Hi everyone, Just to be aware if something was changed related to AIM-120.
Today I fired 4x120 to MIG21 at 15 miles and none of them reached the MiG21. I kept blocked the boggies and wait until pitbull.

Under my view this is not possible, I thing made nothing wrong.

<p>@sheref Sorry, Just one more question not to make a mistake. To install, I just have to copy the files in each folder I have with the different Scenarios?</p>

<p>During a flight when I ask the AWACS for the picture suddenly the sound volume is lowered and it is impossible to hear what it says. I press the COM1 wheel and it sounds fine but the volume goes down again a few seconds later. Does anyone know why this happens and if there is a solution?</p>

Thanks for your explanations and the video, I got a clear view of what I need to do.

@airtex2019

I’m going to follow your advice and switch from Morphine to the Launcher.

I’m not very skilled with this kind of stuff, so I hope you don’t mind me asking a question: In my Morphine profile, I use the Paddle Switch as the Shift key. For example, DMS down with Shift becomes HSD range down, or MSL Step with Shift becomes AR door.

Could you tell me how I can set up the Paddle Switch as the Shift key in the Launcher?

Thanks in advance

@airtex2019
Thanks for the advice. I will find out.

I have a HOTAS Warthog and use Morphine’s profile. Before the last update, everything was working perfectly, but after the update, the *.key file I was using (Morphine_BMS_437_Full.key) stopped working. After many tests, I found an older one (BMS_Full_&_Morphine_434_Pad.key), and I managed to get everything working again.

My concern is that with a future update, the Morphine profile might stop working again.

Anybody, any idea why all of this?

thanks, I just found the fix.

I’m participating in the TvT of Falcon Online, and every time I take off, after a few minutes, both MFDs turn off. I’ve tried turning them off and on again, but it didn’t work. Does anyone know how I can fix this?

I have the last version of Falcon BMS

@airtex2019

Thanks a lot.

Well now in my isntallation everything works. This issue created a lot of doubts on the new file: Falcon BMS User.cfg so I will not use it.

I have log file where I have all the modifications I do on Falcon BMS.cfg so is a matter of updating it each time I make a modification, is not a big job.

The last 30 days I’ve been trying to make the Morphine profile that Gastone has designed for 4.37.
There was no way, despite the fact that I have reviewed the installation a thousand times, the profile did not work in 4.37, even Gastone no longer knew what to tell me.

One step of the installation consisted of including in Falcon BMS User.cfg a line for a certain key (In the warthog, the paddle).

Today I deleted that line from Falcon BMS User.cfg and copied it directly into Falcon BMS.cfg and the profile has finally worked correctly.

Falcon BMS user.cfg has not worked according to page 12 of the Thecnical Manual.

Question: Does this file simply rewrite a certain line with the new values?

If this line does not exist in Falcon BMS.cfg and we only put it in Falcon BMS User.cfg, does the system understand that it must be used or, since it does not exist in Falcon BMS.cfg, does it ignore it?

Thanks in advance

Thanks Gastone,

What you have explained makes sense and that is why I have thought again, I have reviewed the entire installation and apparently everything is correct.
I have “set g_nHotasPinkyShiftMagnitude 512” in Falcon BMS User.cfg and I thought that maybe this is causing problems, it shouldn’t, but just in case I tried the following:
I have deleted “set g_nHotasPinkyShiftMagnitude 512” from Falcon BMS User.cfg
I have added this line directly in Falcon BMS.cfg.

I have tried and it has worked!!!

I don’t understand why the setting in falcon BMS user.cfg did not override the ones in Facon BMS.cfg . That should be an issue. I will post it at the thecnical support to let see.

I want to thank you for your patience all this time.

Thanks Gastone.
I didn’t want to bother you, when I said it didn’t work I was obviously referring to my installation. If it has bothered you, I apologize.

I have done the installation again from the new files from the link that you have put and I have made sure that everything is fine. I have tested it again and when I press Paddle everything goes wrong, every time I press something on the joystick it does something wrong.

I don’t think you understood what I said. I use the version: WarthogBMS_Full_5_434_Paddle.tmc
with the file: Morphine_BMS_435_full.Key
both from previous versions and everything works correctly in the current BMS: BMS4.37.

Anyway, thank you but I am not going to try again to make the new version that you have created work and I will continue with the one that I have managed to make work.

Regarding the reasons that you state why it does not work in my installation, allow me to answer you:

1.- No, I have not edited that file.
2.- That line is in the Falcon BMS User.cfg
3.- I have never said at any time that I have used files from Version 4.37 in previous versions.

The proof is that I have done the installation again and everything remains the same.

It can be concluded that the problem is mine since there have been many people who have tried it and it works. I ask you, please, do not attribute it to the fact that I have done the installation wrong or that I have overcopied files, because it is simply not true. I repeat it again, there is something that conflicts when I press Paddle and the configuration stops working on my computer

Thanks and I hope in the future if you launch a new version I will be able to use it.