState...) [00:00:00.000] 13100 SIZE_RESTORED handle resize 0x0 to 1024x768 [00:00:00.000] 13100 WM_MOVE 0|0 to 2590|24 (client pos to 2598|55) delta -8|-31 for style -1865809920 [00:00:00.000] 13100 FalconMainWindowD3D11::handleOnActivate 0->1 [00:00:00.000] 13100 WM_ACTIVATEAPP 1, previous active window thread 16368 [00:00:00.000] 13100 WM_ACTIVATE 1 (minimized state 0), window handle being deactivated 0 [00:00:00.000] 13100 SetWindowLongPtr GWL_STYLE -1879048192 [00:00:00.000] 13100 SetWindowLongPtr GWL_EXSTYLE 0 [00:00:00.000] 13100 AppWindow::setBorderState: style changed position 2590|24 to 2590|24 [00:00:00.000] 13100 AppWindow::setBorderState: style changed size to w: 1024 (1024 - 0), h: 768 (768 - 0) [00:00:00.000] 13100 WM_MOVE 2590|24 to 2590|24 (client pos to 2590|24) delta 0|0 for style -1879048192 [00:00:00.000] 13100 SystemLevelInit [00:00:00.000] 13100 Initializing Sim Memory Pools.... [00:00:00.000] 13100 DeviceIndependentGraphicsSetup ## [00:00:00.000] 13100 TheLoader Setup ## [00:00:00.000] 13100 Loading texture_POLAK.bin with 250 sets, 3471 tiles [00:00:00.000] 13100 Flush References - start Cleanup if we don't get anything below in log, something wrong in here ## [00:00:00.000] 13100 FlushReferences Cleanup ## [00:00:00.000] 13100 ObjectLOD Cleanup ## [00:00:00.000] 13100 TheTextureBank Cleanup ## [00:00:00.000] 13100 ThePaletteBank Cleanup ## [00:00:00.000] 13100 TheColorBank Cleanup ## [00:00:00.000] 13100 Info: 3DDB is *new* format (more than 2GB supported) [00:00:00.000] 13100 Terrain: Load [00:00:00.000] 13100 Terrain max texID: 3991 [00:00:00.000] 13100 Theater's installed: TerrData\TheaterDefinition\Korea KTO.tdf [00:00:00.000] 13100 Theater's installed: Add-On Korea TvT\TerrData\TheaterDefinition\Korea_TvT.tdf [00:00:00.000] 13100 GetCurrentTheater Korea KTO [00:00:00.000] 13100 TheaterReload [00:00:00.000] 13100 theaterPath 'C:\Falcon BMS 4.36\Data\Terrdata\korea' [00:00:00.000] 13100 terrainPath 'C:\Falcon BMS 4.36\Data\Terrdata\korea\terrain' [00:00:00.000] 13100 Loading texture_POLAK.bin with 250 sets, 3471 tiles [00:00:00.000] 13100 objectPath 'C:\Falcon BMS 4.36\Data\Terrdata\objects\KoreaObj' [00:00:00.000] 13100 Flush References - start Cleanup if we don't get anything below in log, something wrong in here ## [00:00:00.000] 13100 FlushReferences Cleanup ## [00:00:00.000] 13100 ObjectLOD Cleanup ## [00:00:00.000] 13100 TheTextureBank Cleanup ## [00:00:00.000] 13100 ThePaletteBank Cleanup ## [00:00:00.000] 13100 TheColorBank Cleanup ## [00:00:00.000] 13100 Info: 3DDB is *new* format (more than 2GB supported) [00:00:00.000] 13100 GetCurrentTheater Korea KTO [00:00:00.000] 13100 Reading CT data from XML -> C:\Falcon BMS 4.36\Data\Terrdata\objects\Falcon4_CT.XML [00:00:00.000] 13100 Reading CT data from XML -> Done, 4361 entries [00:00:00.000] 13100 ------------------------------------------------------------------------------ [00:00:00.000] 13100 ~ Loading XMLs took ~ 0.676 seconds [00:00:00.000] 13100 ------------------------------------------------------------------------------ [00:00:00.000] 13100 Reading Mission data from XML -> C:\Falcon BMS 4.36\Data\Campaign\MissionData_XX.XML [00:00:00.000] 13100 Could not open visid.map [00:00:00.000] 13100 Terrain: Unload [00:00:00.000] 13100 Terrain: Load [00:00:00.000] 13100 Terrain max texID: 3991 [00:00:00.000] 13100 SoundDriver 0x00000000184D3580 [00:00:00.000] 13100 Sound SetCooperativeLevel HWND=0x50742 [00:00:00.000] 13100 CreateSoundBuffer [00:00:00.000] 13100 QueryInterface IID_IDirectSound3DListener [00:00:00.000] 13100 Listener SetDistanceFactor [00:00:00.000] 13100 Reading comm data from XML -> C:\Falcon BMS 4.36\Data\Sounds\commfile.xml [00:00:00.000] 13100 Reading eval data from XML -> C:\Falcon BMS 4.36\Data\Sounds\evalfile.xml [00:00:00.000] 13100 Reading frag data from XML -> C:\Falcon BMS 4.36\Data\Sounds\fragfile.xml [00:00:00.000] 13100 SFX loading took 1679 ticks [00:00:00.000] 13100 Version: R26443. 