CCP has dead zones and axis shaping so not issue for the “make more/less sensitive” Its not intrusive being only to initially setup the cougars firmware then closed. I do not see the conflict.
Posts made by CobaltUK
-
RE: T.A.R.G.E.T. or TM CCP?
-
RE: Researching axis and button assignments
As a long time Cougar user I can only say I have never had the issue OP refers to,
-
RE: RDP Server and BMS 3d resolution
The Veterans-Gaming server ran 3D fine in a 1024 window on the desktop until very recently. Although the loss coincided with the U2 update i think that is just coincidence and possibly some recent win10 update has changed something. I can`t see what else could have.
-
RE: NVG Graphic Problem
A Torch/Flashlight would be ideal to simulate RL. I wrongly thought BMS used to have it.
-
RE: Cant acces setup in 4.35 U2
Do you have any numbers for 1280x1024 please ? Though i guess probably will not work when the issue is only having 1920 as adaptor option for some unknown reason.
-
RE: Dx9display.dsp not used by 4.35 ?
Resolution for 3D window. There are no options except for 1920. This is a new situation but as i wrote not U2 related. I suspect its PC related rather than bms but out of ideas.
-
Dx9display.dsp not used by 4.35 ?
That was dumb. Its dx11 now. Ok so deleting dx11 dsp did not help. The issue is no resolutions available in setup option for 3D other than 1920x1080. Was ok before but now the situation even with a 4.35 U1 fresh installation.
-
RE: Any tips for using the Virpil WarBrd base with the TM F-16 joystick?
I have no advice but I am very pleased with my change of base to the WarBrd for my Cougar.
-
RE: Newbie player
I still have v4.33 and Falcon 4 that I bought off of Steam. I am having so much trouble. The typical message window telling me I don’t have Falcon installed. I’ve googled until my eyes went blind.
Is there some trick to loading BMS if one has a steam version of F4?
So wanting to get back into Falcon…I had it perfect on my old system, but alas it died. This new system runs Windows 8.1, 24Gb ram, 2 TB drive…GTX-1060 w/6Gb
Please send Help!
Can you run/play the original Falcon 4.0 ? If yes then it is installed. As Airtex2190 wrote, plenty of players using the steam F4 installation.
-
RE: Logitech replacement rudder pedals for HOTAS Cougar setup causing cursor issues
Ok well hopefully you clicked apply after any changes you made. I strongly suspect you have a very simple issue. Good luck with it.
PS be sure to use the supplied viewer to quickly see what axis is moving and with what assignment.
edit to earlier post [[COLOR=#333333] When you run the CCP there should now be red X ON A GREY BACKGROUND ]
-
RE: Logitech replacement rudder pedals for HOTAS Cougar setup causing cursor issues
Unsure whats wrong with that as i see image when click. But anyway it sounds like your are trying to use a TM program/tool for a separate non TM piece of hardware which is wrong. When you run the CCP there should now be red X ON A GREY BACKGROUND for the rudder and both toe brakes. Then in avioncs/advanced the cursor is assigned to Toe brake left and right of TM hotas cougar.
In the CPP GUI I have microstick X selected under column 7 and y under 8
-
RE: ALT HOLD won't engage - 4.35
Yes, thanks, I know. It just does not want to enable, nomatter the conditions.
I can not make out the mpo switch state in your pictures but for me that is the most frequent cause off AP loss.
You write “It happens during Balkans campaign” Does that mean not in KTO ?
-
RE: Logitech replacement rudder pedals for HOTAS Cougar setup causing cursor issues
If you no longer use TM rudder they should be off in the Cougar config panel. Example
Or are these Logitech pedals actually connected to the TM hotas ?
-
RE: How to open canopy in 4.35
ALT W and ALT Q to open or close or click the switch. Please read the manuals provided. A lot of time was given to provide you with all the information you need.
-
RE: Unable to get the installation to run
A quote from manual
"Download Falcon_BMS_4.35_Setup.zip from your preferred mirror and extract the contents to a specific folder on your hard drive. Please note: The Falcon BMS 4.35 Setup folder will still be needed after installation for further updates, so it needs to be located in a different place from the Falcon BMS 4.35 folder. Many users have confused the two folders in the past, or even deleted the Setup folder after installation. The important thing is that there must be two different folders: one for Setup/Install content and one for the actual game. Launch Setup.exe from the Setup folder. The installation will start and may take a few minutes. "
You need to install original Falcon 4 before running 4.35 setup. Manual http://www.ravico.com//ST/BMS_Cloud/4.35_Manuals/BMS_Manual_web.pdf
-
RE: IVC as client still on CS instead of P2P
From the manual “BMS will set CS automatically for individual connections, if necessary.” Not sure how true that is. By which i mean there could be quite a coarse setting in code that might or might not select CS.
-
RE: VG BMS4 Co-op | 24/7 Dedicated Server!
Due to the frequency of CTD on the server it will now be the standard default KTO rolling fire for several days until we see if stable without remnants of 4.34 campaign. 120th & 80th set non HQ. Hoping for new MC soon to allow for fresh construction of the VG modified rolling fire.
-
RE: FPS impact of 4.35
[older Core i7-3770 system, newer NVidia GTX 1660 Ti]
I’m getting a pretty serious FPS reduction, in 4.35 … seeing mostly 50-70 fps, down from 80-100 fps in 4.34.4.
Anyone else? Or is it just my ~8-year old CPU…
And yet … even at the lower frame rate, somehow 4.35 “feels” better to me than previous version. Improvements to the flight model? Or did the move to DX11 reduce end-to-end latency in the rendering pipeline?
Hoping santa brings me a Ryzen 5000 cpu. Until then, I’ll get by with 50fps.
Have you gone through each and every config option to be sure you are comparing fairly ?