Yep got it sorted. Just transplanted it from Full key file to Auto key file.
Thanks guys…
Latest posts made by Dallas
-
RE: CM3 Base/ TM Joystic combo cant shift on pinky switch
-
RE: CM3 Base/ TM Joystic combo cant shift on pinky switch
My (DX SHIFT) is missing ???
-
CM3 Base/ TM Joystic combo cant shift on pinky switch
Hi,
Have virpil cm3 base & TM warthog stick combo. Have no issues other than cant set pinky switch to shift option, any advice… -
RE: A Guide to Morphine’s Profile for BMS 4.33 and Beyond
Hi Gastone, Success!!
Looks like the unplug, reboot & swap usb ports worked even when just unplugging the usb hub my stick & throttle are plugged into. Joy.cpl is now as it should be & the keyfile works perfectly.Again, thanks for all your time & effort helping a nooby.
-
RE: A Guide to Morphine’s Profile for BMS 4.33 and Beyond
Hi Gastone, i really appreciate you taking the time to help me.
So i went back to page one of this thread, again downloaded the following files: BMS_Full_&_Morphine_434.key, & Warthog_BMS_Full_5_434.tmc. Firstly i noticed i was using the wrong tmc file for the Target Script Editor v 3.0.18.328, i was using the Full_4 tmc file & should have had the Full_5 option.
Also checked the drivers in Target GUI for the warthog devices & they are v12 for the stick & v23 for the throttle, ok so far.
I cut & pasted the key file into the BMS Config folder, ran Target Script Editor & located Warthog_BMS_Full_5_434.tmc. The script editor ran the file showing no obvious issues by showing the usual Throttle & Joystick usb connections, Virtual HID devices managed by script, Connecting virtual joystick, Device name set to Thrustmaster Combined, Connecting virtual keyboard & mouse, main returned 0.
Only thing i did notice was *** Allocated ProcInstances found from the previous run: use FreeProcinstance()*** on second line after Running Script? Not sure if thats supposed to be there or not.Loaded BMS, Setup, Controllers displayed “Thrustmaster Combined”, loaded BMS_Full_&_Morphine_434.key - Apply & Ok. Checked Advanced, Flight & Avionics, & all Axis were as per photos, all ok.
Closed BMS, & checked DeviceSorting.txt & displays as follows:
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Combined”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”also changed priority to “read only”.
Windows joystick control panel displays while Script Editor is running: Throttle - HOTAS Warthog, Thrustmaster Combined, Joystick - HOTAS Warthog. All in that order & all show status as OK
Shutdown the computer & rebooted, started up Track IR, Target Script editor, loaded Warthog_BMS_Full_5_434.tmc, all ok. Started BMS, checked for correct keyfile & axis in setup & launched a training mission.
Unfortunately it done exactly as before.
I’m wondering if there is a registry issue here, over the last few months i have tried several different profiles & also amending them, could i have caused a bit of corruption?Again, appreciate any help you can give me.
-
RE: A Guide to Morphine’s Profile for BMS 4.33 and Beyond
Managed to find graphical layouts from earlier in this thread, but in game functions seem to be more than on layout.
E.g. “Msl Step/NWS/AG” Toggle button also activates “CNTL” button on FCR. “Speedbrake In” also activates HSD Centre when used when speedbrakes are in. Parking Brake only works when Shifted otherwise also activates Console Lights & Parking Brake when Unshifted. Radar Alt switch when toggled also toggles Instrument Lights.
Are these additional functions that are not on the stick & throttle layout, or are my warthog controls & keyfiles all to pot. Also am i assuming correctly that this Morphine layout & functions correspond with the control layout & functions as per Tech Manual page 2-18. -
RE: A Guide to Morphine’s Profile for BMS 4.33 and Beyond
Hi All,
Been away from Falcon for a long long time, last played “Allied Force” with a cougar setup & had no issues programming it. Now have warthog & BMS, things have certainly moved on!!
Ok, i have downloaded latest morphine profile & installed & seems ok. But trying to get my head round/remember all the programed control options is complex, does anybody have an accurate graphical layout for all the programed buttons for this current setup.Thanks in anticipation,
Joe.
-
RE: Mud's Profile
Hi Fluke. managed to get this sorted. just got mixed up betwen Morphines throttle ident setup & Muds setup. As a newby to warthog i just went for prebuilt profiles till i get my head round TM’s programming software. Hopefully some more practice now & i can apply to a squadron.
Thanks.
-
RE: Mud's Profile
Hi Fluke,
yes throttle shows movement in ui.Advanced set as follows:
Flight control - Throttle axis - z rotation TM Combination
Right engine Throttle - z axis TM Combination -
RE: Mud's Profile
Hi, just getting back into bms after a long time off & changing to TM Warthog. Using muds awesome profile but cant set throttle idle detent. afterburner is ok to set but wont show initial travel to let me get the detent set even with the config idle cutoff ticked. I know this will be something simple but it sending me nuts. Can anyone help.