Offline
Hi again, unfortunately I don’t know how or even if it is possible to get a cloned aircraft working. I messed around a bit in a theatre with this to modify a F16 a bit but this never worked out. Using liveries from another aircraft is the extend of my skills 
If @MaxWaldorf states that it is not viable, there is not much left to say.
When I recon in 2D and assign specific targets to my flight giving ‘Weapons free AG’ & ‘Attack Targets’ in sequence my flight elements release their payload as intended. This is working for JSOW >15nm out as well as JASSM >50nm out…though I don’t use the latter that often.
Hi, just to clarify: you mean using turkish liveries/skins in another theatre or du you want to transfer a completely different model?
EDIT: the simple (and not particularily elegant) way to do would be e.g. if you are flying the F16CM-40 in EML (sorry, I don’t use this theatre, so I don’t know which name the specific plane has in EML) you open the Falcon BMS editor - open EML theatre - click on Vehicles tab - search for your desired airframe - double click on it - in the pop-up window of Vehicle Data Details you click on the CT Record Button - in the newly opened Class Table Data Editor you search for the Value next to Graphics Normal (eg. 1982 or something)
Then you search in the directory Data/TerrData/Objects/models in the EML-Addon for the folder with the graphics value. This has the skin for your desired turkish F16 in it.
You then copy said folder in Data/TerrData/Objects/models in your main file structure because Georgia uses the files for KTO as well. If there is an existing folder with the same name be careful and backup your original folder!
Then you open with BMS editor the F16CM-40 in Georgia, do the same as above and get to the Graphics Normal value and overwrite it with the desired name/value of your transferred model folder. Voilá, now your F16CM-40 starting from e.g. Ercinkan has a Turkish livery!
If you had to overwrite an existing folder in the main structure as mentioned, you can skip the step with overwriting the Graphics value but now every single F16CM-40 will have turkish skins in KTO, Balkans and Baltic theatres also…I know, not elegant but I myself as a noob implemented Have Glass skin for F16CM-52 this way I’m sure that there is a way better way, If someone can provide it I’m glad. But it will work my way at least…have fun!
@foxster Hi, just wanted to let you know how much I appreciate your tool. It cranks up immersion to eleven!
@drtbkj Thanks a lot! That did the trick. I initially started a new campaign, saved it and modified my own savegame with MC. Modifiying the original save works, I wasn’t aware that these files can/should be altered also. I owe you one
Hi @kungfoo , just got aware of your tool, tried it, love it! I’m quite new to BMS and this boosts my immersion with my meagre ‘cockpit’ quite a lot.
Funfact: I always wanted to fly the F15e from time to time because - you know - mudhen is one sexy beast. What made me hesitant until now is that the pilot has no RWR and the WISO is just cosmetics of course. So I’m blind regarding threats. With your additionally exported RWR the game has changed.
So thanks a lot! BR
@Scorpion82 I did as you wrote and as you described it in the documentation. If I missed something, please let me know.
Oddly enough, when I jettisoned both fuel tanks in a sortie, the designator from central HP got jettisoned as well as the one on the left wing. But I still had my TGP working Maybe this helps in troubleshooting.
@Scorpion82 Wow, as @drillerman52 stated before, this is a blast down memory lane! I tip my hat!
One minor issuecan be reported, I am not able to give power to the right HP (TGP). The LDP-button seems not to be working. I tried this when ramp-starting and TGP stays OFF. I double-checked when taxiing where the HP is powered on by default (TGP just in standby) and tried to power it off with LDP-button. But that doesn’t work either.
BR
EDIT: i guess I found the root cause, the AAQ28 is shown in the SMS page as HP where you expect the Fuel Tank on the right wing. There seems to be a mixup.
@kungfoo Thank you so much for caring, I already owe you one!
@Trigger sorry, but in this case I’m totally oblivious. I guess there is not much to do here, w/o your ‘trigger’ (pun intended) for your package AI does what AI does
@kungfoo: sorry to bother you in this rather old thread…If I use Falcon BMS control with F18e’s I get a rather fancy issue…parts of the hud are being visivble as overlay over the exported MFDs. Is there a way around this?
Hi again, unfortunately I don’t know how or even if it is possible to get a cloned aircraft working. I messed around a bit in a theatre with this to modify a F16 a bit but this never worked out. Using liveries from another aircraft is the extend of my skills
If @MaxWaldorf states that it is not viable, there is not much left to say.
@Trigger you’re welcome! I’m happy to help.
When I recon in 2D and assign specific targets to my flight giving ‘Weapons free AG’ & ‘Attack Targets’ in sequence my flight elements release their payload as intended. This is working for JSOW >15nm out as well as JASSM >50nm out…though I don’t use the latter that often.
Hi, just to clarify: you mean using turkish liveries/skins in another theatre or du you want to transfer a completely different model?
EDIT: the simple (and not particularily elegant) way to do would be e.g. if you are flying the F16CM-40 in EML (sorry, I don’t use this theatre, so I don’t know which name the specific plane has in EML) you open the Falcon BMS editor - open EML theatre - click on Vehicles tab - search for your desired airframe - double click on it - in the pop-up window of Vehicle Data Details you click on the CT Record Button - in the newly opened Class Table Data Editor you search for the Value next to Graphics Normal (eg. 1982 or something)
Then you search in the directory Data/TerrData/Objects/models in the EML-Addon for the folder with the graphics value. This has the skin for your desired turkish F16 in it.
You then copy said folder in Data/TerrData/Objects/models in your main file structure because Georgia uses the files for KTO as well. If there is an existing folder with the same name be careful and backup your original folder!
Then you open with BMS editor the F16CM-40 in Georgia, do the same as above and get to the Graphics Normal value and overwrite it with the desired name/value of your transferred model folder. Voilá, now your F16CM-40 starting from e.g. Ercinkan has a Turkish livery!
If you had to overwrite an existing folder in the main structure as mentioned, you can skip the step with overwriting the Graphics value but now every single F16CM-40 will have turkish skins in KTO, Balkans and Baltic theatres also…I know, not elegant but I myself as a noob implemented Have Glass skin for F16CM-52 this way I’m sure that there is a way better way, If someone can provide it I’m glad. But it will work my way at least…have fun!