@Mystic_J well done! Excellent!
Posts made by lgbomber
-
RE: [Released] EMF v1.9.0 (BMS 4.37 U1)
-
RE: Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments)
@danaos75 blind old man needs help…
thanks… -
RE: Falcon BMS Alternative Launcher (Easy Setup, Keep Joystick Assignments)
Happy new year!
Launcher is great! I’m not sure if this has been discussed previously. I’m an owner of an old cougar throttle with analog cursors microstick, antenna and range pots with a lot of dirt at center positions. My rudders and for some reason warthog stick have the same problem too. Using dead zones is critical for me and maybe for others too. So it would be helpful if dead zone capability is added for the axis. Also axis shaping may be useful for those that fly other aircrafts than F16. Do you plan to add such options later on?Keep up the good work! -
RE: [Released] EMF v1.0.6 (BMS 4.35 U1)
Alas, nothing to enjoy for me before U2. I got completely disgusted with unstable flights and unreportable bugs.
???
-
RE: [Released] EMF v1.0.6 (BMS 4.35 U1)
At Limnos AB I get this graphics glitch, it disappears when you zoom in.
Anything I can do about it?
Maybe its another aircraft taking off? Smart scaling on? Reproducable? Just some ideas.
-
RE: [Released] EMF v1.0.6 (BMS 4.35 U1)
I think and your pit is american too :D:D
Go to c/falconbms4.35/data/add on emf/art/ckpart
Open the file for the f-16 that you want, and look if you have, in this file, 2 more (3dcokpit & 3dbuttons)
You have only the 3dbuttons.
look and the other F-16s
From the zip, that you download EMF, extrac somewhere only the ckpart file and after copy past in c/falconbms4.35/data/add on emf/ARTYeap. I fixed it yesterday. It was a corrupted file. Thanks anyway
-
RE: [Released] EMF v1.0.6 (BMS 4.35 U1)
….maybe a small mistake in de cockpit file, wrong cockpitwingsmodel number. Its a heck of a job to make so much f-16 models with a perfect score.
I have this issue with the new update. I’m asking because if I’m the only one with that problem it’s obvious that I have to reinstall a clean bms 435.1 update and then the new EMF. Reinstalling only the update of EMF on the existing 435.1 didn’t work.;)
-
RE: [Released] EMF v1.0.6 (BMS 4.35 U1)
Something is wrong with theese models I think.340 skin but the wing…american style
Anyone else with the same issue? -
RE: [Released] EMF v1.0.5 (BMS 4.35)
For anyone that might be interested if you start building a campaign from struts be sure you have not RD’s MAP selected in EMF settings.exe. It leads to a non working CAM file. HiRes MAP is fine.It took me some days to figure it out. Maybe it’s a known issue.
-
RE: [Released] EMF v1.0.5 (BMS 4.35)
Can you share the SAVE0.cam you prepared?
Sorry m8. As I said it is for my own use and I have not such permissions.
-
RE: [Released] EMF v1.0.5 (BMS 4.35)
Hi M_J,
I managed to build a campaign for my own use using the SAVE0.cam that works perfectly either single or multiplayer conditions. Then I tried to build a second one with a different scenario using cam files 1 to 5.Every time the second campaign starts only if it is saved as scenario: save0 and saved name: save1 to save5 depending which cam file I used with MC. But even when started the second campaign merges the two “scenarios” frag missions for both senarios and messages from both campaign senarios pop up as news concerning countries that are not active in the second campaign a fact that seems partially logical. When I save the cam as scenario:save1 to 5 and saved name:save1 to 5 campaign doesn’t start. Are cam files 1-5 corrupted or I have to study more? In BMS 434 I managed to build 4 campaigns without problems. Thanks in advance.
All the best,
John -
RE: [Released] EMF v1.0.4 (BMS 4.34 U2)
PS: Ashamed to say we took the wrong turn off the RW at Souda and had to park it with the civvies… my bad
It’s ok m8! Girls at I.Daskalogiannis are very beautiful.!;)
-
Island capture.
Hi everyone!I’m messing around trying to build a campaign for my own use based on EMF theater and using Mission Commander. When it comes for land objectives everything works perfect red forces engage blue forces capture objectives according to tri file. But when it comes for islands nothing happens. Do I have to connect the islands with maritime intersections and check them as frontline objectives? Is there any other way? I assign a ch47 sq near an air assault battalion and command capture of the island city. When running the campaign the ch47 delivers the battalion on the island successfully but that happens only once. I’ll keep trying …any help appreciated.
-
RE: Jan Has F-16 LV4.2 Update packs
As promised, here is an update pack with Jan Has LV4 F-16s. This pack already has them complied into the correct file and installed in their respective folders
Updated with ALW 4.0
These are compatible with update 4
MAKE SURE YOU BACKUP YOUR INSTALL
Here is the link for the default KTO theaterKorea JH LV4.3 F-16 and ALW pack
Here is the link for the Balkans TheaterBalkans JH LV4.3 F-16 and ALW pack
Here is the link for the Israeli Theater
Israeli JH LV4.3 F-16 and ALW pack
To install- Dowload the zip files.
- Extract them to your desktop
- Run the .exe file
- Point them to your Falcon BMS 4.34 root folder
- It should ask if you want to overwrite files….say “Yes to All”
After you have finished running the installer, the models are installed.
BMS 434.4 Yesterday I downloaded both packs for korea and balcans .I get this with HAF f16 b52+ non CFT in both theaters.
Fresh installation of BMS and Theaters.
Any ideas?
Thanks! -
RE: [Released] EMF v1.0.4 (BMS 4.34 U2)
The exhaust angle label is a nuance and has to do with the way Janhas model was created regarding the NVGs.
If you don’t want to appear (I forgot to remove it), go to Add-on emf/sim/acdata and find the entry f16bl52+.dat
Open with notepad and find the entry:NVGs - use VTOL commands
#–---------------------------------------------------
IsVtol 1Change 1 to 0, that is IsVtol 0, save and fixed.
I did it with notepad. It was catastrophic! in 3d one gear was missing and always CTD. I had to replace the modified dat file with the original one from Jan Has.
I dont know if it was me or just the notepad…;) -
RE: [Released] EMF v1.0.3a (BMS 4.34)
Go to parents.dat and change the very last entry from lod 4 to lod 17 and try again.
Yeap! Thats it. Thanks again.;)