Weapon Delivery Planner released
-
@Magic49th Our sqdrn standards are 1X, 64X, 64Y, 1Y for the first four ship, flight two is 2X and three is 3X. If you have a sec could you check that? Not above a brainfart on my level, but I’d tried it multiple times… thanks.
-
Please clarify (show) what you want to do and what doesn’t work.
I’ll try a repro then.cheers
Magic -
l@Falcas, this discussion occurred on the Falcon Lounge Discord.
-
Guess the package frequency is 302.850 as Warhawk 2 is the package lead flight?
Don’t really see any issue
-
@Falcas Installed the latest WDP, works well in BMS 4.37. thanks for a brilliant application.
-
@Magic49th Figured it out somewhat, the datacards were changed to 1X-64X, etc. and saved. I must have been re-opening the unchanged file to recheck everything. Not sure I’d seen this in the past but no issue exists with being able to change and save as before.
Thanks -
@Falcas Then what is the purpose of putting this in WDP
instead of 302.850? -
@jc1
Why put 308.850 there as its already shown at the packages.Each and every flight callsign has a frequency assigned to it.
Sentry 4 frequency is 357.775
(or whatever the theater builder set it to)This way you have both frequencies.
-
@Falcas Your typo “Why put 308.850” (s/b 302.850) had me looking for something that wasn’t there. After getting past the typo, I get it. I’ve always used preset 6 to contact AWACS. When I tried the frequency I saw in WDP at the Support block of the DataCard, I thought that was the same as the tactical frequency. Now I realize that WDP shows the AWACS tactical frequency in the Callsign Pack block of the DataCard, and that frequency is used by all members of the package as well as the AWACS assigned to the package. The frequency I see in the Support block of the DataCard is for the not yet implemented Check In. Thanks to you, @LorikEolmin and @MnMailman for clarifying my brain on this.
-
@Falcas - I am getting something odd when setting up a HADB profile. when looking at the map in WDP under the profile it doesn’t matching up with the map in BMS also the STPT locations and PPTs don’t match the mission either. Here is what WDP shows vs. what BMS is showing. Thoughts?
-
@Gadfly same here, any solution so far?
I tried forcing all pages set to Blank, in WDP, and save the kneeboard again, but didn’t work.
-
@Albatroz Nope. I’ve found that even if I back up the original DDS files, then copy them back after changing them with WDP, the problem remains. I’ve also noticed that this happens with any DDS file in 4.37, so it may not be strictly an WDP issue. (For example, copying in a modded cockpit texture just causes the cockpit to disappear.)
Not sure what’s going on. I’ve ruled out quarantine by Windows Security, I think.
-
@Gadfly yeah, lucky us, the update fixed the issue, on my end at least.
Kneeboard wise, I’ll stick to the EZBoars, more than enough for the missions.
-
@Falcas I noticed something wrong with Fuel when a TE mission( already in flight) is loaded …
Check please the screenshot below : the TO Fuel should be 9994 instead of 5394 ( even if there is no TO) but above all, max fuel of aircraft is wrong ( 5594) , it also should be ~12200
-
@suhkoi69 said in Weapon Delivery Planner released:
Check please the screenshot below : the TO Fuel should be 9994 instead of 5394
In your screenshot it is 9994, so where is the problem?
-
@Falcas said in Weapon Delivery Planner released:
@suhkoi69 said in Weapon Delivery Planner released:
Check please the screenshot below : the TO Fuel should be 9994 instead of 5394
In your screenshot it is 9994, so where is the problem?
On the kneeboard.
-
@Falcas in fact here, what bothers me the most is the erroneous value of the admissible quantity in the chosen configuration (block 50 +2 external tanks )
the value should be 12200lbs ( instead of 5594) and why it is important here ?-> this value influences the data on left side of datacard ( here hidden by the loadout window) for determining the bingo -
@suhkoi69 said in Weapon Delivery Planner released:
@Falcas in fact here, what bothers me the most is the erroneous value of the admissible quantity in the chosen configuration (block 50 +2 external tanks )
the value should be 12200lbs ( instead of 5594) and why it is important here ?-> this value influences the data on left side of datacard ( here hidden by the loadout window) for determining the bingo
Yes, there is something not ok in case the AC has already used fuel (aka in flight)
But this has totally no influence on the bingo (left side of the datacard)
-
@Falcas my bad! I confused it with something else
-
@suhkoi69 said in Weapon Delivery Planner released:
@Falcas my bad! I confused it with something else
No worries.
Basically the amount of fuel is only used during the takeoff performance calculation. Which had the correct value already.
So it was only a wrong fuel value written on the Datacard. (Which has been fixed)Another change, the T/O fuel is no longer shown in case the flight is airborne.
Block fuel remains, although the name shouldn’t be taken literal as its the fuel the AC still has at that moment.Still working on something else which is the set initial fuel. Yes you can set the amount before takeoff lower than maximum.