Or at least a checklist
Latest posts made by Artur
-
RE: OBS buttons bound to Warthog by default
Tried and didnt help at all⌠God setting up controls in BMS i terrible. Im fighting with this over a week ;/
-
RE: OBS buttons bound to Warthog by default
I had the same issue when I started programming the OSB, It over wrote the stick/throttle.
Donât enable the OSBs in Target. I believe that was my solution.
Good luck not using Target
How to do that ?
-
RE: Mud's Profile
After closer analysis I dont think âUSB HID device⌠ble ble bleâ ale problem.
First two cannot be found 'cos I dont have MFDs thatâs obviously. Second part I mean â0400â and âB10Aâ have nothing to do 'cos your script work at yours TARGET/BMS thing. Something else causes the issue. hmmm⌠brain storm. -
RE: Mud's Profile
@Mud:
Hey Artur,
Yeah, I canât quite see anything youâd be doing wrong to be honest.
Just make sure those 2 files are not set to read only then. Especially not before you have set all your axis settings.
In BMS, where you select your controller, do you see and select Thrustmaster Combined?Believe me Ive tried so many options In controller selection I see Thrustmaster Combined and its selected.
Got some clue:
Running script: C:\Users\Artur\Documents\T.A.R.G.E.T Profile\BMS 4.33 - Mud.tmc
*** Allocated ProcInstances found from the previous run: use FreeProcInstance() ***
Mapped plugin module âC:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dllâ
Compile Succeeded.
Physical USB HID devices managed by script!
Currently plugged USB HID devices[2]:
1: âJoystick - HOTAS Warthogâ - âUSB\VID_044F&PID_0402&REV_0100â
2: âThrottle - HOTAS Warthogâ - âUSB\VID_044F&PID_0404&REV_0100â
USB HID device âThrottle - HOTAS Warthogâ(USB\VID_044F&PID_0404\7&34F39FBF&0&4) selected
USB HID device âJoystick - HOTAS Warthogâ(USB\VID_044F&PID_0402\7&34F39FBF&0&1) selected
USB HID device with hardware id âVID_044F&PID_b351â cannot be found <â--------- !!
USB HID device with hardware id âVID_044F&PID_b352â cannot be found <â--------- !!
USB HID device with hardware id âVID_044F&PID_0400â cannot be found <â--------- !!
USB HID device with hardware id âVID_044F&PID_B10Aâ cannot be found <â--------- !!
Virtual HID devices managed by script!
Connecting virtual joystickâŚDone
Device name set to Thrustmaster Combined
Connecting virtual keyboardâŚDone
Connecting virtual mouseâŚDonemain returned 0
-
RE: Mud's Profile
@Mud:
3. You can skip this step and leave those files normal now. Seems it is a Windows problem, not a BMS one.
6. By Profile you mean you loaded the keyfile BMS 4.33 - Mud.key ?
Ive tried with âread onlyâ and without it. Results the same.
By profile I mean loading profile BMS 4.33 - Mud.key
-
RE: Mud's Profile
@Mud:
Artur, could you take me through what you do step by step? Perhaps Iâll spot something then you may be missing.
Yes sure.
1. Of course Im downloading version 3.0
2. BMS 4.33 - Mud.key goes to D:\Falcon BMS 4.33\User\Config
3. Setting up axismapping and joystick.cal to read only
4. Starting TARGET Script and opening BMS 4.33 - Mud.tmcI donât need to type off line ***Launch BMS⌠*** because as you can see its the same as yours but Im typing out MFDs and it looks like this:
//*************************
//*** TM Cougar MFDâs ***
//*************************//ActKey(PULSE+KEYON+LED(&LMFD, LED_INTENSITY, 0)); //set left MFD backlight power to middle
//ActKey(PULSE+KEYON+LED(&RMFD, LED_INTENSITY, 0)); //set right MFD backlight power to middle// Left MFD
//MapKey(&LMFD, OSB01, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x1E],LOCK)); // ** USB 1 **
//MapKey(&LMFD, OSB02, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x1F],LOCK)); // ** USB 2 **
//MapKey(&LMFD, OSB03, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x20],LOCK)); // ** USB 3 **
//MapKey(&LMFD, OSB04, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x21],LOCK)); // ** USB 4 **
//MapKey(&LMFD, OSB05, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x22],LOCK)); // ** USB 5 **
//MapKey(&LMFD, OSB06, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x23],LOCK)); // ** USB 6 **
//MapKey(&LMFD, OSB07, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x24],LOCK)); // ** USB 7 **
//MapKey(&LMFD, OSB08, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x25],LOCK)); // ** USB 8 **
//MapKey(&LMFD, OSB09, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x26],LOCK)); // ** USB 9 **
//MapKey(&LMFD, OSB10, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x27],LOCK)); // ** USB 0 **
//MapKey(&LMFD, OSB11, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP1,LOCK));
//MapKey(&LMFD, OSB12, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP2,LOCK));
//MapKey(&LMFD, OSB13, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP3,LOCK));
//MapKey(&LMFD, OSB14, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP4,LOCK));
//MapKey(&LMFD, OSB15, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP5,LOCK));
//MapKey(&LMFD, OSB16, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP6,LOCK));
