Axis Assign and X52 throttle rotary switches
-
Greetings! It’s been a while!
I have finished installing and configuring BMS 4.36 (a huge shout-out to the entire BMS team for making it happen) and the only thing keeping me from getting back in the cockpit and firing up a campaign is… I can’t make my rotaries work like they’re supposed to
I’m currently using chihirobelmo’s outstanding Alternative Launcher, which has pretty much killed every remaining issue with my X52 HOTAS (awesome!). However, I am still unable to use my throttle rotaries to properly control antenna elevation and the range knob like I used to.
I can assign them both as axes without a hitch. However, their full range of motion is not recognised. Consequently, antenna elevation can only be set in-game to fully tilted up, fully tilted down or centred. The range knob won’t even acknowledge the detent and will only go from fully clockwise to fully counterclockwise and vice versa (no value in between).
At first, I thought it could be a problem related to the Launcher, but it turns out I can’t get any other result even with the sim’s default config menu.
Both rotaries work fine through their entire ranges of motion when tested, though. So I know the problem is not hardware-related.
Any ideas?
Many thanks in advance!
-
Hello,
So, it took me the entire day to troubleshoot this and find a solution on my own. Posting the procedure for future reference:
- Download latest drivers;
- Unplug hardware (HOTAS & rudder pedals);
- Uninstall all related software (drivers & SST);
- Delete all related folders (@ Program Files, Temp);
- Delete all related registry entries @ HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput (labelled “SAITEK” and those beginning with “VID_06A3”);
- Reboot;
- Reinstall software (make sure not to plug any hardware until the installer prompts you to!).
Now, both rotaries work as expected
-
I also have the same problem, the X52 pro Rotach Y (Range Knob) does nothing in the cockpit, I also tried to remove the relevant drivers and software, reinstall it and plug it into the USB port when prompted to insert the hardware, but the problem still persists Can’t solve it, I don’t know if there is any other way to solve it
-
Another realization of mine is that the Range Knob is actually used to adjust the zoom level of the TGP - and the gain level of the A-G radar instead of choosing HSD I will be able to increase the range (8-20-30…), or the FCR radar (10-20 -40…) as well