Burner's Harpoon MOD Pilot Legs Tutorials
-
Note: The 8018 and 8019 dds files in the C:\Falcon BMS 4.32\Data\Add-On Israel\terrdata\israel\objects\KoreaObj folder
are independent from the C:\Falcon BMS 4.32\Data\Terrdata\objects\KoreaObj folder.Thanks to Harpoon for the Pilot Body and Jomla for the Korea/Israel kneeboard dds files including Red Dogs Korea maps!
-
Note: The 8018 and 8019 dds files in the C:\Falcon BMS 4.32\Data\Add-On Israel\terrdata\israel\objects\KoreaObj folder
are independent from the C:\Falcon BMS 4.32\Data\Terrdata\objects\KoreaObj folder.Just a small correction about Israel kneemap
https://www.benchmarksims.org/forum/showthread.php?13720-ISRAEL-THEATAR-KNEEMAP-FOR-PILOT -
Haha thanks Jomla! Great work on the Korea and Israel kneeboard dds mods!
-
Thanks for this Burner. Have been through the instructions now twice to the letter, but cannot see the pilot legs. The OGLLOD view just shows the normal cockpit. Only anomalies I can think of are that in the Readme, you suggest loading up āloaded.lodā, and in the video itās ālegs onlyā. Also, after the dialog box that confirms Iāve replaced 8018, I get another box up called Mode Texture Vertex Edit (showing nothing), which I therefore cancel. I then continue with selecting legs only.lod and get the dialog box re. it being out of size etc. After closing it down though - still no legs!
Any ideas?
-
This was posted on the BMS forums about some error installing this: āI had the same issue. it is a corrupted Microsoft .Net Framework. Click on that in your āAdd/Remove Programsā and it should give you the option to āRepair fileā I did that and it fixed my problem. Everything works fine now.ā Try reinstalling Net Framework
-
Thanks to Harpoon for the Pilot Body and Jomla for the Korea kneeboard maps!
did Jomla create the kneeboard? or did he converted from work somebody else did?
-
Have now repaired my MS Net Framework 4 programmes, but same result. Iām suspicious about the Mode Texture Vertex dialog box appearing (and it showing nothing in this box) - I couldnāt see that in your vid. Iām also not seeing any āchange in appearanceā after clicking on the Different Size dialog warning - it just goes back to the usual LOD screen.
This was posted on the BMS forums about some error installing this: āI had the same issue. it is a corrupted Microsoft .Net Framework. Click on that in your āAdd/Remove Programsā and it should give you the option to āRepair fileā I did that and it fixed my problem. Everything works fine now.ā Try reinstalling Net Framework
-
@Red:
did Jomla create the kneeboard? or did he converted from work somebody else did?
Hee RD, i use the kneeboard updater also and it has 2 options
1)use a own jpg that the program converts and uses in the 8019.dds
2)point the updater to the WDP datacard directory and it will use the created datacard from WDP and then convert that to 8019.ddsThe program only exports the 8019.dds to the default korea object theater. (no other theaters so you have to copy paste or do workaround with MKlink files)
As work around for other theaters i did the following:
create a MKlink shortcuts that points to the default korea directory 8018.dds
in this way every theather is using the same 8019.dds file (the default korea directory)-goto the campaign objects folder where you want to create the 8019.dds file
-open from there a dosbox
-create a mklink to the default korea object 8019.dds (where the origin is)for example:
your dosprompt is in:
d:\Falcon BMS\Data\Add-On Israel\terrdata\Israel\objects\KoreaObjthen next command will make a mklink to stock korea directory:
mklink /h 8019.dds D:\Falcon BMS\Data\Terrdata\objects\KoreaObj\8019.dds -
Thanks Spit
AFAIK, thereās no 8018.dds in the default install. that one is installed/ converted with harpoon pilotās
So my question remainswhen i read this:
and Jomla for the Korea kneeboard maps!
and i see my work being modified and used,
http://www.candyparty.com/ST/Download/Checklists/BMS/maps/Korea_ONC_tacanranges.png
I kind of have hairs going straight in the back of my neck !!i have no problem with the files being used, matter of fact i gave harpoon permission in the past for some files, because he was kind enough to ask
but crediting other ppl makes me go mmmh -
yup true,
i think i missed that. Also saw that i was talking about 8018 (which is the pilot body) and i ment 8019 (kneemaps). -
In some earlier threads, someone talked about omitting the step where you select LOD 82ā¦ could this have something to do with this not working for me?
