I installed BMS 4.34 and after a few days the launch option is disabled.
I have re-installed but is still does not allow me to launch the sim.
The original Falcon4.0 is installed on my system.
Any advise?
Latest posts made by p.j.m.janssen
-
Launch option is disabled in launcher
-
RE: Falcon MFD Software for android tablets
Hi,
When I try to run the installer for the server I get a positive virus warning.
Is this file infected or should I turn of the virus scanner?Regards,
Vulture. -
RE: Solved. BMS & Helios probelems.
Problem solved.
Before changing the monitor configuration first change the falcon interface.
@Ice it works using two touchscreens. I am using one for the profile and the other for monitoring my system. If you have a profile which uses 2 screens let me know.
-
RE: Solved. BMS & Helios probelems.
yes, both Helios and BMS are using the same keyfile. I am using 2 touchscreens, could that be the problem?
-
RE: Solved. BMS & Helios probelems.
Hi Ice,
Yes, the touchscreen is working outside Helios, it even works within Helios when I touch a button I can see and hear that mouse pointer in BMS perform a click but nothing happens.
btw had the same issue with Window 7 U64.
-
Solved. BMS & Helios probelems.
Hi Guys,
I have installed BMS 4.32
BMS does not react when I touch the buttons on my touchscreen.
I am using Toto’s profile and key file.
Strange thing is I installed the same software on my laptop, attached the touchscreen and ‘Voila’ it worked out of the box.
I have re-installed Windows 10, installed BMS and Helios but no joy.
It’s driving me crazy.Hope someone can help me out on this.
Regards,
Vulture. -
RE: Possible 3-monitor config?
Hi Guys,
If you want to use a multiple monitor setup with different sizes you should try SoftTH.
This works great. I am using it in a six screen setup. -
RE: BMS 4.32 SoftTH
Hello,
what configuration do you use to run softth with BMS?
I have black screen when I launch BMS+softth, I’m using the 2.01
thx
I use 2.06. Put the d3d9.dll and config.SoftTHconfig into Bin/x86
This is my config file
[main]
renderResolution=3840x2148
nonlocalFormat=RGB32D
keepComposition=0
smoothing=1
debugD3D=0
zClear=1
vsync=0
tripleBuffer=0
screenshotFormat=jpg
dllPathD3D9=auto
dllPathDXGI=auto
dllPathD3D11=auto[overrides]
forceResolution=0
antialiasing=0
processAffinity=1
FOVForceHorizontal=0
FOVForceVertical=0[head_primary]
screenMode=3840x1024
sourceRect=0,0,3840,1024[head_1]
; Autodetected as \.\DISPLAY2 at NVIDIA GeForce GTX 460
devID=1
sourceRect=0,1124,3840,1024transportResolution=3840x1024
transportMethod=local
noSync=0As you can see I am using just one video card.
Each row of screens is connected to a Matrox Triplehead, but you can use any amount of video card and screens.
The Tripleheads do the horizontal bezel management, SoftTH does the vertical bezel management.Works like a charm for me.:D
-
RE: BMS 4.32 SoftTH
Im running 3 monitors in eyefinity at 5760 x 1080 and its amazing, still trying to figure out some FOV issues, such as looking down at my side panels in the cockpit. It doesn’t seems to be a problem running at 1920x1080, only when in eyefinity. Any suggestions…?
There is a thread on this forum about eyefinity and I read something about setting the vertical FOV.
-
RE: BMS 4.32 SoftTH
@Cpt:
I too want to get the 3 screen thing running. love that Idea! would love to see how anyone gets on with that…
post here if you have this setup and dont mind sharing.
Use this link: [http://www.kegetys.net/forum/index.php?board=1.0
F](http://www.kegetys.net/forum/index.php?board=1.0)ollow the instructions.
Read this forum about the FOV.
It is realy a piece of cake.Suc6,
PJGS.