jc1-DX128 Profile

[jc1]

Current Version 4.36.03 - July 8, 2022

You can get my files from: https://www.dropbox.com/sh/qv9wc3rlnf3k44b/AADreU6j16_hpqDOYTlbuL_Ca?dl=0

jc1-DX128.key
jc1-DX128.tmc
targetdx128.tmh
jc1-DX128-Joystick.pdf
jc1-DX128-Throttle.pdf
jc1-DX128-Key Codes.pdf
jc1-DX128-Key Labels.pdf

1. Put jc1-DX128.key in the ?:\Falcon BMS 4.36\User\Config directory.
2. Put jc1-DX128.tmc and targetdx128.tmh in the ?:\Program Files (86)\Thrustmaster\TARGET\scripts directory.
3. The pdf files are FYI.
4. TrackIR: Start Thrustmaster TARGET, TrackIR, and BMS Falcon. In the Profiles/HotKeys section of TrackIR,
select Center from Action dropbox, press the Key button, and on the throttle Coolie button press up.
Then press the Action dropbox and select Pause, press the Key button, and on the throttle Coolie button
press down.
5. In the ?:\Falcon BMS 4.36\User\Config\falcon bms.cfg you should set g_bUseAnalogIdleCutoff 1 or check the Idle Cutoff box in the Hardware section selected from the BMS Launcher screen Configuration option.
6. In the ?:\Falcon BMS 4.36\User\Config\falcon bms.cfg you should set g_nButtonsPerDevice 128
7. If you don’t like my key assignments it’s easy to change them to your way.
a) Simply find the callback in the jc1-DX128.key file above the section labeled “Stick and Throttle DX keys”.
b) Make sure the callback doesn’t have 0XFFFFFFFF within the line.
c) Find the BMS DX number below the “Stick and Throttle DX keys” section where you want to replace a callback.
d) Make sure you’re not duplicating an existing callback, unless that’s what you want.
e) Copy and replace the callback in the section below the section “Stick and Throttle DX keys” at the BMS DX number you want to replace.

[jc1]

Version 4.36.01 June 15, 2022

The main reasons for this update are to provide the ability to: 1) Light up the throttle backlight and LEDs for AVTR acmi and 2) give the option to use 3rd party video recorder simultaneously with AVTR acmi. If a 3rd party video recorder is used the hotkey to start and stop the video should be F9 in the 3rd party video setup.

AVTR will be cycled with Coolie Switch Left (CSL). AVTR: RECORD will be cycled first and LED1 will light up. TG2 or S2(Pickle) will produce 30 second acmi but no video. Next AVTR: MARK EVENT will be cycled and all 5 LEDs will light up. This will produce a continuous acmi and simultaneously a 3rd party screen video. If 3rd party video is not being used then only acmi will be recorded. Here is a video of a PopUp attack with acmi. https://youtu.be/LgT5CqG46wU

The following files have changed:
jc1-DX128.tmc
jc1-DX128.key
TargetDX128.tmh
jc1-DX128-Joystick.pdf
jc1-DX128-Throttle.pdf

All my files are available via first post of this thread.

Edit: 06/16/2022 Jammer was removed from Shift CSL.

[jc1]

Version 4.36.02 July 1, 2022

The reason for this update is that the zoom control for TGP on the China Hat (CHF, CHB) was not working. It has been fixed.

The following files have changed:
jc1-DX128.tmc
jc1-DX128.key

All my files are available via first post of this thread.

[jc1]

Version 4.36.03 - July 8, 2022

The reason for this update is to put rotating views on the joystick, Shift POV switch.

The following files have changed:
jc1-DX128.tmc
jc1-DX128.key
jc1-DX128-Joystick.pdf
jc1-DX128-Throttle.pdf

All my files are available via first post of this thread.