FoxVox Free voice control software for BMS
-
Hey foxster,
thanks for the update. I’m getting this error after installing v1.6 and your 4.36 library. The language is listed as english (uk) in foxvox.
All the best, Uwe
-
-
I managed to fix the error mentioned above by installing the
english us
language pack. Following a few reboots the 4.36 library would load fine in foxvox.
Cheers, Uwe
-
@hoover That’d do it
-
It looks like I need to go through the retraining process though as the recognition rate is really bad. I’ve got a bit of an english accent thanks to growing up opposite the local NAAFI in my home town.
It’s probably not possible to “convert” the library somehow so it works with english / uk?
Cheers, Uwe
-
@hoover you shouldn’t have to switch to en-us…just change the library language to the uk? version from the settings cog wheel menu next to the library name. Let me know if that doesn’t work, but you should be able to use it like you did before.
-
So does someone have a ready-to-use script for this with the usual ATC/wing commands?
-
@Logic go to @foxster 's library page that he mentions above : https://foxster.itch.io/foxvox-libraries . My library has all the radio comms from 4.36 with 2-3 keywords each. I like it like that because it is easier to remember. Hope it helps!
-
loading the library worked fine after the english/US language pack had been installed.
Before that I would see the error mentioned above, but now all seems to work fine.
For AWACS I added some more words like “century” and “chavez” which the system now picks up as “sentry” and “chalice”
All the best, Uwe
-
@hoover
Nice those ones, dear Uwe.
Especially if they are fit, I mean.With best regards.
-
@foxster thank you for this awesome tool
-
@njenga5 You bet, and thanks - hope you like it!
-
Having an issue with PTT function.
Have set up the PTT in global settings and mapped the keys.
But it’s not working for some reason, can see that voice is being heard but get the constant Push-To-Talk preventing message on every command.
Tried setting the PTT sounds up and they appear to not not work either.
Have tried different keys/buttons/controller etc but always the same issue.
Any ideas? -
@TxMtb you also have to set PTT in each group. It is one of the little buttons on top of the group.
-
@Le_Beau Just tried that, didn’t work either unfortunately. Probably something easy missing on my side.
Edit: My bad, was assigning 2 push to talk buttons and it wouldn’t work, assigning 1 only and it works.
-
This post is deleted! -
Hm, that’s weird. I have my PTT config set to pinky / comms forward and it works perfectly.
Cheers, Uwe
-
@hoover While trying to narrow it down tried just keyboard with the M key, it worked, set up M key and throttle, (Warthog), mic sw up, neither worked then.
Tried just mic sw up, and it worked, added M key with it and again neither worked.
Goal was to have mic sw up and down to activate ptt. But neither work when both are there. -
-
@hoover Usually run TARGET on throttle only but have also tried without it running.
Did figure out that when 2 PTT’s are entered, if you press them both at same time, it works. But either or does not. Maybe it’s just how the coding is. Really like the simplicity of the program and it works very well.Tried using 1 button on throttle and 1 on joystick as you said and still same thing happens. But if I press both at same time it works.