Thank you for the info.
But I’m thinking of waiting for Koble to do an official sheet.
Best posts made by ertiyu
-
RE: BMS Key File Help
-
RE: BMS Crashes after time spent in flight - Memory Usage warning appears moments before crash - Memory Leak issue?
Hello to you I also had the same crash on June 10 during a multi flight.
I was in the landing phase.
The memory window appeared for a few seconds then Falcon crashed, I also have a text file but no .dmp (0 bytes)
My setup is:
W11(64bit)
16gb
nvidea 1060 with 6gb
a Ryzen 5 3600Xhttps://www.dropbox.com/s/qa91nfqh74rcw52/2022-06-10_212815_crash.txt?dl=0
-
RE: Alt Launcher not recognizing AB detent for Orion II
@Jumpstart5179
Good morning,
Have you defined the position of your afterburner in simAppPro via the configuration tab?I have that as a position when I’m in “Buster” position.
-
RE: BMS Key File Help
Here is a modified excel file,
https://www.dropbox.com/s/6m7ka929dtonldu/Excel BMS_437.zip?dl=0
It features the addition of ECM functions
SimXMTASPISOper 116 0 0XFFFFFFFF 0 0 0 1 "ECM: XMTASPIS Knob - Operate" SimXMTASPISStdby 116 0 0XFFFFFFFF 0 0 0 1 "ECM: XMTASPIS Knob - Standby" SimXMTASPISToggle 116 0 0XFFFFFFFF 0 0 0 1 "ECM: XMTASPIS Knob - Toggle" SimEcmPowerOn 116 0 0XFFFFFFFF 0 0 0 1 "ECM: Power Knob - On" SimEcmPowerOff 116 0 0XFFFFFFFF 0 0 0 1 "ECM: Power Knob - On" SimXMitInc 116 0 0XFFFFFFFF 0 0 0 1 "ECM: XMT Knob - Increase" SimXMitDec 116 0 0XFFFFFFFF 0 0 0 1 "ECM: XMT Knob - Decrease" SimECMBit 116 0 0XFFFFFFFF 0 0 0 1 "ECM: Bit Test - Test" SimEcmMode1 116 0 0XFFFFFFFF 0 0 0 1 "ECM: Mode 1 - Toggle" SimEcmMode2 116 0 0XFFFFFFFF 0 0 0 1 "ECM: Mode 2 - Toggle" SimEcmMode3 116 0 0XFFFFFFFF 0 0 0 1 "ECM: Mode 3 - Toggle" SimEcmMode4 116 0 0XFFFFFFFF 0 0 0 1 "ECM: Mode 4 - Toggle" SimEcmMode5 116 0 0XFFFFFFFF 0 0 0 1 "ECM: Mode 5 - Toggle"
and adding
SimExtlMasterCycleUp 116 0 0XFFFFFFFF 0 0 0 1 "EXT: MASTER Knob - Cycle up" SimAntiColCycleUp 116 0 0XFFFFFFFF 0 0 0 1 "EXT: ANTI COLLISION Switch - Cycle up" SimIFFMasterCycleUp 116 0 0XFFFFFFFF 0 0 0 1 "AUX: MASTER Knob - Cycle up"
I did not add the functions for VR and for the radar cursor.
Thanks again to Kolbe for this spreadsheet.
-
RE: Build EHSI with Helios
@jaycee
Hello
Here is a profile featuring only the bottom of the EHSI.
I also put the image folder. -
RE: AL writes the .key in UTF-8-BOM
@airtex2019
Hi, after testing with the U3 still the same problem, it wasn’t just the UTF-8-BOM that was causing the problem, I think it’s the Unix recording mode that Excel doesn’t like
two screenshots with the same .key.
the first is the file created by AL, the second is a copy/paste into a .txt file created with windows, and renamed to .key -
RE: BMS Key File Help
Hello
Actually I had this problem too.
This comes from the fact that in the Falcon BMS.cfg file there is a command which increases the number of buttons per joystick from 32 to 128.set g_nButtonsPerDevice 32
I put 32 and everything is back to normal.
-
RE: BMS Key File Help
@antares190 To use the key file generated by the excel file, you must not use the Alternative Launcher.
You must launch Falcon via the exe present in the “Bin” “x64” folder.
Latest posts made by ertiyu
-
RE: Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments)
Hi
a proposal for improvement.
Have a visual of the keyboard with the command assignments as in the excel file in order to be able to visualize the free combinations for the new assignments.
Thank you again for the work and the follow-up provided. -
RE: Alt Launcher not recognizing AB detent for Orion II
@Jumpstart5179
Good morning,
Have you defined the position of your afterburner in simAppPro via the configuration tab?I have that as a position when I’m in “Buster” position.
-
RE: AL writes the .key in UTF-8-BOM
@airtex2019
Hi, after testing with the U3 still the same problem, it wasn’t just the UTF-8-BOM that was causing the problem, I think it’s the Unix recording mode that Excel doesn’t like
two screenshots with the same .key.
the first is the file created by AL, the second is a copy/paste into a .txt file created with windows, and renamed to .key -
RE: AL writes the .key in UTF-8-BOM
actually notepad++ indicates UNIX, for the BMS-Auto.key file.
I found a trick to be able to import the BMS - Auto.key commands into the ecxel sheet, simply copy and paste the text into the “import” tab, that way the text is well written in each line.
-
RE: BMS Key File Help
Good morning,
FYI I found a limitation to the ecxel sheet
it cannot correctly read the .key created by AL, which is in UTF-8-BOM
He sticks everything in box A1
I reported it on the bug section. -
AL writes the .key in UTF-8-BOM
Good morning,
Everything is in the title.
Is it possible in a future version to write the .key file in UTF-8?
Because the excel sheet, BMS-Key-File-Editor cannot correctly read the UTF-8-BOM format
It pastes all the text in cell A1, while the text in UTF-8 is copied line by line.Thank you again for the superb work done.
-
RE: X-56 key assignment not register in game
Now I no longer use the Logitech software to configure my X56.
I pass by Helios. Just add the stick and throttle interface and you have the possibility to add shortcuts via a lua script.
I was even able to add functions to mode 1,2 and 3.
Mode 1 for Air/Air
Mode 2 for Nav
mode 3 for Air/Ground -
RE: BMS Key File Help
@antares190 To use the key file generated by the excel file, you must not use the Alternative Launcher.
You must launch Falcon via the exe present in the “Bin” “x64” folder. -
RE: BMS Key File Help
Thank you for the info.
But I’m thinking of waiting for Koble to do an official sheet. -
RE: BMS Key File Help
Hello
Actually I had this problem too.
This comes from the fact that in the Falcon BMS.cfg file there is a command which increases the number of buttons per joystick from 32 to 128.set g_nButtonsPerDevice 32
I put 32 and everything is back to normal.