X52 PRO Profile by Scuby
-
Just wanted to say thanks for this profile - as with mmaclauchlan, yours is the only one that’s worked for me!
-
Hello can you tell me how to use flares or smoke?
-
Hi Dartuil,
Check PM!
Chaff/Flare require to be programmed manually in your DTC. In the cockpit, use the [EWS PGRM +/-] on the stick (shifted left and right @ stick rotary) to switch between your 4 Chaff/Flare programs. Use the [CMS UP] button (button A @ stick) to execute 1 sequence of your selected Chaff/Flare program.
Smoke is not part of the stick profile. The key command for smoke is CTRL + S. You may easily add it to the profile, just customize it the way you like it best!
Have fun!
Cheers,
Scub -
Thank you.
-
Thanks Scuby, I’ll try this one out for sure.
-
the profile isn’t hosted anymore (link is dead)
-
Just tried it JohnDoe. Works here.
-
the profile isn’t hosted anymore (link is dead)
Hey mate I had no issues downloading it. Link should still be ok.
-
Ice, sabre, thanks for checking. Link is OK!
Cheers
Scub -
Update Jan/01/2015:
-Added ACMI ON/OFF to Shifted T2
-Rotated INSTR. LIGHTS TOGGLE & NIGHTVISION ON/OFF on T4
-Reassigned key DMS UP to be future proof
-Added BMS settings pics in download package
-Updated Profile picsInstallation:
Download the updated package (.rar) here: http://bit.ly/scubyflying (Refresh the download page).
Replace the .pr0 file into your Saitek SST software.
Replace the .key file into BMS.Cheers,
Scub -
Thanks, Scub. Can’t wait to try out the new profile tomorrow!
-
I just got back into BMS and love the profile but… how do you lock a target with the radar cursor? there is no key assigned to the keyboard or stick? im lost haha
Edit…. well now i feel dumb i figured it out haha…
-
I just got back into BMS and love the profile but… how do you lock a target with the radar cursor? there is no key assigned to the keyboard or stick? im lost haha
Hi!
Place your radar cursor over a contact, then, use TMS UP on your flightstick to bug the contact. I’d suggest further read in the manual.
Cheers,
Scub -
haha yup… i was looking too much into the key mapping… and they had some button labeled “radar-designate target” which i fixated on because it wasn’t mapped to anything… I read the Manuel and figured it out.
Thanks for the profile, and feedback!
-
Import the .key file into BMS.
Hi Scuby ! I have a simple question about importing the .key file : how do you do ? Thank you for sharing your profile ! -
Import the .key file into BMS.
Hi Scuby ! I have a simple question about importing the .key file : how do you do ? Thank you for sharing your profile !Copy the keyfile to the folder …. C:\Falcon BMS 4.32\User\Config
Start BMS; go to SETUP --> CONTROLLERS. On the lower right side choose LOAD. Select your keyfile from the list and LOAD. Choose SAVE.
Be sure to set up any axis controls in the ADVANCED area of the controller set up.
-
Thanks for profil file.
-
Update Jun/06/2015:
-Re-assigned keys for 1st and 2nd Trigger Detent
-Solves simultaneous key conflicts, e.g. allows manual-laser with VHF/UHFInstallation:
Download the updated package (.rar) here: http://bit.ly/scubyflying (Refresh the download page).
Replace the .pr0 file into your Saitek SST software.
Replace the .key file into BMS.Cheers,
Scub -
thanks a lot Scuby. Works like a charm. Beers on me buddy :drink:
-
I’m having trouble getting this to work. None of my joystick buttons are working… I’m sure I must have missed something obvious. I hope somebody can help!
I’m using an X52 Pro with the latest driver and profiling software downloaded from Saitek. I followed the instructions on how to install Scuby’s X52 Pro profile into the Saitek software and into BMS. I selected the pr0 file in the Saitek software, and loaded the .key file into BMS. Then I set up the axes in BMS as per the screenshots. I noted that the axes and rotation controls all appear to work correctly in the setup window, including the range and elevation controls. However most of the buttons don’t seem to do anything in the Setup window. In fact, the only response I can get is from the Saitek left MFD button (unassigned), and Shift-Trigger, which is mapped to HOTAS-CMS.
When in the air, I can control the plane (ailerons, elevator, rudder, throttle all work correctly), but none of the joystick or throttle buttons work. The radar elevation wheel control does work. However the range wheel control and the mouse/cursor don’t work.
The X52 Pro LCD display shows that it’s in F16 HOTAS mode, and the correct text appears on the LCD when I press any of the buttons.I’m using BMS 4.32 with updates 1-7, on Windows 7 Pro x64. I tried deleting and reinstalling BMS but still have the same problem.
I feel like I must have overlooked something really obvious. Does anyone have any ideas?