Great! Doesn’t get much easier than that. Kudos again for the excellent and easy to use Profile.
Posts made by Macman
-
RE: Fish's Voice Attack for BMS...
-
RE: Fish's Voice Attack for BMS...
Fish - Thanks for your Voice Attack profile - working great for me. One question on the .data file setup? I have 3 monitors, overall 5760-1080 total screen size. For the dialog boxes, they pop up in the far left screen. Bit tight on the old neck always looking over.
I saw the notes in your Voice Attack profile about re-setting the location of the dialog boxes, but am unclear which settings you would change, and where you would change these? Can you provide any clarity please for those who may run triple monitors
? Thanks. -
RE: AAR Practice
@b0bl00i - Thanks for the tip here. I had the same problem, now eager to try AAR.
-
RE: Does anyone use Elgato Stream Deck XL Advanced Stream Control . Thinking about getting one
Thanks for the reply. As usual, I commented before I opened the txt file in your download. I’ll have a go at it this weekend.
-
RE: Does anyone use Elgato Stream Deck XL Advanced Stream Control . Thinking about getting one
Max - Thanks for your Streamdeck profile. Are there any special instructions on how to use this, or do we just import your file from the download?
I ask as there was another posting where the author mentioned adding a .key file to the Falcon BMS.cfg file so that the program would recognize the new controller. A bit confusing to me. I just want to add this without any regrets/problems to my original Falcon BMS program.
Thanks.
-
RE: Stream Deck profile for BMS
I saw your posting for Streamdeck for BMS. Can you detail how you installed this into BMS, specifically how Falcon BMS recognizes this controller. Also, would you be able to share your profile? Thanks.
-
RE: Streamdeck profil Falcon BMS 4.35
Nice Streamdeck profile. One question, exactly where do we place the .key file?
-
RE: FPS impact of 4.35
Arty - I have 3 monitors too. Is it possible you can provide your Graphics settings? I’ve got an Nvidia card, older system and great GPU - graphics are just so-so, but I’m happy to have 3 monitors running at least. Thanks.
-
RE: Problems setting up TM Warthog
Tailfin - Thanks for the advice. Kept joystick controller highlighted and changed throttle and rudder settings within the Advanced Settings Page. Finally - now I can get on to starting the training process and enjoying this sim.
-
RE: Problems setting up TM Warthog
Tailfin. One last question. When I adjust the throttle and pedals, (in the advanced menu), do I have to change the highlighted area on the controller page from joystick to throttle (make adjustments in advanced settings), then change highlighted area on controller page to pedals (make adjustments), then save? Or do I just made all of the modifications in the advanced menu with the joystick highlighted on the controller page? Hope this makes sense.
-
RE: Problems setting up TM Warthog
I’ve been having the same issues. I’ve checked the Manual and verified the order of my controllers in the DeviceSorting.txt. file. I tried to use some other TARGET profiles, but was not fully able to modify some keys. I went back to the BMS manual, which recommended just using the controllers outside of Target. This was great, and I was easily able to quickly setup my buttons/keys. Problem is that either the joystick won’t work, or the throttle won’t work. Once I go into the settings and re-verify, then the other controller doesn’t work. In settings page, everything looks good and all the settings seem correct.
I may just re-download the game and start from scratch. -
RE: Perhaps A novel Warthog profile Using the T.A.R.G.E.T. Software?
Lawrence - This profile works well in 4.33U1. Been having some issues with other TARGET setups with a a .tmc extension. This has the .fcf extension and it’ll be much easier to modify, f needed. I’ve even got the Thrustmaster MFD’s tucked away in a closet somewhere - I’ll pull them out and use them as they are already in your profile. Great job, thanks for sharing.
-
RE: Mud's Profile
Mud - One more question, your TARGET file has a .tmc extension, however my TARGET can only edit files with an .fcf extension. I can run your file in the game, but cannot access it through TARGET to edit it. Any ideas?
-
RE: Mud's Profile
Mud - Thanks for the profile. First time I’ve got my joystick to work in a week. I’m just getting initially setup and the joystick stuff was a bit overwhelming. One question for you, if I’d like to change a few of the commands, is it better for me to do it through the TARGET software, or within the game keystroke settings?
-
RE: Begging for help, ready to give up.
I just got back into this sim, after flying FSX. I have a triple monitor setup running eyefinity and Track IR 5. I was having the exact same problems, pretty much going crazy trying to find solutions . I was only able to modify the default and max FOV lines in the BMS.cfg file, following recommendations from earlier posts. I put the FOV at 130 each, no change. I put default at 130 and max at 140, no change. Out of frustration, I put both FOV settings to 140 and bingo, my view looks great. I think there was an earlier post about having to put the FOV higher than 130. Worked for me.
-
RE: Nooby - Warthog Question
Hoover - I tried yesterday to use the joystick independently and not use Target - Falcon did not recognize that I had a joystick connected. Everything was in keyboard mode only. I’ll check into it more this weekend as I feel like I’m taking a somewhat helter-skelter approach to my setup, you know, try this, try that, etc… Sub101 - if you could send me your profile and keyfile, that would be a much appreciated head start for me.
-
RE: Nooby - Warthog Question
That’s exactly what I want. I’ll try it. Sub101 - do you remember the keystrokes you programmed for this button - to do the layering?
-
RE: Nooby - Warthog Question
Thanks for the assistance. I’ll try to use Stubbies recommendation as I’ve already spend considerable time programming the keystrokes through TARGET. I’ll try to figure out the BOAT switch to enable shift layering for multiple uses of buttons for NAV, A/G and A/A modes. I’d prefer to do this and keep things simple. If problems arise, I’ll check into using another’s profile (like MUD) and use the key editor. As an aside, I did play this game years ago. Switched to FSX. Now back to Falcon BSM due to the campaign action and dynamic AI. Here we go again on the learning curve - should be fun though.