This was what I was dreaming of when I first saw Bogey Dope’s video. Thanks for your efforts!
Fearripper96
@Fearripper96
Engineer from Sweden, 72nd VFW member.
Best posts made by Fearripper96
-
RE: Virtual Crew Chief for BMS
-
RE: F4Wx – Real Weather Converter
Will this work with the changes to 4.36 .fmap files or should we wait for an update to the applet?
-
AI UHF Volume (U3)
Flying in MP, the three players participating yesterday all had an issue with AI voice messages being “locked” to low volume.
All the voice messages from AWACS could be heard at desired volume if the COMM 1 volume knob was manipulated, but reverted to low volume after a few seconds. I tried resetting the comm systems in the video below with no effect. ATC volume was not affected.
Are AI communications supposed to be attenuated at distance? In that case, this might have been the case here as the AWACS callsign responding (Chalice) was nowhere near us at the time (didn’t show up on the ACMI at all).
-
RE: IVC DSP Based on Server Position Rather than Client
This seems to be the same thing that we discovered when testing for the same issue with F4RADAR operators being masked/attenuated. Switching the names fixes it (and that’s also mentioned in the F4RADAR instructions).
-
RE: FLIR Boresighting & very dark night
@awmk1 This is realistic, no? On a night with very low ambient lighting FLIR should be better due to using different images to intensify.
-
RE: AI UHF Volume (U3)
@dram Thanks for testing. I’ll keep an eye out for the AWACS distance next time I encounter this as well.
-
Unknown, consistent freeze [U3]
Hello once again,
I have a freeze that occurs in campaign, regardless of SP or MP, very consistently. I have no idea what’s causing it. To reproduce, download mission files (Drive link below) and commit to any F-16 flight from Kunsan AB 47th Sq. Dump file is also included from the freeze in the drive folder.
-
RE: Unknown, consistent freeze [U3]
@seifer many thanks to you.
-
RE: HMCS Fine alignment
Ensure you are looking straight ahead at the HUD. The HMCS will blank and only HUD will show symbology, then adjust with cursor.
Latest posts made by Fearripper96
-
RE: DED Alignment questions
@jcook the only thing that will mess up an alignment is moving the aircraft - you can do everything else. Go to the menu with LIST-6. As for what the numbers mean, the easy explanation is that the left number counts minutes and the right the quality. 4 min for newer blocks if complete and 8 min for older.
-
RE: Virtual Crew Chief for BMS
This was what I was dreaming of when I first saw Bogey Dope’s video. Thanks for your efforts!
-
RE: Tips to engage SA-10's with HARM's?
@cchaparro you need to download Tacview (there is a free version here https://www.tacview.net/) to use .acmi files.
-
FORM knob not syncing in MP
Hey all,
Just wondering if anyone can confirm my experience with the external lighting in MP - when using the BRT/DIM switch for wingtip lights all is fine; setting these to OFF and using the FORM knob to control the brightness on the wingtip lights isn’t synced to other aircraft. They appear off to everyone else, regardless of what you see locally.
Is this intentional to save data traffic, or a bug, or simply not implemented?
-
RE: 4.37 CTD when entering 3D VR
@Staniol also make sure you have no VR overlay apps running when you test. I noticed that OVR Toolkit overlays make BMS crash, but certain others work (can’t say for sure which).
-
RE: IVC DSP Based on Server Position Rather than Client
This seems to be the same thing that we discovered when testing for the same issue with F4RADAR operators being masked/attenuated. Switching the names fixes it (and that’s also mentioned in the F4RADAR instructions).
-
RE: Idle cut off
@Gancio I had this issue and found the configurator pointing to 4.36 instead of 4.37, check the version in the configurator and make sure you’re changing the correct version.
-
[4.37] E-Jett drops CATM pylons
Hi, thanks for the hard work with the update.
Reporting a possible bug - using the emergency jettison drops all CATM weapons from their pylons. The AN/ASQ-T50 stays on.
-
RE: Launch without any setup override and VR switch
@chinpok someitmes simappro needs to be started to make the device “work”. I would recommend following chihiro’s advice and using the throttle as 1 device with 128 buttons though, it makes it much easier to bind.
-
RE: [4.36.1] R77 fired by AI goes dumb off the rail
@DUSTOFF17 yeah, me neither, I have not seen it since reporting. It was probably a coincidence of multiple things.