@arbush I have a same issue with the BMS. If I want to use it on my laptop when I connect with HDMI to my 55" lcd TV. There is no sound. If my settings are clone the displays or extended. Only I have sound if I change my settings that the TV would be the first display. I have no other connection plug on my laptop just only one HDMI for external display. The top of that I have 2 GPUs in my laptop, one of in my CPU like an IGPU and one dedicated . the picture is hand over to the secondary display, but the sound seems to be not. And also have a problem, to not can be set the resolution different then on the first display This issue happen for me since 4.34.

@airtex2019

1. If I set display #2 (HDMI) in windows to main display and launch BMS in windowed mode(with BMS set to #1) it works fine (on Display #2 albeit windowed).
2. If I switch BMS to Full screen no sound. If I switch back to windowed still no sound.
3. If I launch BMS in full screen with it set to either #1 or #2 (leaving WIN main set to #2) No sound.

If I launch BMS set to Display #1 and WIN set to Display #1 the sounds comes out Display #2 the only way I can get sound back to laptop D1 is to unplug D2.
I tried multiple combinations it seems not to like Full Screen on Display #2 regardless of the setting combinations.

<blockquote>@Hypergraphe u did not press the button (comm button, not OSB6 on MFD) long enough </blockquote><p>Not sure that’s true, I think it’s just a mode-select on OSB6, then you need to start the CONT IDM round with the comms left switch, which highlights OSB6<br /><br /><br />But yay!!</p>

@Badger there are some cfg params which control some aspects of that, but I don’t remember all the semantics ottomh … consult technical-manual pdf set g_bExternalTrackIR 0 set g_bExternalTrackIROrientation 0 set g_bInvertExternalTrackIR 0

@Reaperdog1 , There is also a KOTAR-like bombing range in Mideast 128 theater, in the UAE just 20 miles south of Al Minhad airbase, though Mideast 128 theater conversion for use in BMS 4.36 is not yet complete (work is in progress to convert it). Regards, Tomcattwo (VoiceClone)

<p>@airtex2019 That realy was it!! Thank you all very much :)</p>

@linknet said in Question About Maps in HELIOS: Just for information, if you want to add a user defined map to the Full Ice Profile as opposed to the CPD Only Profile you have to add it to the “Map Viewer” in addition to the “Map Control”, the method is identical. Good to know Linknet, my profile is all hacked from the main Ice 4.35-10 profile. I took the Map and control buttons and placed them on the right edge of my "Monitor #1 (7860x1440) , placed gauges on the bottoms of my two MFD monitors, and use RTT (through Helios now of course) to display the MFDs… works great!

Thanks for your reply, I also had used 4.32 key file. However there are no problems. I think that’s because the 4.33 key file loading function has exceptional process to accept valid callbacks in the 4.33.