@Nickos86 No chance to be the airsource switch? It could be an overheat maybe. Maybe check the fault log.
Posts made by Amraam
-
RE: JHMCS dissappear mid-flight /on the ground
-
RE: SOUNDS
Indeed, you should check that your sound setup are for “headset”, not 5.1, 5.2, …
Most of the case it will fixe the problem. -
RE: Just to be sure
@radium I just said “based on the information I have”. No statement behind it.
You should know me a bit more than that ;). -
RE: Just to be sure
Based on the informations I have, Mica should have a lower MAR than the AIM-120B anyway.
-
RE: Falcon 4.0
That’s incorrect and dangerously unhelpful advice.
The BMS Team’s agreement with Tommo requires that Falcon 4.0 is present on a system running BMS code and the code mode definitely checks for that install. Please do not attempt to work around that requirement. It says clearly in the EULA that the Falcon BMS is a community mod for Falcon 4.0 not a standalone game and you agree to that EULA when you install the mod.
Maybe just a miss spelling. I didn’t say that you don’t need to install it (at least this is not what I mean to say. More that BMS install is stand alone by itself.
-
RE: Falcon 4.0
BMS is standalone, no need Falcon 4.0 to work. It just need the install somewhere in the register to install BMS.
-
RE: [BUG] 4.35 MP Spawnpoints
This bug already append in 4.34, and even in the past (I remember it during SuperPack days :p).
What was the MP settings for everyone? -
RE: MLU Documentation/Tutorials
MLU’s are pretty good in BMS. At my squad we only fly Belgian MLU’s.
What are your questions? And about what MLU version? -
RE: High Altitude LGB GBU-24 /B /HE 4.34U3 Results
For PIV, you should lase mostly all the way long. I personnally manually lase after the drop (for a nominal drop, if you drop on climbing, it will not be the same things).
-
RE: Fuel warning on Hud
WARN Reset switch on the UFC, same switch than the DRIFT / CO in down position.
-
RE: 4.34 U1 cockpits
It will not change anything to your MFD’s as lettering is not tight to the 3D model.
-
RE: [4.34.1] [MFD] FCR rotating and colour settings
Can you just confirm this is also how your colour scheme is set?
Some changes that we’ve already noticed, compared to 4.34:
FCR:- Own lock is blue (used to be yellow)
- Cursor value <0ft is white (not shown, used to be red)
- Strobes are blue chevrons (used to be yellow)
IDM:
- IDM wingman lock is blue (used to be yellow)
- Both left and right colum entries are shown as green (used to be blue and green)
We also have someone with direct access to all current and old documentation, and he’s absolutely convinced the current colour setting is not correct. This excerpt of the M3 manual also seems to confirm that, but just to be sure, he would check ASAP.
Yes I confirm. That information is not coming from a documatation but from a real DTC file that we use here ;).
-
RE: [4.34.1] [MFD] FCR rotating and colour settings
About the color code for the MFD’s of the AM-B, I made that changes based on documentation I have about the default DTC color loaded in our country ;).
-
RE: Seat down/up..
I need the sound and then I will be able to touch it
-
RE: Seat down/up..
I should be able to clean the sound for you if needed. But indeed Deejay, I remember the real seat motor have a higher pitched sound.
-
RE: Switching on UHF radio implemented incorrectly
Only receive on Guard for both, you will not transmit
-
RE: ILS info: KTO charts
No, in that case you should divert. Same logic will apply when the crosswind is too strong.