1.36.EBS.4_ | Jul 2 2022 | 18:15:20 | MSVC 1929 [00:00:00.000] 13100 Couldn't open Icer rules file, loading default rules instead [00:00:00.000] 13100 Icer's rules are in old file format [00:00:00.000] 13100 GlobalSimpleThread starting 15 worker threads [00:00:00.000] 13100 SystemLevelInit finished [00:00:00.000] 13100 SimulationLoopControl::StartSim [00:00:00.000] 13100 #Checksum ac.dat 3608df02 [00:00:00.000] 13100 * SplashScreen has been visible for 4.3 seconds [00:00:00.000] 13100 * ..continue showing it for another 1.7 seconds [00:00:00.000] 13100 3D device is not set up; checking DXGI and D3D11 support... [00:00:00.000] 13100 Found DXGI support [00:00:00.000] 13100 Created DXGIFactory [00:00:00.000] 13100 Enumerating available adapters... [00:00:00.000] 13100 Adapter: 0, Name: NVIDIA GeForce RTX 3090, DedicatedVideoMemory: 24348 MB, DedicatedSystemMemory: 0 MB, SharedSystemMemory: 32735 MB [00:00:00.000] 13100 Adapter: 1, Name: NVIDIA GeForce RTX 3090, DedicatedVideoMemory: 24348 MB, DedicatedSystemMemory: 0 MB, SharedSystemMemory: 32735 MB [00:00:00.000] 13100 Adapter: 2, Name: NVIDIA GeForce RTX 3090, DedicatedVideoMemory: 24348 MB, DedicatedSystemMemory: 0 MB, SharedSystemMemory: 32735 MB [00:00:00.000] 13100 Adapter: 3, Name: Microsoft Basic Render Driver, DedicatedVideoMemory: 0 MB, DedicatedSystemMemory: 0 MB, SharedSystemMemory: 32735 MB [00:00:00.000] 13100 Selecting adapter 0 from user settings [00:00:00.000] 13100 RendererD3D11::cleanupDeviceResources... [00:00:00.000] 13100 DeviceDependentGraphicsCleanup(nullptr); [00:00:00.000] 13100 DeviceDependentGraphicsCleanup ## [00:00:00.000] 13100 TheTextureBank.onDestroyDevice(), ObjectParent::FlushReferences() command count: 0 [00:00:00.000] 13100 ThePaletteBank.FlushHandles() [00:00:00.000] 13100 GlobalSimpleThread.WaitForLoader() [00:00:00.000] 13100 DeviceDependentGraphicsCleanup DONE ## [00:00:00.000] 13100 TextureManager::onDestoyDevice size: 0 [00:00:00.000] 13100 TextureBankClass::DelayedRelease(force) [00:00:00.000] 13100 Release 0 delayed resources [00:00:00.000] 13100 Release 0 delayed resources DONE [00:00:00.000] 13100 SwapChainImageBufferD3D11::Cleanup cleaning back buffer view 0000000000000000 [00:00:00.000] 13100 Upcoming device release. 0 delayed resources. [00:00:00.000] 13100 RendererD3D11::cleanupDeviceResources...ok [00:00:00.000] 13100 RendererD3D11::createDeviceOnAdapter(): Creating 3D device on adapter 0: NVIDIA GeForce RTX 3090 [00:00:00.000] 13100 Please run without a graphics debugger attached. [00:00:00.000] 13100 Could not create device on adapter [00:00:00.000] 13100 WM_ACTIVATE 0 (minimized state 0), window handle being activated 590926 [00:00:00.000] 13100 FalconMainWindowD3D11::handleOnActivate 1->0 [00:00:00.000] 13100 WM_ACTIVATEAPP 0, new active window thread 16368
-
@Icer said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Tumbler31 said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Icer it worked and now it doesn’t anymore? That’s curious, did you change something in between?
