Stick Sensitivity
-
it seems like 52 is nonlinear,and u can modify it to linear:
http://www.berkuts.ru/forum/showthread.php?t=142 -
For Logitech users of less complex sticks like the 3D Pro or Ex Digital 3D, I might be having a clue how to increase stick sensitivity. Today I tested an ancient yet effective profiler (in Win Xp 32 Bit) which is working qzite ok and gives more power.
Aka faster rolls and turns.
I will post it if it works in a couple of weeks, incl. link.
You can increase saturation (or decrease) from 50% default to 100%, which seems to work on top of the BMS setting when activated.That’s one of my axis e.g.
I so wish the software does not bust my stick…
-
PS Sorry for eventual typos, so tired. To sum it up, seems to work, only needs to stand the tests.
Good thing is I can leave my other sims unprogrammed, which I intended.Cheerio
-
This post is deleted! -
Are the magnet and stiffness mod easy?
-
@dthom:
Are the magnet and stiffness mod easy?
If you talk of this
it seems like 52 is nonlinear,and u can modify it to linear:
http://www.berkuts.ru/forum/showthread.php?t=142For my Saitek X52 Pro - I haven’t done either but I found the Hall sensor brackets slightly loose in mine which would have given a non-linear response (the screws just needed a quater turn to make them tight).
So at a guess
For the Magent mod - I would say that tighteing everything up fixed the non-linear and adding the screws reduced the sensitivity which may/may not be good?
For the Stiffness mod - adding temp. spacers under the stick spring should remove some/all of the center point floppiness and looks easy to do but I’ve just adusted to the floppiness.
-
You might want to make sure you have an up to date driver. Also, you haven’t given an system specs and beleve me, I have been working at gettimg my system back after being in the dust for 5 years. It takes some time to get everything just right. Try running it on lower resolutions and working your way up until you get the response you want. I was over controlling too and it just requires trial and error. Keep working with it and post you system specs by typing “dxdiag” in your run window and look at your video drivers. Post what you got and we will try to grt you controllable.
-
so you suggest it has something to do with the individual pc?
-
Think in my case with too harsh responsiveness aka too big delay it is just the stick and the software. Tested all sorts of seetup settings. Seen videos of my online mates and they can do stuff I never could do.
Tom
-
I’ve been using my X52 Pro with BMS for about a year now. And yes, the sensitivity is highly annoying! Especially while re-fueling! Maybe if my joystick was as well-made as the F16’s it wouldn’t be a problem, but it’s not. The small amount of mechanical play wreaks havoc on the pitch when combined with the sensitive flight model of the F16.
But finally… FINALLY I found the solution. So simple: I’ve been using the Saitek Profile Editor v6.6.6.9 to program the buttons (the 7.x.x.x version crashes too much) and stumbled on the Y-axis sensitivity adjustment.
Open Profile Editor.
Load your favorite profile.
Scroll down to the Y-Axis.
It should say “Y-Axis = Directional Axis” and if it doesn’t, select it using the small “right-arrow” that appears when you float the mouse over the upper right corner of the Y-Axis box.
Click in the Y-Axis box and a “Sensitivity” adjustment pops up.
I scrolled the adjustment to the left from 50% down to about 35%.
Makes the world of difference!Good luck!
-
hmm. old thread.
anyways, I just tried removing the BMS set “small” deadzone. didnt even notice it before.
I didnt really notice a difference in the minute long test flight afterwards, but I also didnt tank yet. will try that and see if there is a difference.
-
you have done 6 updates and not caring to change the curve for us non-resistive joystick users. you know,it’s too sensitive in motion joysticks you need to change it. aiming a bomb and landing is too difficult, i end up using 10% of joystick motion to aim. plus you haven’t modelled the flight computer right because when i pitch up more than like 10 degrees it starts pitching up by itself and i need down input to keep straight. revise
-
You should read the FLCS article before.
-
plus you haven’t modelled the flight computer right because when i pitch up more than like 10 degrees it starts pitching up by itself and i need down input to keep straight. revise
like the real one……
i give you a tip
FM_developper_note_4
page 20when in pitch up situation like the third graph
An = G cos(pitchangle)…for 45 deg pitch up, An = 0.7G
under 11deg AOA (which means the FLCS is in G command mode) the FLCS ALWAYS commands 1G when stick neutral, therefore the AC is pitching up by itself to keep 1G, if you want to fly straight at 45 deg pitch up, you need to fly at 0.7G whiich means you need to push a little on the stick
this behavior is well illustred in some F16 aerobatics articles…
revise plz
-
fair.i thought computer was supposed to keep flight path.
but you didn’t care about the other section of my message.do you want to help or not? -
fair.i thought computer was supposed to keep flight path.
That is why reading article first is a good idea.
-
fair.i thought computer was supposed to keep flight path.
but you didn’t care about the other section of my message.do you want to help or not?To be entirely fair, the current curve for BMS replicates the response curve for the F-16 - not that you knew that I guess, its hidden away in a classified article, in the download section. If you wanr to use more of the throw on the joystick, it will always come at either the expense of fine adjustability in part of the range, or a more limited range.
For most flying, you only need to make small inputs. If you want to use the whole area of your joystick, come back after flying HARTS maneuvers. Even with the current curve you dislike, you will end up pulling that stick to the stops…
-
So to make a long story short the real response curve is build in the system that is why i recommand the user to use a strict linear response in their set up. Trying to deviate from it Will provoke PIO in some flight régions .
Right on!
This is not Lockon or IL-2 where the FM (if one can call it so) was manipulative “constructed” or “compensated” with joystick curves.
Your controller input is always linear (1 - 100%) … the rest is up to the FLCS and the physics-modeling of the plane - or the transition mechanics in older planes.Lets not forget: Joystick curves have been invented to counter old dirty potis and poti-spiking and this feature is STILL inherited and misused with wrong purposes.
Many ppl have tried to change their curves to get a better “feel” or because with linear response some sims are just way to off in the handling of the craft, thus ppl are “forced” to
compensate, but joystic-curves HAVE NOTHING to do with the actuall FM. NO relation AT ALL - even if perceived often otherwise. Curves are an “excuse” for failing FM or as buffer for failing hardware (sensors), that´s it.In my personal opinion the use of joystick curves is and was inspired in many sims due to failing modeling of the “cause” of forces.
Most sims simulate the “effect” or “result” if you will (if this and that happens, do this and that as result), but not the actual “cause” of forces, like BMS does.A proper made sim has not to compensate ones feelings or habbits with curves - one has to feel and learn the FM or the nature of the plane instead.
Imagine yourself sitting in ANY real combat aircraft (old or new) …and saying: " i dont like how it feels, where can i change the curves? " Really?
A plane is not a ego-shooter barrel or a photoshop pencil which draws better with less sensitivtiy values, but a physical object which behaviour is commanded by the environmental physical forces only - and if excisting - the flight computer.Furthermore - my opinion if that counts:
Being involved in simulations for over 8 years and being interested in flight-physics aswell, and having flown almost everything what ever was simulated on PC out there… in my humble opinion
Mav-Jp created a flight-model available on a PC with BMS, which is in a quality NO other sim ever has accomplished, not x-plane, not fsx, not il-2 not FC …none of them comes even close.
I could talk hours how miserable made FMs in other sims have been deliberatly exploited to gain unrealistic advantages…but thats another story …long story short… get a proper stick and dont blame the sim
-
That is why reading article first is a good idea.
shh DJ, if people read the articles first youll put yourself out of a job!
your job is to correct silly RTFM mistakes constantly, right? I just assumed cause it seems like its a pretty common occurrence…
-
… I would like to go on holiday.