@MailMan said in Radar Cursor freezes:
@airtex2019 It doesn’t matter, it just stopped moving. Cycled through everything. The only way to fix it was to exit and rejoin.
RDR cursor enable?
@MailMan said in Radar Cursor freezes:
@airtex2019 It doesn’t matter, it just stopped moving. Cycled through everything. The only way to fix it was to exit and rejoin.
RDR cursor enable?
@gankailer said in 4.37.3u2 - A-G DL XMIT issues:
@LorikEolmin said in 4.37.3u2 - A-G DL XMIT issues:
Cursor Zero, do you
Sorry, missing step between ICP 0 to change and HSD as SOI. Cursor zero (or TMS down) pressed multiple times.
Cursor zero or TMS down?
@gankailer said in 4.37.3u2 - A-G DL XMIT issues:
Description: When receiving/sending markpoints intra-flight over VHF, the location of the markpoint is not accurate as seen through the TGP, which jumps to an area about 200 meters away from the actual markpoint. However, moving the TGP a little bit will cause the TGP to jump to the area near the actual intended markpoint.
Repro steps:
- Launch Danger Close TE
- Fly to Stpt 6. Set AG DL to own flight via VHF.
- A couple of trucks should be visible directly at steerpoint 6 and a few moving trucks should be visible northeast of the city. Mark them with the following steps:
- ICP 7 (MARK) page, select TGP
- TMS UP when over target once to ground stabilize, another time to mark
- ICP 0 (M-SEL) to change current stpt to latest markpoint
- HSD as SOI
- IFF-IN to transmit data packet
- Upon reception of data by flight member, go to Stpt 71 (or whichever data point was sent)
- Verify that the marked location is not as intended
Please let me know if any additional information is necessary. Thanks!
You don’t Cursor Zero, do you?
@Razor161 said in [BUG] XMT switch should not move:
Version
4.37.3 (x64)Detailed Description
ECM XMT switch moves from position 1 to 2 when cockpit is cold and dark and the throttles is moved from cutoff to afterburner.Reproducibility Procedure
- Enter an F-16 with ECM panel in cockpit.
- Do your preflight checks as usual and verify that the XMT switch is set to 1.
- Before setting main power to BATT or ON move the throttle from the cutoff position to full afterburner and whatch the XMT switch.
- The XMT switch moves from position 1 to position 2 while main power is still off.
Expected Behavior
When cockpit is cold and dark nothing should happen regardless what I do with the throttle.
Doesn’t happen to me.
@Anakin051177 said in EMFL - campaigns for EMF:
@LorikEolmin said in EMFL - campaigns for EMF:
@Anakin051177 said in EMFL - campaigns for EMF:
@LorikEolmin said in EMFL - campaigns for EMF:
EMFL 4.37.3A
22nd of December, 2023Previous campaign saves and TE should be compatible with this version.
Welcome to this campaigns mod for BMS 4.37.3. It requires the EMF theater to work.
Unzip the file in you (BMS)\Data folder, at the same level as “Add-On emf”
Add the…
Add-On EMFL\Theaterdefinition\EMFL.tdf
… line to your data\Terrdata\theaterdefinition\theater.lst file
This mod contains 4 campaigns, playable from two sides.
Check the EMFL.pdf to know more about them.
Enjoy!
Thank you to the EMF team for letting this happen, and to the BMS team for their work on BMS and fixing it.
WDP: when asked “Mission files belongs to theaters: etc” --> say YES.
WDP still: If you want WDP to load EMF map, place your save in the original EMF campaign folder (just copy the file while you open). When you’re done, retrieve the ini you need in there too.
OR
You can load your mission, choose any flight, then switch map to EMF, and click “Different flight”. Then choose your real flight. All should go smooth from then.Link to download:
https://drive.google.com/file/d/1i1KZtcf6x9x5d4AZhyYOiQVfmVAjGF2e/view?usp=sharingHi Lorik. Any help wiht teh below will be much appreciated.
I have been having the same frustrating issue which casues CTD. I fly in VR and in the campaign whenever I am airborne and switch to Com 4 to contact Departure, once I click the mic and speak the word by menas of voice attack, i get CTD. The same happens if I use the keyboard. When I click T for 3 times I get a CTD. I have unisntalled and installed EMF and EMFL nu,erous times. Makes no difference. There haev been instances where it did not CTD but on the way home when I contacted Approach I got a CTD. I am not facign this at Korea theater. Any idea what could be causing this?
Perhaps EMF and EMFL should not have been updated against all odds for 37.3 and should be forgotten.
I apologize as I dont understand what you mean.
Start here?
https://forum.falcon-bms.com/post/387267
@Anakin051177 said in EMFL - campaigns for EMF:
@LorikEolmin said in EMFL - campaigns for EMF:
EMFL 4.37.3A
22nd of December, 2023Previous campaign saves and TE should be compatible with this version.
Welcome to this campaigns mod for BMS 4.37.3. It requires the EMF theater to work.
