DeeJay's Voice Activaded Commands (VAC) Profiles
-
+1 for Voice Attack.
-
I use F8 to Arm VAC as F8 is not used by anything in the 4.33 Full/Dunc_DX keyfile. The advantage of Arm is that you only have to press it to Arm VAC and then you can release it; you don’t have to hold the key down while you speak. Other than that it looks like you should be good to go.
-
Many thanks for your response Darkman, really appreciate it. So, if I re-map my UHF Up to be F8 in 4.33 and assign F8 in VAC as per your screenshots I should be good to go?
I’ve been using Voice Attack the past couple of days and find it very easy to use along with Crazy Canuck’s profile of which I’ve had to adjust in a couple of places but really simple and intuitive. With your advice I now have two solid options so i’ll see which performs\runs the best.
Many thanks
Dave
-
They’ll probably work the same, as most voice activated software uses built-in Windows Speech Recognition nowadays.
I’m not sure about the TUSBA, as I used Foxy to map F8 to my shifted layer radio button on the TQS, but F8 with the default Full (or Dunc’s) keyfile and F8 in VAC set to Arm (instead of default) should do the job just fine.
-
It works ,but I still can see/hear the command is repeated in game which I said by VAC ,
for example ,I said “Tower request taxi” ,it should just hear tower’s response to grant my request ,
but it will present the exact radio command echo to what I said by VAC AT 1ST and then tower’s response to grant to taxi ,
is it normal?
or how could I mask the “in game radio command” which I issued by VAC ?Thanks in advanced.
-
BMS Manual (in your \Falcon BMS 4.33\Docs\Falcon BMS Manuals folder) page 29: SOUND page
Player Voice
If activated (default) you will hear the pilot’s voice when selecting an option in the comms menu while in 3D. It can be deactivated if you prefer (when using Voice Activated Commands for instance). -
As Darkman says or more directly
-
Really appreciated Darkman and ddoc
-
Is there a way to keep the AI and AWACS radio chatter from causing VAC commands? Sometimes when I have VAC active AI comes on the radio and my view changes. It can be pretty annoying. Also, I am using a single mode with SST X52 and DX shifted. I can’t seem to map the VAC arm to a button without it ruining the buttons shifted command. Anyone know about this or how to fix it?
-
It looks like I am not going to buy VAC after the trial period is up. I turn it off and can’t map it to a HOTAS button anyway. I don’t see a point in paying for it if I have to have a keyboard button to turn it on and off. If I leave it on the AI and AWACS initiates VAC commands, especially changes views. If I could map it to a HOTAS button I would reconsider. Maybe I can leave it on and delete only the VAC commands that I really need, then use wording that the AI or AWACS don’t use.
-
No idea about Saitek but it works fine mapping it to a HOTAS button with the Cougar. See my post above:https://www.benchmarksims.org/forum/showthread.php?8323-DeeJay-s-Voice-Activaded-Commands-(VAC)-Profiles&p=112029&viewfull=1#post112029
-
Did you map it to a DX button or to a HOTAS software button? I already have my COMMs HAT to control COMMs unshifted and to cycle radar submodes shifted, all through DX. I tried to map VAC to the same button as UHF so it would do UHF and VAC but when I map VAC through SST to the UHF HAT it breaks the UHF callback as well as all the other ones on the HAT. I have read that you cannot map VAC with DX. So, it looks like I am forced to either use an unshifted button for VAC which will then ruin the ability to use that button shifted for something else or use the keyboard and adjust the commands so the AI and AWACS don’t initiate commands.
I am not using SST software shifting. I am using DX shifting. So how do I assign VAC to a shifted button when it doesn’t see DX commands?
-
Looks like the links to download are down again and the one included in the game directory when converted to vap give me an error upon import. Anyone have a fix or a copy of darkmans profile to share or repost? Do these work for voice attack or only the other program as that may be my problem? Thanks.
-
Never mind i just altered one that was on line to my liking. Thanks anyway though.
-
Hello Darkman,
The link does not seem to work. Any ideas?
Pika -
The link (from 2012) was for BMS 4.32; VAC profiles for BMS 4.33 are included in your installation.
Go to your \Falcon BMS 4.33 U1\Docs\Key Files & Input\Device Setup Guides & Profiles\Voice Activated Commands folder
-
Awesome Darkman!
You guys are the best!
Pika -
Having trouble activating VAC (Using Deejays QWERTY Profile) - its a VAC issue not BMS as I can’t get it to output any keystrokes to Notepad…
I’ve set up an ARM PTT Key which works in test (Illuminates in Test pressed) AND it seems to recognise the appropriate voice phrases…(mostly)
BUT it WON’T activate any keypresses…
In test mode I get…“phrase recognised but arm was not set” and if I run the program I get no output to Notepad…
It obviously recognises I’ve pressed the PTT key or it wouldn’t illuminate the button in the test screen…or know to listen and recognise the spoken phrase…so why can’t I get it to generate an output?
Cheers for the help! -
-
Please is there anyway I can purchase VAC, their site is down… Thank you
-
@Sniper-0 said in DeeJay's Voice Activaded Commands (VAC) Profiles:
Please is there anyway I can purchase VAC, their site is down… Thank you
VAC is dead bread.
May I suggest FoxVox : https://forum.falcon-bms.com/topic/21078/foxvox-free-voice-control-software-for-bms