got some pic of my new chair lol
Posts made by Minrah
-
RE: Right mouse click for FOV and flight stick/hand throttle.
yeah that worked, tho I need the POV to work on the “3” view
-
RE: Right mouse click for FOV and flight stick/hand throttle.
updated with more info.
-
RE: Need help with throttle POV
ok so I got ahold of CH products and told me to remove the pro manager and use the windows 10 calibration. which I did. I still have issues with the POV inside the sim. while im inside the cockpit I cant move my mouse by right clicking tho when I press 0 to go external I can use the mouse to look around /shrug. not a clue on how I can go forward with this. I will keep trying to figure this out.
-
RE: Need help with throttle POV
update: I think the pro manager is a dead stick or something with windows is making it mess up. dont know if I should roll back on a later version of it to see if it will work. I run it without the manager and it works fine only thing is that my second POV on the hand throttle will not work nor do i think i can change it. I like the CH product just wish I could figure this out. =/
-
RE: Help needed with install
if you’re on windows 10 run it as administrator and make sure your drive has enough space, sometimes it will say that it doesnt which in fact you will.
-
RE: Need help with throttle POV
ok I got it working lol after some trial and error. I had to “download” the profile for it to work and I had to unselect the POV button on both flight stick and throttle then set it to DX Mode. I notice that once I hit the download button both my throttle and stick lock up and become unresponsive. Not sure if running it in admin will help but im doing so for now, for the POV the rotate up down left right…ect dont seem to be working but all my keys on my hotas are. any help would be helpful
-
Need help with throttle POV
I have the CH throttle and fighterstick and they work awesome and I have everything set up but the POV on the throttle wont work, I have the POV selected and watched vids to try and make it work, Ive tired deselecting the POV and still bms wont see the key movments, if anyone knows how to use this it would be awesome!
also anyone know how to have right click on the mouse to move the camera inside?
-
Right mouse click for FOV and flight stick/hand throttle.
need some help getting that working if anyone willing.
Version
4.34.0 (x64)Build
19631Detailed Description
POV buttons do not work on keyboard or on flight stick. flight stick I have are the CH products flight stick and pro throttle.Pictures
Example files
N/ACrash logs
N/AReproducibility Procedure
key bind POV up down left right to keys on keyboard and or flight stick.Expected Behavior
movement of view inside cockpit. -
Hand throttle possible bug
reason why I say possible im not 100% sure if its on my side or not.
Version
4.34.0 (x64)Build
19631Detailed Description
the HOTAS i have is a Saitek X52, now I tested the Idle cut off option both on and off in the config option on start up of falcon. the odd thing is that when I have it enabled the FTIT goes over 800 degrees with out me giving any gas when the sec light goes out. when I have the idle cutoff disabled, it stays at 20 idle power like it should and doesnt over heat but I no action of my throttle even when i set the idle. I followed and read the 3.5.3 HOT START section of the new Manuel and im not ruling out that ive done something wrong. Im super excited with this new update and on top of it I got a head tracker, the amount of excitement i have I can barely hold it in. you guys did a awesome job with this and I just wanna thank you for doing an amazing job!Pictures
NoneExample files
noneCrash logs
noneReproducibility Procedure
electric panel : PWR = MAX PWR
ENG Feed = Norm
Air Source = Norm
…ect
Expected Behavior -
RE: Request to make pits for none combat planes
non combat missions!? What kinda sim do you think this is lol.
lol I know I know, was wondering if like flights for the fuel tanker can be done and have more controls and a real virtual pit for it, my father wanted to check out the sim but doesnt want to do combat, hes more into doing none combat flights. I was thinking it might bring more people in and have more of a variety of things to do like flying AWACS or something or fuel tankers, I know its a long shot and it would take alot of time to do but it never hurts to ask right
-
Request to make pits for none combat planes
hey was wondering if it would be possible to make the virtual pits for the globe master and the other jumbo planes and able to do missions with them like to transfer ammo to other airports and such.
-
RE: Problems getting engine to start
wait till 20%rpm, then push throttle about 15% forward then click the clutch after that push the throttle forward and it should turn over. If you still have this problem theres a option in the configure option on start up that allows you to disable that clutch option if you want.
-
RE: Bad timing with tankers
thanks Kutterro that seem to do the trick thank you!
-
Bad timing with tankers
ok so going to make a post about this to see if anyone else having this issue or not, im trying to frag a flight with tankers and I always get “bad timing” message, now heres the thing there are no flights being made and I set the TOT about 20 mins out and even when i set the TOT a day ahead I still have the message, has anyone else experienced this and if so have you found a work around? I would really like to frag flights with tankers to have that refueling element to it
-
RE: Joining in on line game
hey bullet thanks for making a post, I know its not easy putting ur foot out there and asking for help, I am more then willing to give you a hand with anything I can do if you need help with the 18’s i hope I can see you on a TE on the VG servers
-
RE: Configuring Saitek X52 pro mini stick (mouse) for radar cursor
try what works for you
-
RE: BMS 4.33
also welcome to 4.33 get ready for your jaw to drop
Edit by mod: please don’t share alternative methods for download
side note Thanks for the edit, I wasnt aware of what was going on as I just now read about whats going on, sorry for any trouble that I have made.