@Raptor-One Thanks it work s for me for BMS 4.37 update 2 except for the view 2
Latest posts made by Sagal
-
RE: HUD only view zoomed in to FOV 30 on 4.36.2
-
RE: Problem with devicesorting.txt
@airtex2019 You pointed me to the good direction. I’m now launching BMS the old way (from bin/x64) and the problem is fixed. Another point with the AL was that each time even by reloading the saved key folder I had to go to advanced settings and reenter all the settings of the rudder (axis, left brake, right brake etc).
-
RE: Problem with devicesorting.txt
@Ulti said in Problem with devicesorting.txt:
@SemlerPDX Same problem here with 4.37, no AL just Devicesorting.txt keep overwritten even when i set it to Read Only
Just no way for me to work with this… hope the problem can be solvedSame here with BMS 4.37 update2
W11 pro, launching without administrator right
What I notice is that even with read only activated, as soon as I exit, the file is modified to the sequence of my current active controller sequence (as visible from Game Controller). Problem being in addition, that this sequence after a restart of the PC is not fixed either and can change. Even a backup and a storage of the file in another drive therefore is not fixing the issueMaybe one solution (I will come back if it doesn’t work) is in the security tab of the properties to deny all modifications to the point that later on I cannot even open this file! (but I have a backup anyway). This leads as well when launching to a message of: “error log saved to …/Launcher_Log.txt” that I ignore and the game/sim is launching anyway
That doesn’t solve the issue as I have to restart settings the controller in the game and the TM MFD… -
RE: My BMS 4.35 Impression.
I’m having a great time with 4.35…Thank you so much to all the team! My impressions so far:-
As an aside I’m getting a constant ctd at the same time with the Long Travel TE. Its after tanking and when the escort commences to engage the enemy CAP. I have edited all RedAir out as a trial and found no issues. I’m still investigating to narrow down the culprits.
Regards
Dram.I am having CTD on the two first training missions. On the first one: 4 in total so basically each time I fly after various time but approx 10 to 25mn and on my first training mission and on 2nd training mission: one after 20 mn. It is a pity…I have nothing saved anywhere that I can find for any explanation. It is more a kind of return to desktop: a second earlier I’m in BMS 4.35 and the second later in my desktop…
I report on this file as I searched for CTD and return to desktop…I have just reported there
https://bmsbugs.blu3wolf.com/view.php?id=57
. -
RE: Some issues with 3D surround
Yes PutYawa, it is also my understanding. I could disable SLI and run 3D on one monitor but I don’t see the point…I prefer 3 monitors withoud 3D in this case.
I have just notice one piece on information from Nvidia latest drivers dated May 2019 (not on the drivers that I use as I have the February’s one):
Following the posting of the final driver from Release 418 on April 11, 2019 GeForce Game Ready Drivers will no longer support NVIDIA 3D Vision or systems utilizing mobile Kepler-series GPUs. Critical security updates will be available for these products through April 2020. A complete list of Kepler-series GeForce GPUs can be found here. -
RE: Some issues with 3D surround
No I am only talking of 3D Nvidia surround (not just 3D as I am not interested in testing 3D on only one screen, as 3D surround is working for example with DCS) and due to my config I need to use SLI as I cannot connect 3 screens with only one of my GC.
Once Nvidia 3D surround is activated, BMS 4.34 UI turns to a black screen on the main monitor with nothing clickable. For me it is due to the coding of the UI that is not adapting to the original screen resolution (something that maybe could have been fixed years ago, but maybe it is too difficult to fix) -
RE: Some issues with 3D surround
I have to say that I would very much like that the UI could be changed and not code-blocked so that it is compatible to the game resolution…
I noticed yesterday that even activating/creating a new NVI profile and modifying some settings is sufficient to have an UI distorted and for me not being able to proceed further with the simulator (no access to anything). I had to delete the NVI profile
In fact even with the previous version I was active on: 4.32 I think that I was managing to have it worked (3D surround) with a lot of difficult but it was most probably on the 32bit exe. -
RE: Some issues with 3D surround
Thanks for the feedback. No I didn’t use only one GPU without SLI but even if it was working what would be the point? With only one card connected the way they are connected to my screens (I cannot connect a single card to my triple screen setup) I would only enjoy 3D on one screen which is a no go.
If this was only a problem with SLI I wouldn’t have 3D surround in DCS M2000C Nevada map would I (I have just rechecked today)? Last time I checked 3D surround was also working well with Asseto Corsa, Dirt Rally etc.
So it is for me a specific issue with BMS 4.34 and my config.
My Nvidia drivers are 419.17 whql -
RE: Some issues with 3D surround
Back to the issue (not that the previous one was solved, it was still there: accessing by being persistent). Same config than on my first post, this time with BMS 4.34 and with the Nvidia drivers of February 2019.
Everything is fine without 3D
With 3D Surround on, I have only very briefly a distorted image of the owner logo, then a blackish center screen with the in game music on. I can only move my mouse cursor in the center screen (out of 3) and as I cannot see the UI screen I cannot progress further and the only way out is ctrl+alt+del and forcing the shut down from BMS
I tried windowed mode, deleting the dx9 file, deleting any Falcon profile from NVInspector, creating a new one with no settings actived, with Vsync on or off from the game, activating 3D from a pause game, etc. (everything I could find in the forum). Nothing is working.
I am always installing my Nvidia drivers the cleanest way possible (searching from any traces of the previous ones and cleaning with ccleanear before installing the new ones) so the issue is probably not coming from that part.
Any idea? -
RE: Balkans 4.33 Update 3.6
I have a bug to report with pilot body and legs setup. When I edit in "Add-On Balkans/Art/ckptart/F-16CM-40/3dckpit.dat’ and for cockpitmodel2 the default parameters 3089 by the parameter 2797 (which is the one to use according to the readme), I have effectively the body and leg of the pilot but I lose the functionality of the needles of many instruments (not visible anymore). By reverting the parameter number it works again. Any fix for having pilot body and leg working?