Best posts made by LorikEolmin
-
LMid, a Desert Storm campaign Mod in Mideast 128, compatible with 4.37.3.
LMid 4.37.3D
30th of November, 2023Previous saves are compatible with this version.
Welcome to this MidEast128 mod for BMS 4.37. It requires the MidEast128 theater to work. That is on purpose, and out of respect for the MidEast128 team.
(https://forum.falcon-bms.com/post/364726)It actually contains adjustments for the Desert Storm campaign, the only one available inside.
Unzip the file in you (BMS)\Data folder, at the same level as “Add-On MidEast128”
Add the…
Add-On LMid\Terrdata\theaterdefinition\MidEast128.tdf
… to your data\Terrdata\theaterdefinition\theater.lst file
Check the F16 block comparison for the changes that are provided.
Think of:- block 15 as standard air-to-air fighters
- block 25 and 30 (better engine) as more modern air-to-ground specialized squadrons
- block 40 as night strikers.
If you fly as a squadron in a campaign, placing 2, 3 or 4 different blocks (not set to HQ) will allow you to think of different tactical solutions for your objectives.
There’s a WeatherMapsUpdate folder provided, and starting fmap are already in the campaign folder.
Enjoy!
Lorik
Thanks:
MidEast128 team
Cougar56th
Neystratiou
Starrats
Falcas
Driftkioti
Starfury
Starfury again, I guess
Lukrop
Ripper
Figmo42
Erwand
Nuno Santos (Clouds Pack!)
Unleashed Code
GOOD BOB
Kaos
drtbkj and the OFM
and the unmentioned BMS team members and the whole community, obviously!WDP: when asked “Mission files belongs to theaters: etc” --> say YES.
WDP still: If you want WDP to load MidEast map, place your save in the original MidEast campaign folder (just copy the file while you open). When you’re done, retrieve the ini you need in there too.
OR
You can load your mission, choose any flight, then switch map to MidEast, and click “Different flight”. Then choose your real flight. All should go smooth from then.Link to download:
https://drive.google.com/file/d/1LVVlCcq08BlnFAlOrHhog9BqaFJa8mwI/view?usp=share_link -
LKTO 4.37: theater mod for 4.37.3.
This is compatible with BMS 4.37.3
This is LKTO 4.37.3A - Mike and LKTO 4.37.3A + Papa.
26th of October 2023.Campaign saves should be compatible with previous version.
LKTO is installed as an independant theater, but this is a small size zip.
Find the Readme in the Add-On folder, with other useful docs describing the campaigns.
This mod adds 12 new campaigns, many of them containing legacy material (Fox 1 and 2…).
WDP: When asked “Mission files belongs to theaters: etc” –> say YES.
The link to download LKTO 4.37.3A
https://drive.google.com/file/d/1FPUkdNrEBJlnFU7Ur6DGgo0YOUgcxsSm/view?usp=share_link -
EMFL - campaigns for EMF
EMFL 4.37.3A
22nd of December, 2023Previous campaign saves and TE should be compatible with this version.
Welcome to this campaigns mod for BMS 4.37.3. It requires the EMF theater to work.
Unzip the file in you (BMS)\Data folder, at the same level as “Add-On emf”
Add the…
Add-On EMFL\Theaterdefinition\EMFL.tdf
… line to your data\Terrdata\theaterdefinition\theater.lst file
This mod contains 4 campaigns, playable from two sides.
Check the EMFL.pdf to know more about them.
Enjoy!
Thank you to the EMF team for letting this happen, and to the BMS team for their work on BMS and fixing it.
WDP: when asked “Mission files belongs to theaters: etc” --> say YES.
WDP still: If you want WDP to load EMF map, place your save in the original EMF campaign folder (just copy the file while you open). When you’re done, retrieve the ini you need in there too.
OR
You can load your mission, choose any flight, then switch map to EMF, and click “Different flight”. Then choose your real flight. All should go smooth from then.Link to download:
https://drive.google.com/file/d/1i1KZtcf6x9x5d4AZhyYOiQVfmVAjGF2e/view?usp=sharing -
RE: 4.36 Screenshots
I suppose it’s still me, even though it’s KTO and vanilla.
YES, I know, I wasn’t expecting it to work visually, nor even still have a dedicated cockpit.
I pictured a middle-finger in the basket and all felt ok. Never been more appropriate, eh Merlin?
It does work functionnally though, I left visual cues from the F16 cockpit if you want to reproduce this at home. Another kind of challenge, hooking up the basket without seeing your pole. But you can see the basket feels the need, the need to hook up, when it’s close enough.
Time for a little tribute I suppose.