//MapKey(&LMFD, OSB17, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP7,LOCK));
//MapKey(&LMFD, OSB18, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP8,LOCK));
//MapKey(&LMFD, OSB19, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP9,LOCK));
//MapKey(&LMFD, OSB20, CHAIN(LOCK+PULSE+L_CTL+L_ALT+KP0,LOCK));
// GAIN = HUD Brightness
//MapKey(&LMFD, GAINU, CHAIN(LOCK+PULSE+L_CTL+L_SHIFT+USB[0x57],LOCK)); // ** USB NUMPAD + **
//MapKey(&LMFD, GAIND, CHAIN(LOCK+PULSE+L_CTL+L_SHIFT+USB[0x56],LOCK)); // ** USB NUMPAD - **
// BRIT = Left MFD Brightness
//MapKey(&LMFD, BRTU, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x2E],LOCK)); // ** USB = **
//MapKey(&LMFD, BRTD, CHAIN(LOCK+PULSE+L_CTL+L_ALT+USB[0x2D],LOCK)); // ** USB - **
// SYM = AA / AG
//MapKey(&LMFD, SYMU, CHAIN(LOCK+PULSE+USB[0x3E],LOCK)); // ** USB F5 **
//MapKey(&LMFD, SYMD, CHAIN(LOCK+PULSE+USB[0x3F],LOCK)); // ** USB F6 **
// CON = Altimeter adjust
//MapKey(&RMFD, CONU, REXEC(7,90,âActKey(PULSE+KEYON+L_SHIFT+L_ALT+USB[0x34]);â)); // ** USB â **
//MapKey(&RMFD, COND, REXEC(8,90,âActKey(PULSE+KEYON+L_SHIFT+L_ALT+USB[0x33]);â)); // ** USB ; **// Right MFD
//MapKey(&RMFD, OSB01, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x1E],LOCK)); // ** USB 1 **
//MapKey(&RMFD, OSB02, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x1F],LOCK)); // ** USB 2 **
//MapKey(&RMFD, OSB03, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x20],LOCK)); // ** USB 3 **
//MapKey(&RMFD, OSB04, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x21],LOCK)); // ** USB 4 **
//MapKey(&RMFD, OSB05, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x22],LOCK)); // ** USB 5 **
//MapKey(&RMFD, OSB06, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x23],LOCK)); // ** USB 6 **
//MapKey(&RMFD, OSB07, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x24],LOCK)); // ** USB 7 **
//MapKey(&RMFD, OSB08, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x25],LOCK)); // ** USB 8 **
//MapKey(&RMFD, OSB09, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x26],LOCK)); // ** USB 9 **
//MapKey(&RMFD, OSB10, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x27],LOCK)); // ** USB 0 **
//MapKey(&RMFD, OSB11, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP1,LOCK));
//MapKey(&RMFD, OSB12, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP2,LOCK));
//MapKey(&RMFD, OSB13, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP3,LOCK));
//MapKey(&RMFD, OSB14, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP4,LOCK));
//MapKey(&RMFD, OSB15, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP5,LOCK));
//MapKey(&RMFD, OSB16, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP6,LOCK));
//MapKey(&RMFD, OSB17, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP7,LOCK));
//MapKey(&RMFD, OSB18, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP8,LOCK));
//MapKey(&RMFD, OSB19, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP9,LOCK));
//MapKey(&RMFD, OSB20, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+KP0,LOCK));
// GAIN = HUD Brightness
//MapKey(&RMFD, GAINU, CHAIN(LOCK+PULSE+L_CTL+L_SHIFT+USB[0x57],LOCK)); // ** USB NUMPAD + **
//MapKey(&RMFD, GAIND, CHAIN(LOCK+PULSE+L_CTL+L_SHIFT+USB[0x56],LOCK)); // ** USB NUMPAD - **
// BRIT = Right MFD Brightness
//MapKey(&RMFD, BRTU, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x2E],LOCK)); // ** USB = **
//MapKey(&RMFD, BRTD, CHAIN(LOCK+PULSE+L_SHIFT+L_ALT+USB[0x2D],LOCK)); // ** USB - **
// SYM = AA / AG
//MapKey(&RMFD, SYMU, CHAIN(LOCK+PULSE+USB[0x3E],LOCK)); // ** USB F5 **
//MapKey(&RMFD, SYMD, CHAIN(LOCK+PULSE+USB[0x3F],LOCK)); // ** USB F6 **
// CON = Altimeter adjust
//MapKey(&RMFD, CONU, REXEC(7,90,âActKey(PULSE+KEYON+L_SHIFT+L_ALT+USB[0x34]);â)); // ** USB â **
//MapKey(&RMFD, COND, REXEC(8,90,âActKey(PULSE+KEYON+L_SHIFT+L_ALT+USB[0x33]);â)); // ** USB ; **So I save changes and launching script.
5. Launcher.exe is starting automatically
6. In game I have my profile (tried with new profiles as well)
Im going to settings loading yours setup and apply it, then setting up axis and you know the restHad issues with the new file all axisâs were bound correctly only joystick button that worked was look closer, Throttle buttons a few didnât work airbrake, china hat, slew, coolie and yes loaded correctly with new keyfile and script
TARGET version 1.0.11.304
Firmware 11/23
BMS 4.33I have TM Warthog, Saitek Pro Rudder Pedals and TrackIR.
-
RE: Mud's Profile
Had issues with the new file all axisâs were bound correctly only joystick button that worked was look closer, Throttle buttons a few didnât work airbrake, china hat, slew, coolie and yes loaded correctly with new keyfile and script
And I have exactly the same thing.
@Mud:
And you load and run the script from the script editor and not the GUI from Target?
Apart from that I donât know what to say. If itâs working for me, it should for everybody else as well.
If you donât have an idea to solve this problem then maybe someone else have. Anybody ?? Plz help is needed !