NWS problem
-
lazystone, what exactly are you up to… this time?
Rightstuff, I assume it hasnt changed but some things do over time - it wouldnt be the first time I have quoted such a T.O. and been told that its not the case anymore.
I checked the greek CJ -1 (T. O. GR1F-16CJ-1), and the one I have is over a decade old… and its not for a USAF jet. I have an older USAF one, but it is for the A/B model… and it does not mention anything about the NWS not working after an alt release.
-
I checked the greek CJ -1 (T. O. GR1F-16CJ-1), and the one I have is over a decade old… and its not for a USAF jet. I have an older USAF one, but it is for the A/B model… and it does not mention anything about the NWS not working after an alt release.
Both NWS and LG system are powered by the ‘B’ System Hydralic. The thought being if the ‘B’ System Hydralic fails it can’t lower the LG or power the NWS.
It sounds like the NWS should work when the AAR door is open. However the AAR door overrides the NWS light.
I don’t understand why there is not a warning for the AAR door being open. I’ve flown missions and didn’t reliese it was open until I had to pull high g’s.
-
there is a light on the indexer for AAR door open…
and yes, they both run off hydraulics B. thought or not though, that doc does state that
The NWS is electrically controlled using dc bus No. 1
power and is hydraulically operated using system B
pressure. Steering signals are provided through the
rudder pedals. Should NWS be engaged with the
rudder pedals displaced, the nosewheel drives to the
rudder pedal commanded position. NWS is limited to
32 degrees in each direction; however , turn radius can
be reduced by using inside brake. NWS is
automatically disengaged when the NLG strut is
extended. NWS is not available following an
alternate LG extension and may not be available
anytime the nosewheel WHEELS down light is not
illuminated. -
Hello guys
I have a problem with NWS.
When I start the mision, in Taxy, for example….if I push NWS button…NWS works,all ok, indexer light…all ok
Well, I take off and return to base to landing…touch down and the NWS button doesn´t work. No NWs and, of course, no indexer light.
I´ve made this test using the NWS option in setup, but the same result.
By the way…I´m using Kolbe keymap and deejay cougar profile, with all the Cougar setting as DiretcX buttons.
Any idea to solution this problem?
Thanks in advance.
You should be using button 5 on the cougar stick to engage NWS. On the ground can you turn on/off/on/off etc etc (confirmed in right eyebrow) ?
You speak as if this is a constant problem to you and as its highly unlikely that you are deploying the landing gear with the emergency ALT Release (why would you? ) thats sounds like a non issue despite being spoken much about here.
-
Wondering if any of this is related to the NWS-cycle and the AAR disconnect being the same switch/keybind?
Also whether the weight-on-wheels function has any impact with respect to the OP?
-
there is a light on the indexer for AAR door open…
and yes, they both run off hydraulics B. thought or not though, that doc does state that
Yes, the AAR door light is next to the switch. It’s hard to see.
And I can see why the alt LG would have to disable steering hydraulics to rotate the nose wheel 90* with the gas system after exiting the wheel well.
-
Yes Blue……thas was the problem, using Alt G (Alt Gear) when I have to use Ctrl G (Down Gear).
Thank you very much
-
Yes, the AAR door light is next to the switch. It’s hard to see.
And I can see why the alt LG would have to disable steering hydraulics to rotate the nose wheel 90* with the gas system after exiting the wheel well.
I think we must be talking about different lights here…
I was talking about the light on the right indexer, which indicates your AAR switch is open.
I also noted that NWS is not disabled by having the AAR door open, but you cannot toggle it with the door open.
NWS is on…
so I turn the AAR switch…
To “OPEN”
I then get the RDY Indexer light…
Until I hit the NWS button again…
glad you got it sorted Skorp.
-
Wondering if any of this is related to the NWS-cycle and the AAR disconnect being the same switch/keybind?
Also whether the weight-on-wheels function has any impact with respect to the OP?
funny to dig this post up from last year. Flounder and I just flew a mission that i had to back out of due to an apparent glitch (not a constant problem as alluded to in OP, which I hope has been fixed by now! ) where my NWS would not activate on ramp start. button worked (cycled AAR door, pressed button and disconnect was initiated, confirmed AAR door closed after) and no faults were detected in any system. backed out to desktop, rejoined, everything worked perfectly.
-
funny to dig this post up from last year. Flounder and I just flew a mission that i had to back out of due to an apparent glitch (not a constant problem as alluded to in OP, which I hope has been fixed by now! ) where my NWS would not activate on ramp start. button worked (cycled AAR door, pressed button and disconnect was initiated, confirmed AAR door closed after) and no faults were detected in any system. backed out to desktop, rejoined, everything worked perfectly.
As other posts have talked about I’d bet you accidentally initiated the Alt Landing Gear which automatically disables NWS. I’ve never had the NWS not engage from a ramp start. The next time you see this try to right click on the Alt Landing Gear handle to reset it and see if the problem goes away. If it does I’d look at your key file/HOTAS config to verify that you don’t have a goof there.
-
it was during ramp start. there was literally no way i accidentally pressed alt+g, which i have confirmed set for alternate.
but it was something (among the myriad odd other things) that we didn’t think to check, and will in the future. -
The alt gear handle (and it’s pneumatic pressure vent button) are both clickable and they are dangerously close to the canopy lever and TW AUX panel. As far as AAR door being open. I think NWS works while the door is open but the button to toggle NWS on and off is being used so you’re stuck in whatever state NWS is in while the door is open.
-
now there, sir, you may have a point….i wonder if i clicked it
and if so, if the WOW switch affects it. I’ll do some testing later tonight. -
now there, sir, you may have a point….i wonder if i clicked it
and if so, if the WOW switch affects it. I’ll do some testing later tonight.WOW switch should not affect ALT gear at all. IIRC
-
WOW switch should not affect ALT gear at all. IIRC
Current WOW doesn’t affect alt gear extension or AAR door function. Both work on the ground just fine.
-
I think I have messed up my NWS command. In the keystokes “shift+/” was listed as “ICP comms 1” but in fact did engage NWS. I wanted the command assigned to a button on my joystick so went and assigned it, now that button does something to my DED probably “ICP comms 1” as it was listed, and now when I press “shift+/” on the keyboard nothing happens. So how do I re-assign the keyboard mapping back to NWS?
-
Look for missile step in the key commands and use that for you joystick button. It is the same switch in the pit that operates NWS w/ weight on wheels and performs the missile step function while airborne. The bonus is now you have a switch that has two functions on your stick!
-
Look for missile step in the key commands and use that for you joystick button. It is the same switch in the pit that operates NWS w/ weight on wheels and performs the missile step function while airborne. The bonus is now you have a switch that has two functions on your stick!
Plus FCC submodes.
-
-
Wow thanks guys, works a treat, now I have my NWS right next to my wheel brakes button for my thumb to operate, make landings so much easier.
Happy Days