LAN not working
-
you can’t ping in neither the one to the other, or is the ping problem only on one side?
-
I can’t ping in either sides (for the tablet I haven’t tried, don’t know how to ping with android) . But all go on the Internet…
-
What are the IP addresses/netmask/default gateway on each device?
Open a command prompt and type ipconfig and display the results.
-
What are the IP addresses/netmask/default gateway on each device?
Open a command prompt and type ipconfig and display the results.
I have set for these devices static IPv4 addresses
192.168.0.xx
192.168.0.yy
192.168.0.zzall have the same gateway (the router IP)
192.168.0.1
and also DNS primary is set to this address (192.168.0.1).
Netmask is the default 255.255.255.0
-
I think because of the Routerchange, your Win8 Computer means it is another Network and because of that it starts protected (Windows XP didn’t had that “smart” network management).
You can merge Networklocationsettings in the [“Netzwerk- und Freigabecenter” | “Network- and Sharingcenter” | “Centro rete- e condivisione”] by clicking on the Icon for [“Sittingbank” | “Company house” | “Private house”],
in the panel choose [“Netzwerkadressen zusammenführen oder löschen” | “Merge or delete networkadresses” | “Aggiungi o rimuovi indirizzi di rete”].
Otherwise you have to set up the network, permission and firewall rules from start (shouldn’t be much either).Also in the “Network- and Sharingcenter” select [ “Erweiterte Freigabeeinstellungen änder” | “Advanced Sharingoptions” | “Opzioni di condivisione avanzate”] on the left side of the window.
Select the “Private and working place” section, and check [ “Netzwerkerkennung einschaltung” | “Networkrecognition” ] -
I thinks because of the Routerchange, your Win8 Computer means it is another Network and because of that it starts protected (Windows XP didn’t had that “smart” network management).
You can merge Networklocationsettings in the [“Netzwerk- und Freigabecenter” | “Network- and Sharingcenter” | “Centro rete- e condivisione”] by clicking on the Icon for [“Sittingbank” | “Company house” | “Private house”],
in the panel choose [“Netzwerkadressen zusammenführen oder löschen” | “Merge or delete networkadresses” | “Aggiungi o rimuovi indirizzi di rete”].
Otherwise you have to set up the network, permission and firewall rules from start (shouldn’t be much either).Thanks SnowSky, could you give me mode details? I have win8.1 in italian.
-
Sorry I have seen Win8 especially in italian rarely so I can’t give you further advices by memory. When I arrive at home I can make some screenshots so you can guess the position where you’d have to look for
-
What is the router make and model # ?
-
It’s a Sitecom WL-586, the one with only one lan port. But I use it only wireless.
-
Please post a screenshot of the “Wireless Settings > Advanced” and “Security” tabs from the router.
-
@.boomer.:
Please post a screenshot of the “Wireless Settings > Advanced” and “Security” tabs from the router.
I will this evening when I will be at home. Thank you.
-
I will this evening when I will be at home. Thank you.
I suspect your WLAN router prevents wireless devices from communicating with each other on the internal network.
Cheers, Uwe
-
hoover, do you know if there is a setting for this or maybe I shall change my router again?
-
This was my first assumption as well, however nothing in the documentation mentions this feature. Is there a reason the the server hosting the game cannot be wired, and the client on wireless only? Wireless is a shared medium, just like a hub, so having one host wired would help a lot with the contention (that you may be having).
-
@.boomer.:
This was my first assumption as well, however nothing in the documentation mentions this feature. Is there a reason the the server hosting the game cannot be wired, and the client on wireless only? Wireless is a shared medium, just like a hub, so having one host wired would help a lot with the contention (that you may be having).
Sorry, it’s not clear what you are saying. I just want to run MFDExtractor and the android ICP application, but my devices cannot see each others. Hope it’s more clear.
-
I mean, it’s better to have the server/Falcon PC connected to the wired port, and have only the tablet wireless.
-
Thanks to all. I have a new modem-router (ASUS DSL-N14U) and after the three minutes setup I have my WLAN perfectly working.
So the problem resides in the old modem. No need to investigate further.
Thank you mates!! -
Glad to hear you got it working, roccio. Sorry I couldn’t provide more details about where to look, I’m using a FritzBox! for my internal network and it has the option of firewalling wlan devices from each other (I even think it’s the default setting nowadays but I’m not sure).
Cheers, Uwe
-
Thank you hoover, but I think that the problem was caused by the first change of the modem. The first one and the second had the same SSID, so maybe my devices connectoed correctly to that network, but in a “strange” way. Just a tought!