Unzip the file in you (BMS)\Data folder, at the same level as “Add-On emf”
Add the…
Add-On EMFL\Theaterdefinition\EMFL.tdf
… line to your data\Terrdata\theaterdefinition\theater.lst file
This mod contains 4 campaigns, playable from two sides.
Check the EMFL.pdf to know more about them.
Enjoy!
Thank you to the EMF team for letting this happen, and to the BMS team for their work on BMS and fixing it.
WDP: when asked “Mission files belongs to theaters: etc” --> say YES.
WDP still: If you want WDP to load EMF map, place your save in the original EMF campaign folder (just copy the file while you open). When you’re done, retrieve the ini you need in there too.
OR
You can load your mission, choose any flight, then switch map to EMF, and click “Different flight”. Then choose your real flight. All should go smooth from then.Link to download:
https://drive.google.com/file/d/1i1KZtcf6x9x5d4AZhyYOiQVfmVAjGF2e/view?usp=sharingHi Lorik. Any help wiht teh below will be much appreciated.
I have been having the same frustrating issue which casues CTD. I fly in VR and in the campaign whenever I am airborne and switch to Com 4 to contact Departure, once I click the mic and speak the word by menas of voice attack, i get CTD. The same happens if I use the keyboard. When I click T for 3 times I get a CTD. I have unisntalled and installed EMF and EMFL nu,erous times. Makes no difference. There haev been instances where it did not CTD but on the way home when I contacted Approach I got a CTD. I am not facign this at Korea theater. Any idea what could be causing this?
Perhaps EMF and EMFL should not have been updated against all odds for 37.3 and should be forgotten.
No mention of Enable RDR Cursor?
@Steven said in Best way to attack ZSU-23-4 ?:
I use a self-made TE with one ZSU-23-4 unit as target, clear weather, 9 a.m. There I fly a F-16CM-52. Beyond that, no restrictions.
Then there is no danger above 12,000 ft from ground, use any exploding stuff from there.
@Steven said in Best way to attack ZSU-23-4 ?:
Hello everyone,
I have a question: What is the best way to attack a ZSU-23-4 Base Defense Unit? Which weapon is recommended and in what order the units (1 x Dog Ear, 4 x SA-9, 4 x ZSU-23-4) should be attacked? I find it quite difficult to attack such a unit and would be grateful for any advice.
With which constraint, in what context?
@Icarus said in RWR missile warning for missile tracking another jet.:
So, is there any documentation or posts from devs how this new stuff works in U2 and 3? I have looked and found nothing. Is it confirmed that you can get M and tones on RWR from a missile that is tracking another jet in BMS?
Yes, first hand experience.
@Atlas said in Set up a campaign server. Can it be done?:
@VIPER-0
Do you manually save every hour or is there some way to automate this?
@Atlas said in Set up a campaign server. Can it be done?:
@VIPER-0
Do you manually save every hour or is there some way to automate this?
Technical manual p21
If that bug of having SA-15 hit you 25, 000 ft above the ground was fixed with 4.37, then it must be the reason.
@Anakin051177 said in EMFL - campaigns for EMF:
I got everything cleared up now. Once small hickup.
I selected Double Front, chose Greece adn flying with 521st sq. from Elefsina… Automatic skins of the F16 Bl 52+ CFT belong to sq 343 Star. However when i get in the pit (I am in VR mode) the aircraft if I look to the right or the left, has no wings! I can see the shades of the wings but not the wings themselves.
I suppose this is a bug and watned to report it.
Thanks
N
All good here. I suspect install messing with folders not being respected as written in the original post (suspicions fed by the reading of previous posts here…)
@Skorp Two Weathermapsupdates folder, you switch manually.
@rubbra said in Limits needed on seat height adjustment:
@Stevie The only point I’m trying to make is that there is no limit on the seat adjustment control in VR. I’m delighted that you have a height adjustable seat. I do not (and even if I did, it wouldn’t make any difference, because in BMS, in VR, there is literally no positional adjustment except for the seat, unless you start messing with cockpit cameras which don’t persist between flights). I do, however, move my seat up and down in the aircraft (and in other sims) from time to time to change my angle of view or whatever, depending on what I’m doing. Not by much, but by a bit.
I get you’re not a fan of VR, but some of us are, and this minor thing is a minor bug. If it doesn’t get fixed, meh, it’s not a big deal, but if the devs don’t know it’s there, then they can’t decide about it.
Off topic and irrelevant to your question, that’s an old habit, nothing will change that. Don’t feed.
@Dee-Jay said in Possible intra-flight comm issue:
@Icarus said in Possible intra-flight comm issue:
Doesn’t 4 become 2 when 2and 3 are downed?
Nope. Its callsing, D/L Ids, A-A Tac … doesn’t change. Fortunately
A/A Tacans slide between flights when aircraft leave 3D. Maybe not intraflight, but definitely intrapackage last time I checked (nothing in the logs about it).
I’m not even sure D/L stick.
@AviationPlus said in Local Server hosting login with local client but no one can hear me on IVC while in 3D:
@Micro_440th Also forcing CS to the local client is necessary before anyone will be able to hear the client in IVC.
I don’t do it.