The slew button seems very sensitive to inwards pressure… I’m guessing thats what is going wrong, my trainer is going to fly the cavok training mission with me tonight and we will go through it.
Latest posts made by OldAim
-
RE: A Guide to Morphine’s Profile for BMS 4.33 and Beyond
-
RE: A Guide to Morphine’s Profile for BMS 4.33 and Beyond
I really appreciate the feedback… I am about three quarters through my training for the 185th and this issue is driving me mad. I will reload that mission and follow your advice and report back. Many thanks Aim
-
RE: A Guide to Morphine’s Profile for BMS 4.33 and Beyond
Thanks I appreciate the quick response… I have used the training mission Cavok as a way of boresighting… I made a short video of my attempts, I’m sure its not me… Have you heard of any glitches that could cause this? Here is a link to the video I made
https://www.dropbox.com/s/5lxf3c07xcah6nn/falcon%20bms.exe%2012.04.2017%20-%2022.27.16.01.mp4?dl=0
-
RE: A Guide to Morphine’s Profile for BMS 4.33 and Beyond
It’s good to see someone keeping Morphines going well done….
I have this unusual problem particularry using Mavericks and also boresighting them via the TGP, the TMS up button seems very hit n miss… All other munitions it works fine, locks up great in AA FCR and AG FCR, using LGB’s it fine, I get IR point after ground stabilising… The issue is using Mavs on their own, I am TMS ing up like a loon to get a lock, sometimes the lock only appears at 4-5 miles… I have also tried boresighting them via the TGP, I get all sorts of issues, pages not being SOI when they should, lots of issues getting an IR Point, multiple tries etc… I love the Warthogs but this one area is causing a lot of frustration… Anyone have any ideas? I have been through the sorting .txt and all is as it should be. I am running windows 7 64 bit…
-
RE: Mud's Profile
I have tried again and changed the hotkey for team speak to ALT+V, thats Mic switch down… When I am in teamspeak and I click the Mic hatswitch down the transmit light flashes but then goes out, it doesn’t seem to toggle… Any ideas?
Just another quick question, I have only had the Warthogs three weeks and still trying to memorise all the presses etc, I keep hitting the chaff/flare by mistake with my thumb moves down lol
I am training at the moment and having a real problem slewing the cursor to the targets, could you explain the Slew control please, on the diagram it says
Short –-- Radar cursor reset
Long---- Radar cursor enable
Am I right in thinking that to be able to slew I have to press the button in for a long time, that then activates the slew function? If I hold it in for a short time it will reset to the middle of the FCR? If so I think I may be pressing it in by mistake as I am slewing around, I am not doing well with Mavericks due of this…
Regards
Aim
-
RE: Mud's Profile
ah, cool thank you, Numlock was suggested as the hot key for Team speak as it serves no function on BMS, I will amend the tmc file I have been playing with, rename it and drop it into /user/config, then load it up on TARGET to see what happens, if it doesn’t work I will revert back to the file that does work with the Mic switch down ALT+V you kindly done for me Mud and keep trying til I crack it, I need to be self sufficient on this as I have no doubt further down the line, more personal changes will be needed and I need to do those myself, not keep relying on you, I am sure you are busy enough.
I do thank you for your replies and help I do think its a great profile….
AIM
-
RE: Mud's Profile
I tried it and it didn’t
I have reloaded the previous file for now…
Aim
-
RE: Mud's Profile
I have made the alterations… Are they correct now?
//Mic Switch
MapKey(&Throttle, MSU, USB[0x83]); // Teamspeak
MapKey(&Throttle, MSR, DX21); //Com 1 Transmit
MapKey(&Throttle, MSL, DX20); //Com 2 Transmit
MapKey(&Throttle, MSD, PULSE+L_ALT+USB[0x19]);Regards
Aim
-
RE: Mud's Profile
I am sure I will get my head round it soon… Thanks for the correction Mud I will pop that line in and see how I get on.
Once again many thanks for your time.
Aim
-
RE: Mud's Profile
Hi again Mud, I noticed (should have looked first) that this issue came up before and you as always you had a fix
"Ah yes!
They should actually not be turned off, but I forgot to adjust the value in my last version upload.
Anyway, easy to set yourself. There’s two ways:
- Edit the script:
Look for (line 342)
Code:
//*************************
//*** TM Cougar MFD’s ***
//*************************ActKey(PULSE+KEYON+LED(&LMFD, LED_INTENSITY, 0)); //set left MFD backlight power to desired number (0-255)
ActKey(PULSE+KEYON+LED(&RMFD, LED_INTENSITY, 0)); //set right MFD backlight power to desired number (0-255)
And change the 0 to any value between 0 and 255. 255 being the brightest setting."I made the suggested changes and am now looking at bright LED’s on my MFD’s….
SO I just need to get the right syntax for assigning mic switch up to numlock…
My attempt failed
//Mic Switch
MapKey(&Throttle, MSU, DX83); // Teamspeak
MapKey(&Throttle, MSR, DX21); //Com 1 Transmit
MapKey(&Throttle, MSL, DX20); //Com 2 Transmit
MapKey(&Throttle, MSD, PULSE+L_ALT+USB[0x19]);is 83 the right code for Numlock or did I get something else wrong?
Regards
Aim