-
Red Dog, thanks for creating the original map I didnāt realize that. I thanked Jomla for creating the dds kneeboard picture including freqs for both Korea and Israel.
-
In some earlier threads, someone talked about omitting the step where you select LOD 82ā¦ could this have something to do with this not working for me?
82 only applies to the Korea theatre.
-
No luck with this either. Followed instructions to the dot. Repaired .NET framework, still no legs. giving up
-
No luck with this either. Followed instructions to the dot. Repaired .NET framework, still no legs. giving up
For which theatre did you try this for?
Are u running LOD editor in Administrator mode? -
I just started flying BMS so I dont have any other theaters or mods than what the release already comes with. So only the default Korean theater. And yes, I am running the LOD editor as administrator. Im running Win 7 64-bit so Iāve tried running it in different compatibility modes and still no legs.
-
As per last poster, running W7/64, Korea theatre - MS Net Framework updated. No legs, no change in appearance of LOD, and this extra screen after confirming replacing the dds files (Mode Texture Vertex etc). Real shame since this such a good mod, but seems no-one can helpā¦
-
I installed the pilot legs and kneemap yesterday (W7/64) and it worked fine. I even installed the full pilot body at first by mistake but replaced it with only legs later.
I used Burners install method in post 1 to the point.(Thanks again Burner)1. !!!Create a backup of files (not folders) in: \Falcon BMS\Data\Terrdata\objects!!!
2. Put 8018.dds and 8019.dds files in \BMS\Data\Terrdata\objects\KoreaObj
3. Open LOD Editor, enter ā2ā in the box next to ānormalā
4. Click on ānormalā, then ā1ā under āEditā
8. Click on āSelect LODā
9. ***Select LOD no. 82, Click āokā in the pop-up dialog box.
10. Select Action Append/replace texture
11. Select 8018.dds and seperately8019.dds
12. Click on āActionā replace model
13. Choose āonlylegs.lodā from the archive.
14. When the LE changes appearance you can close it down.
15. Enjoy your new body!Remember, do not select LOD no. 82 in step 9 but just click āokā in the āSelect LODā pop-up after step 8 to close the popup. First time i tried to install i skipped step 8 or just closed the pop-up, by clicking the red cross or cancel(i canāt remember excactly) but that didnāt work. I noticed if you do not click āokā, the LOD data screen does not change but it does after clicking āokā.
Edit:
I just tested without clicking āokā but closing the āSelect LODā pop-up by clicking the red cross in the upper right corner of the popup and then i also get the Node Texture Vertex Edit box, so that might be the problemAfter that perform step 10 and 11 twice, once for 8018 dds and twice for 8019 dds
Make sure to choose the right option from the action menu, i myself made that mistake more than once :uham:
You should indeed not get the Node Texture Vertex Edit box, at least i did not get it, there should only be the box which indicates de dds is replaced.So no problems in W7/64 here and just for info i have frameworks 4.5.1 installed.
I know youāre an experienced Falcon Driver and i guess you used LE more than i did so it might be a stupid question, but did you copy mfc71.dll and msvcr71.dll to the windows/system and system32 directories?
So far my thoughts, maybe it helps,Greetz Terminator
-
If you put the dds files right into the Korea.obj folder, then you can skip step 10 and 11. (As an added note, you can select more than one .dds file at a time)
Perhaps an easier way to do the same:
1. !!!Create a backup of files (not folders) in: \Falcon BMS\Data\Terrdata\objects!!!
2. Put 8018.dds and 8019.dds files in \BMS\Data\Terrdata\objects\KoreaObj
3. Open LOD Editor, enter ā2ā in the box next to ānormalā
4. Click on ānormal.ā Then above the āLOD Indexesā box, click āEdit Modeā once and it should change to āReplace Modeā
5. Click on ā1ā then select āonlylegs.lodā from the archive.
6. When the LE changes appearance you can close it down.
7. Enjoy your new body! -
Thx Terminator and Pumpyheadā¦ Will try again when I get home. I had only copied the dll files to the System 32 folder so maybe an issue there.