Wow, this is going to be great fun to fly. Thanks to you and all the contributors who brought this to fruition.
Posts made by Sarge55
-
RE: Iran 128 for BMS 4.37U3.1
-
RE: AAR Refuelling Duration.
Probably that’s the most it can get off the ground with.
-
RE: Nordic Theater 4.37
Sweet. Thanks for this theater, it’s fantastic I love flying it.
-
RE: Selective Jettison not working
@MaxWaldorf
Gone through the manuals and didn’t see an SJ chapter/section.Can you give me a hint which Manual?
-
RE: Cougar's condition…...and thanks for your support
All the best to you and your family.
-
RE: AXIS SHAPING FEATURE?
I have been using the DeltaSim upgrade for some time now and didn’t need to change the slew speed. Although I do also use Morphine’s profile which may have some axis tuning built in.
In another thread I saw a config addition by “Hoover” which you add to the BMS Config file which allows you to adjust the speed.
I’ll look for it and add a link when I find it.
-
RE: Lack of power to HTS to get the HAD work
Then I would say when you modded the Norwegian F16 to add HARMS and HTS the hard points were not properly ID’d. That is way above my pay grade so I cannot assist with a modding question.
-
RE: Lack of power to HTS to get the HAD work
Then that is the problem. I power both hard points as a matter of rote even if I don’t have a pod mounted. I don’t know if that is ill advised IRL but it seems to be fine in BMS.
-
RE: Lack of power to HTS to get the HAD work
You don’t mention it above so I have to ask did you power the left hard point during start up?
-
RE: Triple Buffering
For me, that was an excellent analogy. Graphics has always been a bit of “Black Magic” to me but I understood that. Thanks
-
RE: 4.35 U1 rewrites your RTTClient.ini settings.
Be advised, keep a copy of your coordinates.
LOL… Too late but thanks. Got it sorted after an quick reread of the manual.
-
RE: F4 BMS 4.35 and Display extraction with RTTConfig
Great tool, thanks.
Is it possible to add the HSI to the list of exports? My old eyes need the seniors version on the second screen…
-
RE: How to reach 60Fps on MFD extraction by RTT ?
thunder888
You may wish to add how you fixed your issue to assist others who may be searching the Forum for a solution to their MFDE problem.
-
RE: [BUG FIXED] RTT Remote - Freezing
I jumped into the HARM training mission and within 5 min the MFD’s locked up. I tried it with just MFDE running and with the RTT client and it locked up within the 5 minutes in both cases.
I then did a 40 min. mission in a 4.35 campaign and had no MFD freeze up.
Are the training missions still 4.34?
-
RE: [BUG FIXED] RTT Remote - Freezing
As a follow up to my earlier post.
I tested in both a new 4.35 TE and a new 4.35 Campaign and didn’t have any freeze ups using just MFDE (no RTT client running) with the three recommended lines from Zipgun (noted above) in my config file. Or, if you run just RTT extraction only (no MFDE) say for the MFD’s and DED then no freezing.
If you run RTT and MFDE at the same time you get the freezes, which is what I (up to now) usually did. RTT for the MFD’s and DED and MFDE for the other gauges. (This was to deal with export issues when flying the Mirage awhile ago IIRC.)
I’m going to put in a few more flights to confirm.
I was flying F-16CM-52
-
RE: [BUG FIXED] RTT Remote - Freezing
The exported MFD’s are freezing every time for me. They start off great, then in 10 or so minutes they freeze, usually just after taking off.
I tried only extracting the MFD’s using RTT and the rest of the gauges etc. are done by MFDE. The MFD’s freeze but the rest of the gauges works fine. Then I tried extracting the MFD’s by MFDE they froze up after approximately the same time yet the rest of the gauges continued to work.
I tested in a new campaign and a training mission. I’ll try a TE next.
-
RE: Falcon MFD Software for android tablets
MFDE is working for me with the exception of the MFD’s. It extracts the MFD’s fine when you have “set g_bDoubleRTTResolution 1” as Zipgun says however they seemed to freeze after a minute or so (well twice before I switched to RTT method).
With the MFD’s extracted via RTT I haven’t had them freeze up, yet. I wasn’t on too long, only about 15 minutes in Instant Action testing controls etc. So hardly an exhaustive test…
Update: Seems it freezes every time now after about 10-15 or so minutes. Typically it’s just after I get airborne either from a ramp start or a taxiway start.
-
RE: BMS 4.35 trailer
This is awesome guys. Thanks.
A Christmas toast to the Devs is in order, perhaps two… :drink: