Made my own map in the AL. Everything works perfectly including the pinky shift. So glad I can fly around now. Just need to learn a lot about the weapons systems (Dash-34) Appreciate all of your work chihirobelmo!!
Latest posts made by CarswellAFB
-
RE: Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments)
-
RE: Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments)
I’ll look into it tonight. Thanks for your response!
I was thinking I had to change the BMS KEY FILE based on my AL mapping since I was using Cashman’s key file for X56. But after I set my own mapping in the AL I just need to load BMS FULL correct?
CAFB
-
RE: Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments)
I’m still new to the SIM and had a question regarding the KeyMapping in the AL. Right now I’m using a profile by Cashman which I downloaded into the config file. I’m using a X56 Rhino. It works ok (have problems with pinky shift/DX) but I would like to create my own mapping. Can I just do this in the AL? If I use the AL mapping section will it become the default map? What do I load into the UI. Do I just leave the Cashman profile in and have no changes made to it or do I have to load another profile in its place to match my AL map.
Thanks for any help.
CAFB
-
RE: X56 Rhino Stick and Throttle Settings Help!
Nevermind. It works!!!
I just realized that I was using the Advanced settings tab to set up my Stick and Throttle instead of doing at the beginning in the AL opening page. It now works and saved the mapped settings.
-
X56 Rhino Stick and Throttle Settings Help!
I just replaced my defective X52 with a X56 and am using Cashman’s Profile for the X56 and 4.34. I also inserted Cashman’s DeviceDefaults and DeviceSorting into the Config folder. I’m still learning the sim and very much a noob. I am confused about the selection of either the stick or throttle in the game since it is connected with two USB’s. It shows up in the game as allowing only one selection (Either Keyboard, Stick or Throttle). I tried just selecting the Stick and using the advanced settings to map out the additional throttle controls. I played the Sim for a little while and the HOTAS worked great. However, I could not find a way to save the settings when I was finished. I went back into the game and I needed to redo all of the Throttle mapping. For some reason it appears that the DeviceDefaults are not setting the axis. I hope this makes sense because I really want this to work. Today was the first time I actually got to fly the sim without stick issues (X52) and It was fun experience.
I’m using AL Version 1.50
Thanks for any help.
CAFB
-
RE: Israeli Theater 4.34.3 update/full installer
It worked after updates. Thanks for your help.
CAFB
-
RE: Israeli Theater 4.34.3 update/full installer
Good catch. Thanks! I will try the updates tomorrow. I only downloaded when 4.34 first came out and stopped playing and just got back into the simulator.
Carswellafb
-
RE: Israeli Theater 4.34.3 update/full installer
Tried but still just disappears. I open the Edit Launcher and it gives me the following message "The program has crashed. A crashlog could not be written: C\Falcon BMS 4.34\User\Logs\2020-04-05_074611_crash.txt
I’m not a big code guy so I probably am missing something that I should be doing.
Found a way to copy bug report before it disappeared:
[00:00:00.000] **** Falcon 4.0 ****
[00:00:00.000] **** 2019 Billion Soft (Hong Kong) Limited. All Rights Reserved. ****[00:00:00.000] **** Falcon BMS 4.34.0 (x64) Build 19631 ****
[00:00:00.000] **** 2019 Benchmark Sims. All Rights Reserved. ****[00:00:00.000] Operating System: Windows 10 (10.0.18362)
[00:00:00.000] Create Window
[00:00:00.000] Windows cfg file size: 256, internal size: 256
[00:00:00.000] WM_ACTIVATE 1
[00:00:00.000] WM_ACTIVATE 0
[00:00:00.000] WM_ACTIVATE 1
[00:00:00.000] Valid F4 installation found [C:\Program Files (x86)\Steam\steamapps\common\Falcon 4.0\falcon4.exe]
[00:00:00.000] Init Display 2294942
[00:00:00.000] SystemLevelInit
[00:00:00.000] Initializing Sim Memory Pools….
[00:00:00.000] ## DeviceIndependentGraphicsSetup ##
[00:00:00.000] ## TheLoader Setup ##
[00:00:00.000] Loading texture_POLAK.bin with 224 sets, 3071 tiles
[00:00:00.000] ## Flush Refence start Cleanup if we dont get anything below in log something wrong in here ##
[00:00:00.000] ## FlushReferences Cleanup ##
[00:00:00.000] ## ObjectLOD Cleanup ##
[00:00:00.000] ## TheTextureBank Cleanup ##
[00:00:00.000] ## ThePaletteBank Cleanup ##
[00:00:00.000] ## TheColorBank Cleanup ##
[00:00:00.000] Info: 3DDB is new format (more than 2GB supported)
[00:00:00.000] Terrain: Load
[00:00:00.000] Terrain max texID: 3572
[00:00:00.000] Theater’s installed: Add-On Israel\Terrdata\theaterdefinition\Israel.tdf
[00:00:00.000] Theater’s installed: Add-On Balkans\Terrdata\theaterdefinition\Balkans.tdf
[00:00:00.000] Theater’s installed: Terrdata\theaterdefinition\Korea KTO.tdf
[00:00:00.000] Theater’s installed: Add-On Korea TvT\Terrdata\theaterdefinition\Korea_TvT.tdf
[00:00:00.000] Theater’s installed: Add-On emf\theaterdefinition\emf.tdf
[00:00:00.000] Theater’s installed: Add-On Kurile\TerrData\TheaterDefinition\Kurile.tdf
[00:00:00.000] Unable to open ‘alkans_Theater_4.34.exe’, filesOpen=0
[00:00:00.000] Theater’s installed: alkans_Theater_4.34.exe
[00:00:00.000] Theater’s installed: Add-on Iberia\TerrData\theaterdefinition\Iberia.tdf
[00:00:00.000] Theater’s installed: Add-On Israel\Israeli Theater Settings.exe
[00:00:00.000] GetCurrentTheater Israel
[00:00:00.000] TheaterReload
[00:00:00.000] theaterPath ‘C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\Israel’
[00:00:00.000] terrainPath ‘C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\Israel\terrain’
[00:00:00.000] Loading texture_POLAK.bin with 254 sets, 3285 tiles
[00:00:00.000] objectPath ‘C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\KoreaObj’
[00:00:00.000] ## Flush Refence start Cleanup if we dont get anything below in log something wrong in here ##
[00:00:00.000] ## FlushReferences Cleanup ##
[00:00:00.000] ## ObjectLOD Cleanup ##
[00:00:00.000] ## TheTextureBank Cleanup ##
[00:00:00.000] ## ThePaletteBank Cleanup ##
[00:00:00.000] ## TheColorBank Cleanup ##
[00:00:00.000] Info: 3DDB is new format (more than 2GB supported)
[00:00:00.000] GetCurrentTheater Israel
[00:00:00.000] Reading CT data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_CT.XML
[00:00:00.000] Reading CT data from XML -> Done, 3529 entries
[00:00:00.000] Reading UCD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_UCD.XML
[00:00:00.000] Reading UCD data from XML -> Done, 561 entries
[00:00:00.000] Reading FED data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_FED.XML
[00:00:00.000] Reading FED data from XML -> Done, 13551 entries
[00:00:00.000] Reading OCD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_OCD.XML
[00:00:00.000] Reading OCD data from XML -> Done, 656 entries
[00:00:00.000] Reading WCD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_WCD.XML
[00:00:00.000] Reading WCD data from XML -> Done, 696 entries
[00:00:00.000] Reading FCD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_FCD.XML
[00:00:00.000] Reading FCD data from XML -> Done, 939 entries
[00:00:00.000] Reading VCD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_VCD.XML
[00:00:00.000] Reading VCD data from XML -> Done, 414 entries
[00:00:00.000] Reading WLD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_WLD.XML
[00:00:00.000] Reading WLD data from XML -> Done, 556 entries
[00:00:00.000] Reading PHD data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_PHD.XML
[00:00:00.000] Reading PHD data from XML -> Done, 751 entries
[00:00:00.000] Reading PDX data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_PDX.XML
[00:00:00.000] Read PDX data from XML -> C:\Falcon BMS 4.34\Data\Add-On Israel\Terrdata\objects\Falcon4_PDX.XML -> Unknown token “TaxiwayLetter”No clue what this means but might be helpful for someone to assist me.
Thx Cougar!
-
RE: Israeli Theater 4.34.3 update/full installer
Help! I am trying to get back into Falcon BMS and I am having trouble with the loading of this theater. I’m using Falcon BMS 4.34 and the Israeli theater update 4-34-3. Every time I go to start the theater the start up screen will come up with BMS logo then hang for a few seconds then disappear. I can never get into the theater. I have no problems with the other theaters. Thanks for any help you can provide!
I tried to Debug but it just disappears also.
-
RE: Yet Another T.16000M FCS HOTAS Review and Setup
Thanks. The throttle and stick work when you test them out on the USB Controller app. They just don’t work with the script that is being generated. It’s like they are not being seen properly. No “root” coming up instead of TWCS Throttle. Appreciate the help.