I like to have that link… I have the same issue as sars.
I would like to make iraq
I like to have that link… I have the same issue as sars.
I would like to make iraq
Okay thx… when it happen again I Will trY your solution…I personaly thought it was that I used too much alt tab during the game
hello,
for some reason my 2 screens in the cockpit of the f16 turns blank without beeing hit or did click on some thing.
and also for some reason when i restart the mission the textures of the runway and taxiways are flickering.
on takeoff it did not flicker at all only when i was landing
hello , i have a question about mission commander
when i want to add a battalion i cant because the apply button is not visible
see screen shot i dont have a big screen for my pc i run at 1280:1024
but all other screens and menu’s i can see and use but this one i cant.
is there a way to resize it?
beter view of the problem :
thx for your time to explain
the red line is also some temp of my cpu but most of the time even when the cores are up to 62 degrees celsius
this is then around 52 degrees celsius but some times it goes to allmost 72 degrees celsius. is this the max tj temps??
well my gpu is a older vid card then yours… its a asus 460 gt direct cu top < better pipeline , better cooling , higher amount of mhz/ghz then the stock 460 gt
may because i use a antec skeleton case <250 mm fan that cools my heat pipes from my gpu keeps my mobo/ram memory cooler
but my vid temps most games are very low arma 3 52 degrees celsius. with frame rate locked at 60.
FSX 32 degrees celsius only at some airports like amsterdam-schiphol it go’s up to 42 degrees.
falcon 4 bms 52 degrees celsius.
some times when i pause the sim. and go alt tab i see that my core temps are 62-65 degrees but not all of the times i alt tab some times its in the same mission 52 degrees and at the red line i see the tems some times at 58 degrees celsius but also as with the core temps some times in the same mission its 48 degrees celsius.
this is not what i see with games like arma 3 or dying light, thats stable around 55 degrees <at the=“” red=“” line=“” in=“” my=“” pic=“”>but this i also see with FSX so running in directx10 mode
so i think your right that this is a problem with older engines with our i7 technogly
but about the core load … yes sometimes i see its running one 1 core with some load on the hyper threaded cores and the other 3 main cores.
some times i see the 4 main cores with the 4 hyper threaded cores a load around 60 % it switches alot…
no stable cpu use with older games on i7.
but besides the temps the sim is running great, locked at 60 fps and using nvidia inspector to force some options.
manos do you know about how to edit some aircraft in bms 4.33?
i fly with the dutch f-16 am or in real life the f-16 mlu with the mlu the f-16 block 15 are updated with block 52 avionics and pod options.
i cant select hts pod for the f-16 am but in real life the dutch f-16’s can use those pods. so they can use the full function of the harm missile
i like to change that.
also with the nevada theatre i still can’t select any comms i hear AI aircraft gets full instructions i only hear my callsign like viper-2
well i have flown my campaign… the indian springs runway disapears and the f-16 is sunk in to the ground at some places at the airbase
but its a little hardcore most squadrons are shot out of the sky from the sa 17 and sa 5 and 6.
yeah i need to work more on it but this was my first try to make a campaign.
i am used to edit lot of games/sims but falcon 4 bms well its harder then most games to edit.
ps. does somebody know where i can find the proper tower freq for airbases in falcon bms?</at>
manos 1981 question i see you also got a i7 cpu… i have not a great i7 the 860 2,8ghz
but my question is all other games including arma 3 i run at 50 to 55 degrees celsius but falcon bms 4.33 it runs at 62 degrees celsius.
and for my temp readings i have 4 cores and a main temp where my cpu cooler is running on… is that the case temp that cant be higher then 72 degrees celsius?
on topic :
manos1981 i made my own campaign that thing worked like a charm…
around 40 squadrons. with lots of sa 17 and sa 5 sam threats , tankers, awac, i added area 51/groom lake. that also worked.
the only thing i cant get working besides the comm is the campaign button to change to my campaign name.
i did not change a thing to “converted” it to bms 4.33
just installed and change the campaign.
http://www.mediafire.com/download/9qbrcarcmmq7hm0/my+campaign.rar - my campaign
well its version 1 i believe to have read inside the game theatre switcher.
i just googled falcon 4 bms nevada and that is what i get i was not lookin for torrent kind of downloads. just if there are some free maps.
well it works but not correctly when i am at indian springs and ask for taxi i get the comment from the tower to contact the tower when i am 30 miles out…
and the trees at runways and and gras.
i just created a new campaign for this version of nevada… but i cant find the file where the campaign button text are located so for the first 2 times i did not have the right campaign selected.
so i will try it right now with the good one.
https://www.google.nl/?gws_rd=ssl#q=falcon+4+bms+nevada
then the 4th link
http://www.foinikas.org/ftp/public/Falcon%20BMS/Theaters/ this is the 4th link there is a nevada bms version there on his ftp server
hello guys,
i cant get dem2terrain to work
also i dont know what kind of dem file i need to use for dem2terrain.
1arc or 3arc or combined arc, or all other kind of dem files there is out there.
greetings seiran
hi guys,
i last made a mission starting from indian springs af base
on the taxi way and runways are lots of trees its like if the airbase is inside a jungle.
only when i set the trees slider on 0 i only got some grass or small bushes on taxi ways and runways.
but if the slider is on recomended or default. i got the trees allmost every where.
i saw they made for the balkans theatre a tree fix.
is there also one for nevada theatre?
