BMS 4.32 SoftTH
-
Anyone ? ? ? ?
I guess not oh well……
-
Is it beneficial or workable to use the SoftTH with one card with three (non-surround / non-eyefinity) outputs?
I have some GTX475 which has two DVIs and one DisplayPort, and which doesn’t allow Surround Gaming in itself. But I would have the three displays… -
From what I’ve understood yes, it will use another video card in your system to display the remaining output.
It mirrors what would be the 3rd output internally over the PCI-E bus and displays it through the 2nd video card.
Nvidia hardware is limited to 2 simultaneous displays per card, even though there is technically 3 outputs. So with a second card installed in your system you will now have 3 outputs possible. The second card does not have to perform any 3D rendering, so requirements are low. All video cards must be PCI-E, not compatible with AGP or PCI due to bandwidth limitations.
-
This post is deleted! -
anyone else got the really slow ui screen issue? i can fix it but in config but then lose freetrack and debrief clickable is fubar?
Hello. Can I ask you if you solved this issue? How did you fix it using the config tool?
-
I have 3 monitors on 1 card, it’s an AMD/ATi, but I could get it working with many nVidia cards as well. For my generation I needed an active HDCP-DVI adapter to generate the 3rd timing signal but more modern cards generate at least 3 timing signals natively.
I have a working 3-screen SoftTH setup with BMS that I’m quite pleased with.
-
Just for guys searching for it:
@The_Nephilim:you will need to edit the “Falcon BMS.cfg” in 2 spots for Field of View:
1. g_fDefaultFOV to whatever works for you I have it set too 110…
2. g_fMaximumFOV = whatever you would want the max FOV go out to… I set mine to 110 again here…other than that as long as you setup Surround mode for whichever card you have it should just work as long as you are using a triplescreen resolution… I think this is the info you needed as it was a bit vague on what you need info wise…