-
EMFL - campaigns for EMF
EMFL 4.36.1B
Welcome to this campaigns mod for BMS 4.36.1. It requires the EMF theater to work.
Unzip the file in you (BMS)\Data folder, at the same level as “Add-On emf”
Add the…
Add-On EMFL\Theaterdefinition\EMFL.tdf
… line to your data\Terrdata\theaterdefinition\theater.lst file
This mod contains 3 campaigns, playable from two sides.
Check the EMFL.pdf to know more about them.
Enjoy!
Thank you to the EMF team for letting this happen, and to the BMS team for their work on BMS and fixing it.
From WDP 3.7.18.180: when asked “Mission files belongs to theaters: etc” --> say YES.
Link to download: https://drive.google.com/file/d/1i1KZtcf6x9x5d4AZhyYOiQVfmVAjGF2e/view?usp=sharing.
-
LBalk: theater mod Balkans for 4.37.3
Greetings everyone, thanks to all who participated in refining this mod.
It requires the Balkans theater to work. That is on purpose, and out of respect for the Balkans team.
(https://forum.falcon-bms.com/post/383023)It is compatible with BMS 4.37.3 at this time.
Campaign saves should not be compatible with the previous version.I don’t have time to test extensively everything in the theater. If you experience troubles that seem to be specific to the mod, let me know.
This is version 4.37.3A, 27th of October 2023.
You’ll find the link at the end of the post for the download.Lines to add to your theater.lst file:
Add-On LBalk\Terrdata\theaterdefinition\LBalk-.tdf
Add-On LBalk\Terrdata\theaterdefinition\LBalk+.tdfEnjoy and keep feeding me back!
Check the ReadMe and PDF in the theater folder.
WDP: when asked “Mission files belongs to theaters: etc” –> say YES.
WDP still: If you want WDP to load Balkans map, place your save in the original Balkans campaign folder (just copy the file while you open). When you’re done, retrieve the ini you need in there too.
OR
You can load your mission, choose any flight, then switch map to Balkans, and click “Different flight”. Then choose your real flight. All should go smooth from then.Link to download LBalk :
https://drive.google.com/file/d/175QPLYjInZ8P4cG4NfZKBQ3mqmg6betu/view?usp=sharing -
LKTO 4.36 : theater mod for 4.36.3
Hey fiends, (:P)
This is compatible with BMS 4.36.3
This is LKTO 4.36.3A - Mike and LKTO 4.36.3A + Papa.
15th of September 2022.Campaign saves should be compatible with previous version.
LKTO is installed as an independant theater, but this is a small size zip.
Find the Readme in the Add-On folder, with other useful docs describing the campaigns.
From WDP 3.7.18.180: when asked “Mission files belongs to theaters: etc” –> say YES.
The link to download LKTO
https://drive.google.com/file/d/1FPUkdNrEBJlnFU7Ur6DGgo0YOUgcxsSm/view?usp=sharinghttps://youtube.com/playlist?list=PLOQjcaDRjblkye1WrITdp-QBLb_B3BYzS
-
[VR] "My legs are small and my cockpit is tiny" fix
Thanks to the people who gave tips about that (@VO101_Tom , @SOBO-87)
- Add falcon bms.exe to your non-steam games list in steam. Browse the /bin/x64 folder to find it. And if you don’t want to use a launcher by the way, that’s where BMS is actually launched from. Parameters (-ef, -mono…) work for it too.
- Go find Falcon BMS in your steam list, open the properties, and tick the “Add to VR app” box.
-
Restart Steam.
-
Start BMS, not from Steam, but with your exe itself.
-
Go 3D.
-
Open your SteamVR menu with your left controller (Quest 2 here). Go to Video settings, and enable world scale, or whatever it’s called in English, down the list.
-
This opens a new parameter line (go down a little bit to see it).
If you want to feel like Captain Kirk in USS Viper, try 200%. If you want to have a real world sized F16 cockpit, try 125%. -
Close the VR parameter screen then exit 3D and BMS.
-
Restart BMS and check the result.
-
Don’t change field of view. You’ll just see two pictures instead of one.
-
RE: Santa's wishlist for BMS
Would there be any technically acceptable possibility to add battle background noise to JTAC speech?
-
RE: Units disappear when switching from CCRP to CCIP
@Aragorn said in Units disappear when switching from CCRP to CCIP:
“Like, you can see the chinese wall from space…”
Urban myth…
You can from the ISS, if CCRP enabled and the wall as SPI.
-
RE: Stealth in BMS
There is something to keep in mind: if you want to keep flying in F16s, which may not be your project then, moving the time window towards way too modern technology may not result in a very interesting context. But that’s almost off-topic.