And the problem is?
the problem is that falcon 4.0 bms 4.32 looks crappy and more like falcon 4.0 allied force on those settings!
and why can i run games much more heavyer for cpu and gpu at high to max setting and falcon 4.0 BMS all most on low graphics.
and still stay below 40 degrees celsius and falcon on high running towards 60 degrees celsius a some peaks.
then i go to menu screens they are too heavy with no 3d animation… look for instance at the main menu of tomber raider 2013… thats more heavyer on pc but no heat issue’s
look at the plain old 1 picture menu of falcon and it makes not only my pc running hot bot i read in more forums and clan sites about this issue!
so whats why i ask what did you guys do with the menu’s in compaire with the stock falcon 4.0 or even the lame free falcon version or open falcon…
i tryed them all but BMS is the only one thats giving cpu’s in plain old menu some heat issue’s stress load.
i want to can run my game at main menu for a whole day with out issue’s
BUT GPU stays below 40 degrees celsius at all times…
@Nizmo:
On the hardware side……
Your AMD CPU runs hot, they all do. Its how they work.
Real question is, regardless of CPU temp, whats your GPU framerate?
If your GPU isnt up to par, it will load off anything it cant handle to the CPU.
Just my 2 cents.
invidia inspector locked on 60 frames per second,
and my amd cpu is otherwise not running hot… it stays below 42 degrees celsius in other more heavyer games then falcon 4.0 bms.
cpu using much at UI near 60 % and during flight not more then 28 % with peaks at 35 %
1 thing more the cpu temps drops back when its in flight… strangly because my pc is more at work then at ui.
so with the game and all of the 3d its nothing wrong !!
but still it concerns me when i want to build missions and testing new campaigns etc…
well my amd phennom II x 3 720 is other wise cold…
i have a antec skeleton as system tray… with a big 250 mm big boy fan… on top.
so it cools my mobo, my heatpipes off my asus gtx 460 direct cu top <runs 10-15=“” %=“” cooler=“” then=“” the=“” normale=“” asus=“” gtx=“” 460.<br=“”>my vid don’t even get to 42 degrees celsius.
i also own a program called kerbal space program and thats very heavy for cpu because every inch of things you build will be calculated every 6th of a second compairing with heat structural physics
and that program don’t even get near 46 degrees celsius… on high load.
so there must be some issue’s on some systems regarding UI…
normally its the video background or that movie file you can make with brink video thats common used in games mostly before 2008
but falcon 4.32 don’t use those kind of menu style… so
i really can’t say what the problem can be…
but i think for some pc configurations it seems not to like it.
but now its running in menu 32 degrees celsius with room temp of 23-26 degrees celsius.
in compair with 46 degrees celsius in ui…
like i sayd the other games that i run are in compair with falcon bms 4.32 cold…thats why i asked why is this… with such a old engine in compair like arma 2 or crysis 2 or 3.
this is how i config it in launcher option</runs>
hello guys.
i am starting to work on a new/old theater that is was making for falcon 4.0 allied force
the ukraine
but i lost my dem file that covers the area i like to make…
now i can only download it in little sectors.
does somebody know a good site where i can download dem files?
that can be used in falcon 4.0 bms editors?
and there is something i still miss in falcon 4.0 BMS or all other mod’s overhaulling
general aviation.
or did i miss some thing?
this year i am started for the first time ever with BMS.
in the past i didn’t own a proper pc to run it.
so i am stil little bit green with bms
but i own falcon 4.0 original from 1999 <the netherlands=“”>and i am used to edit terrains with fsx/fs2004, arma, battlefield 1942
and i am a quick learner… so it don’t take a lot of time for me to learn how to use and apply editors.
but is there somebody who can give me some starting directions for making it in BMS?
or is it the same with falcon 4.0/allied force?
about the theater,
well as you all know ukraine is a hot zone.
especially when the mh-17 was taking down.
i think the ukraine can be a real show-off between NATO and RUSSIA
so it seems to be in my eyes a good idea to have this theater in falcon bms
especially my country is on his last years of using the F-16
and starting to use the jsf f-35…</the>
i fixed some issue’s with BMS … the menu’s are now stable and no heating up and no lag anymore
32 *celsius at the moment.
but in game i had to turn off bloom and shaders heat waves and dubble cockpit resolutions displays… config menu before starting the game i mean
but this is not correct… other games like tombraider 2013, crysis 2 and 3 with shaders no problem
and bms causin heat problems with the shaders and post processing and bloom and heat waves.
here is a list of games that i run with out any problems with the same system specs.
ARMA 2
battlefield 3
crysis 2 and 3.
tombraider 2013
wings of prey/birds of prey
lock on flamming cliffs 2.
il 2- 1946 and cliffs of dover
stalker 1, stalker 2 and stalker 3 even with directx 10 option, stalker 1 gets directx 10 option by using a mod. and even then i don’t got issue’s
fsx acceleration with directx 10 option enabled
but yet BMS 4.32 i need to turn off post processing and stuff.
how come??
well in speed fan i see mostly core 2 and 3 loaded with falcon 4.0 AF, in BMS well most of the time with alt tab i can’t go alt tab back to the game again even with holding alt tab 1 second or 2 longer
yess sorry for that but i forgot to upload the cpu temp en stress picture of falcon BMS 4.32…
to let you guys see no 100 % use of cpu but too much heat for a menu
and the difference between falcon 4.0 BMS 4.32 and his little brother or sister how you want to call it falcon 4.0 AF
or have the temp issue to do that i run windows 7 64 bits and the sim is 32 bit?
i also use the 4 gb patch