And please share the full dump and post post the text file logs files here, I might have a look on my phone
Ok, bit the bullet and ran the Display Driver Uninstaller (DDU v18.0.5.2) completely cleaning out all NVidia drivers\registry\etc., then ran NVCleanstall 1.13.0 to install the drivers\PhysX\NVidia HDMI sound. Now my sound display is:
.
Have no idea what it fixed, but now 4.36.1 starts up again, I’ll let you know if its temporary or not…
-
B Bad Boy has marked this topic as solved on
-
I Icer has marked this topic as unsolved on
-
@Icer said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Icer said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Tumbler31 said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Icer it worked and now it doesn’t anymore? That’s curious, did you change something in between?
And please share the full dump and post post the text file logs files here, I might have a look on my phone
Ok, bit the bullet and ran the Display Driver Uninstaller (DDU v18.0.5.2) completely cleaning out all NVidia drivers\registry\etc., then ran NVCleanstall 1.13.0 to install the drivers\PhysX\NVidia HDMI sound. Now my sound display is:
.
Have no idea what it fixed, but now 4.36.1 starts up again, I’ll let you know if its temporary or not…
Like my favorite boomerang, error is back. All I did was update Win11, going to reboot to see if it clears but WTH… Wondering now if it has anything to do with my HP G2v2 VR headset being plugged in (but turned off)… And lo and behold a reboot allows me to start BMS… sure would be great to KNOW why this is happening…
-
@Icer when this error occurs – confirm, you’re still getting audio from the SBX-G6 device? (youtube etc all work ok?)
Start / Run / “DevMgmt.msc” … no yellow flags, errors or warnings on the device?
Next time it happens, maybe try disable/reenable from devmgmt UI, in lieu of rebooting. Just to potentially narrow down if that driver is a cause.
-
@airtex2019 said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
@Icer when this error occurs – confirm, you’re still getting audio from the SBX-G6 device? (youtube etc all work ok?)
Start / Run / “DevMgmt.msc” … no yellow flags, errors or warnings on the device?
Next time it happens, maybe try disable/reenable from devmgmt UI, in lieu of rebooting. Just to potentially narrow down if that driver is a cause.
Hiya @airtex2019 - Error is back today, starting to think it may be something to do with using my VR Headset between staartups but I digress…
To your points-
Yes, sound works fine in YT before and after I get the error.
No yellow flags or errors in Device Manager (for anything)
“Disable Device” then “Enable Device” for Sound BlasterX G6, same error.I also have listed (Under Sound, Video, Game Controllers) the "Nvidia High Definition Audio, Realtek USB2.0 Audio, and Sound BlasterX G6. I disabled all but the G6, same error. I then disabled the G6 and tried it, BMS splash screen appears and then CTD’s with no error. Then uninstalled the Realtek, enabled the G6, same error is back… will reboot with VR headset turned off, see what I get.
Rebooted, starts right up…
Ok, may be on to something. Ran a VR (Steam) sim and exited, went back to start BMS and got the adapter error again! Maybe it’s detecting and trying to Start the VR (HP G2v2) adapter?
EDIT: Rebooted, VR off, BMS starts right up.
-
Your VR headset might create a virtual audio device to mirror the desktop audio (I know virtual desktop does that with my quest2)
I wonder if that audio device isn’t destroyed properly after you used it.
Might be something to investigate…
-
@MaxWaldorf said in Just updated - now I get the dreaded "Could Not Create Device on Adapter" error..:
Your VR headset might create a virtual audio device to mirror the desktop audio (I know virtual desktop does that with my quest2)
I wonder if that audio device isn’t destroyed properly after you used it.
Might be something to investigate…
Sounds logical, but if it doesn’t show up in Sound Devices not sure where to look… i’ll ask on the HP G2 Discord, may get a clue there. I have removed my HP G2 speakers so I may use my Sennheiser headset with mic while playing (or earbuds), but it still may be running drivers for them… I have tested this out several times and I am 99% sure starting the HP G2v2 initiates Windows Mixed Reality Portal and must initialize it’s drivers as BMS crashes every time after I do this…
-
M MaxWaldorf marked this topic as a regular topic on