Thanks a lot for this update and all the effort the team is doing to maintain BMS Alive, is not easy.
Best posts made by fvelazdem
-
RE: Quick update from the BMS Frontlines - November 2021
-
AIM 120
Hi everyone, Just to be aware if something was changed related to AIM-120.
Today I fired 4x120 to MIG21 at 15 miles and none of them reached the MiG21. I kept blocked the boggies and wait until pitbull.Under my view this is not possible, I thing made nothing wrong.
-
RE: Falcon BMS 4.36 TRAILER 4K
@B3rNO
First, thanks a lot for the extraordinary Job made by the BMS Team. The video is incredible!!! and I am counting the days to start flight in this impresive f16 simulator: BMS 4.36!!!
Again Thanks a lot because we will have hours of enjoy and fun -
RE: WIP sounds mod
<p>@sheref Sorry, Just one more question not to make a mistake. To install, I just have to copy the files in each folder I have with the different Scenarios?</p>
-
AWACS volume drops
<p>During a flight when I ask the AWACS for the picture suddenly the sound volume is lowered and it is impossible to hear what it says. I press the COM1 wheel and it sounds fine but the volume goes down again a few seconds later. Does anyone know why this happens and if there is a solution?</p>
-
RE: Falcon BMS 4.37 VR READY "and Beyond" Trailer 4K
Congratulations on the video, the production is magnificent. The BMS development team is priceless, they do an incredible job with excellent quality and also on a non-profit basis, just offer BMS enthusiasts a product with extreme quality.
thanks
-
Migrate TACS from previous versions
Is available any tool to migrate Tacs from previous BMS versions to the current one?
Latest posts made by fvelazdem
-
RE: Falcon BMS user.cfg
Thanks a lot.
Well now in my isntallation everything works. This issue created a lot of doubts on the new file: Falcon BMS User.cfg so I will not use it.
I have log file where I have all the modifications I do on Falcon BMS.cfg so is a matter of updating it each time I make a modification, is not a big job.
-
Falcon BMS user.cfg
The last 30 days I’ve been trying to make the Morphine profile that Gastone has designed for 4.37.
There was no way, despite the fact that I have reviewed the installation a thousand times, the profile did not work in 4.37, even Gastone no longer knew what to tell me.One step of the installation consisted of including in Falcon BMS User.cfg a line for a certain key (In the warthog, the paddle).
Today I deleted that line from Falcon BMS User.cfg and copied it directly into Falcon BMS.cfg and the profile has finally worked correctly.
Falcon BMS user.cfg has not worked according to page 12 of the Thecnical Manual.
Question: Does this file simply rewrite a certain line with the new values?
If this line does not exist in Falcon BMS.cfg and we only put it in Falcon BMS User.cfg, does the system understand that it must be used or, since it does not exist in Falcon BMS.cfg, does it ignore it?
Thanks in advance
-
RE: Morphine's Profile For 4.37
Thanks Gastone,
What you have explained makes sense and that is why I have thought again, I have reviewed the entire installation and apparently everything is correct.
I have “set g_nHotasPinkyShiftMagnitude 512” in Falcon BMS User.cfg and I thought that maybe this is causing problems, it shouldn’t, but just in case I tried the following:
I have deleted “set g_nHotasPinkyShiftMagnitude 512” from Falcon BMS User.cfg
I have added this line directly in Falcon BMS.cfg.I have tried and it has worked!!!
I don’t understand why the setting in falcon BMS user.cfg did not override the ones in Facon BMS.cfg . That should be an issue. I will post it at the thecnical support to let see.
I want to thank you for your patience all this time.
-
RE: Morphine's Profile For 4.37
Thanks Gastone.
I didn’t want to bother you, when I said it didn’t work I was obviously referring to my installation. If it has bothered you, I apologize.I have done the installation again from the new files from the link that you have put and I have made sure that everything is fine. I have tested it again and when I press Paddle everything goes wrong, every time I press something on the joystick it does something wrong.
I don’t think you understood what I said. I use the version: WarthogBMS_Full_5_434_Paddle.tmc
with the file: Morphine_BMS_435_full.Key
both from previous versions and everything works correctly in the current BMS: BMS4.37.Anyway, thank you but I am not going to try again to make the new version that you have created work and I will continue with the one that I have managed to make work.
Regarding the reasons that you state why it does not work in my installation, allow me to answer you:
1.- No, I have not edited that file.
2.- That line is in the Falcon BMS User.cfg
3.- I have never said at any time that I have used files from Version 4.37 in previous versions.The proof is that I have done the installation again and everything remains the same.
It can be concluded that the problem is mine since there have been many people who have tried it and it works. I ask you, please, do not attribute it to the fact that I have done the installation wrong or that I have overcopied files, because it is simply not true. I repeat it again, there is something that conflicts when I press Paddle and the configuration stops working on my computer
Thanks and I hope in the future if you launch a new version I will be able to use it.
-
RE: Morphine's Profile For 4.37
Gastone,
I compared the two files line by line:
Morphine BMS 437 Paddle Swap.tmc
Warthog_Full_5_434_Paddle.tmcAnd I did not found differences.
Based on that, I load through Target: Morphine BMS 437 Paddle Swap.tmc and In BMS: Morphine_BMS_435_Full.Key (mine).I test it and everything Ok, paddle, etc.
The only conclusion I can get is that BMS 437 Morphine Full.key has a conflict with both *.tms and this is the reason why the new profile do not work proppely.
-
RE: Morphine's Profile For 4.37
Already Installed last version of TARGET. I test:
1.- Devicesorting you Provided
2.- Load Throught new version of target :Morphine BMS 437 Paddle Swap.tmc
3.- Load in BMS: BMS 437 MORPHINE FULL.As soon I press and mantain paddle nothing work properly.
Then, I test:
1.- My previous Devicesorting
2.- Load Throught new version of target :WarthogBMS_Full_5_434_Paddle.tmc
3.- Load in BMS: Morphine_BMS_435_full.Keyeverything works correct. This is a mysteri
-
RE: Morphine's Profile For 4.37
Thanks Gastone,
I will try to update Target and test again
What I am doing is use the 4.35 profile for BMS 4.37 with the version of target that I mentioned before, everything works ok.
-
RE: Morphine's Profile For 4.37
Sorry forthe delay, I was out. Here you have what you requested:
In addition to all of this, the target version I am using is: V.3.0.20.826
Last point: I am using the following TMC file and key file:
Warthog_BMS_Full_5_434_Paddle.tmc
Morphine_BMS_435_full.Keywith this everything works. I am not using f6 MFD 1 or 2.
-
RE: Morphine's Profile For 4.37
Gastone
As promised I test and sorry for tha bad news, but still not working. Now, when I press Paddle nothing start to be mad like in the past, but nothing happen. I mean, the waypont do not increase for example.
In the same way, CMS or TMS do not work. I tried to launch flares and nothing happened or to activate the ECM. TMS in the same way.
Obviusly I downloaded from your last link.
-
RE: Morphine's Profile For 4.37
@Gastone Thanks to you for provide us with this profile, at least for me is a big help.
You deserve a bier!!! I will test tomorrow and let you know., today is a it complicate