Thank you Depapier. Appreciate your reply.
Posts made by gizmo
-
Hi Everyone
Hi All,
I’ve been away from BMS for a long time and i would like to come back to flying the F16. I still have the BMS installed on my system but im unsure which installer i have and is it ok if i installed the latest 4.34 U4 directly over what i have or do i need to installed 4.34 U1,U2……etc? Your advise is greatly appreciated.
Thank you
-
RE: 4.34 Correct Installation
Thank you very much Sir.
Really appreciate your reply.
-
4.34 Correct Installation
Hi Guys,
Its been a while I’ve been away from Falcon for a while. Would like to know if this will be the correct way to install the new 4.34 update.
Falcon 4 (Steam Version) + 4.34 Update
or
Falcon 4 (Steam) + previous Increment Update prior to 4.34
Your help is greatly appreciated.
Thank you
-
RE: Livery Request and Installation
Hi All,
Noted and i shall refrain from asking “How Long” on this forum :). Anyways, i shall wait for the release. Merry Christmas to one and all and a Happy and Properous 2018 to all. Good Health and of course…WORLD PEACE!
Regards
-
RE: Livery Request and Installation
Thank you for your reply. When will be the next version out?
Regards
-
Livery Request and Installation
Hi all,
Can i ask if i would like to request for a Republic of Singapore Airforce livery for th F16, where can i get it? Ive seen on some screenshots and i would like to request for the livery please.
Thank you
-
RE: Thrusmaster Hotas Warthog not working
Hi All,
Just to update everyone, I tired everything i could to get the TH to work including the last ditch effort by Frederf but could not get it working. So technically i lost it and what i did was that i removed all devices that is connected to my PC with the exception of my Mouse and keyboard, uninstalled TM Drivers, TARGET Software and did a reboot. Following which, i downloaded the TH driver and software (TARGET) and reinstalled it all over again. Connected by Throttle 1st followed by my stick and i tried running MUD’s profile…Guess what…IT WORKED!!! So what i did was that i reconnected back all other devices back to my PC. So as on now…it’s working as it should be. With this being said, I would like to Thank you all for your assistance and guidance. I’m sure i will face another issue someday but I’m hoping not too. Till then …Happy Flying to all.
Thank you and Regards
-
RE: Thrusmaster Hotas Warthog not working
Hi Weaklink,
Thank you for your solutions. Previously i did try plugging into the PC directly but that didn’t work. I will try that again and will revert back. BTW, which powered HUB would you recommend getting?
-
RE: Thrusmaster Hotas Warthog not working
Hi Terminator and guys,
I am using Win 10 and i really cant seem to find my TM on my device Manager. I am also using a unpowered USB which are directly connected to my PC.
-
RE: Thrusmaster Hotas Warthog not working
Hi Terminator,
Yes i am new to this forum. You are absolutely correct about not giving the info required and there is no excuse for that. I do appreciate that there are fellow simmers willing to help and i thank you for that. Moving forward, here is the info you mentioned which i have compiled.
-
Trying to use Mud’s profile.
-
I did select Thrustmaster Combined from the main controller page but my throttle and stick doesn’t work.
-
As for the device setting… pls see below
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Combined”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{076306A3-0000-0000-0000-504944564944} “Saitek Pro Flight Rudder Pedals”I have uninstalled drivers for TM Hotas completely and reinstalled the drivers following which i plugged my HOTAS (stick and throttle) only to ensure only those were detected but to no avail. Problem still persist. In BMS controller setup page, it doesn’t even show Thrustmaster Combined anymore.
Following is the response from the Script editor when run Mud’s profile:
Running script: C:\Program Files (x86)\Thrustmaster\TARGET\scripts\BMS 4.33 - Mud.tmc
Mapped plugin module “C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll”
Compile Succeeded.
Physical USB HID devices managed by script!
Currently plugged USB HID devices[2]:
1: “Throttle - HOTAS Warthog” - “USB\VID_044F&PID_0404&REV_0100”
2: “Joystick - HOTAS Warthog” - “USB\VID_044F&PID_0402&REV_0100”
Installing filter driver to VID_044F&PID_0404. Please Wait…Done!
Error:(internal) cannot associate a filter with the selected USB HID device “VID_044F&PID_0404”
Installing filter driver to VID_044F&PID_0402. Please Wait…Done!
Error:(internal) cannot associate a filter with the selected USB HID device “VID_044F&PID_0402”
USB HID device with hardware id “VID_044F&PID_b351” cannot be found
USB HID device with hardware id “VID_044F&PID_b352” cannot be found
USB HID device with hardware id “VID_044F&PID_B10B” cannot be found
USB HID device with hardware id “VID_044F&PID_B687” cannot be found
USB HID device with hardware id “VID_044F&PID_B679” cannot be found
Virtual HID devices managed by script!
Connecting virtual joystick…Script stopped!
Done
Device name set to Thrustmaster CombinedRuntime Error: STOP request received while running main on line 18 in “C:\Program Files (x86)\Thrustmaster\TARGET\scripts\BMS 4.33 - Mud.tmc”
Error:Script run timed out!Regards
-
-
RE: Thrusmaster Hotas Warthog not working
Hi Terminator,
How do i do that and where can i find the devicesorting.txt? Would you be able to guide me pls?
-
RE: Thrusmaster Hotas Warthog not working
Hi Guys,
I just checked on DXDIAG that my throttle is no 1 and my joystick is no 2. I tried changing to all USB slots including my USB 3.0 and still keeps having the same numbering. What else can i do to rectify this issue??? Very frustrating. Really need your help please.
-
RE: Thrusmaster Hotas Warthog not working
Hi Guys,
Thank you for your replies. What actually happened was that I unplugged my TM Hotas from my PC and replugged into a different USB. From that point on, Target dectects my TM and shows TH Combined but in the game setup, when i choose TH Combined, my stick and throttle doesn’t move unless I change it to TM Thttotle and stick manually and my key profiles doesn’t work.
Thank you
-
Thrusmaster Hotas Warthog not working
Hi Guys,
I’m having this problem. I run the script editor and it compiles success but when i got into my BMS Setup page, when i choose Thrustmaster Combined, the Throttle and the joystick does not move at all. I tried moving the usb to other various slots including a 3.1 slot but still the same issue. Am i missing out something ? When i choose Throttle directly,it’s no issue. Works fine. Likewise for the Stick. Really need your help please.
Thank you
Regards
-
RE: Rybo's Profile - Never disappearing, No shifted layer, Easily customized
Hi Rybo,
Thank you for your reply. Just to update you, even in the 3D world, nothing works. Only the trim works. Perhaps a team viewer session would be great if you are fine with that. Please take note I’m in Singapore and time difference is +8 hours and i work on shift.
Regards
-
RE: Rybo's Profile - Never disappearing, No shifted layer, Easily customized
Hi Rybo,
Thank you for the profile but i have a question, i followed your instructions and changed the default txt as well but when i run the TMC file and key file, only the trim seems to be detected on the Falcon BMS setup page . Other keys even on the throttle is is not assigned. Am i missing on a certain step or did i add wrongly? Please help!!
Regards
-
RE: Confused need Helo
Hi rmax,
Thank you for the quick reply. Really appreciate it.
Regards
-
Confused need Helo
Hi Guys,
I am coming back to Falcon after a very long time and i really confused which i should install after installing Falcon 4?
Falcon BMS 4.33 U1 - Full Installer or Falcon BMS 4.33 U2 - Incremental Installer or Falcon BMS 4.33 U3 - Incremental Installer
Really need your guidance please.
Regards