Sorry guys, but Match play is not what I’m looking for. The scenario must be Furball. You die, you immediately respawn. No waiting for a team or anything else before you respawn. The requirement is for the AI to respawn as well. Is this possible?
Posts made by Snake323CO
-
RE: Respawn AI Aircraft
-
RE: Respawn AI Aircraft
If you are flying Furball…any ‘Live’ pilots will respawn after getting killed. However, if you add AI to the mix, the AI does not respawn, only the ‘Live’ guys. I’d like all aircraft to respawn…‘Live’ and AI, a like. Can this be done??
-
Respawn AI Aircraft
OK….I have another question. During dogfight mode, if you get killed, you respawn. Now, if I add some AI aircraft to the mix, they do not respawn when they get killed. Is there a way to configure it, so that the AI respawn as well??
Again…many thanks
-Snake -
Respawn
Quick question…I hope!! Can you set it up so that you respawn during a mission?? I know you respawn upon blowing up in dogfight mode, but is there an option that allows you to respawn if you die in a mission? (i.e. a mission created in ME)
Thanks
-Snake -
RE: Pause Screen Issue
Thanks Cobalt.
I’m going to assume(and we know what can happen there!), is that the Pause screens are the sims loosing communication with the server and are waiting to re-establish. Correct me if I’m wrong.
Also, I’ve been running the server in 2D for a couple of years now, with 4.32, and never had issues or this Pause screen. It has become an issue since switching to 4.33. I know 4.33 throws a LOT more packets down the wire, hence the updated routers.
The network settings, in the link C9 provided, refer to WiFi connectivity. My situation is strictly LAN based….all 8 sims in one room, server in another, over LAN.
Lastly, this is a default option in Falcon BMS.cfg called set g_bServer 0, which states “This option puts FalconBMS into Multiplayer Server mode. A server mode session can’t enter the 3D world.” It appears the 3D world is no longer an option.
So will the set g_bClientServerConnection 0 option in Falcon BMS.cfg, actually help? Or is there too much data now, coming from 4 sims plugged into a switch, to be transmitted down 1 cat5e cable? -
RE: Pause Screen Issue
AHHH…Thanks Cloud9. The server is idle, on a map. It does not fly at all.
-
RE: Pause Screen Issue
Sorry…define 3D. I’m sure it’s not what I’m thinking. Thanks.
-
Pause Screen Issue
Hey Everyone:
Have an issue I need assistance with. The situation is, there are 8 sims flying multiplayer air combat, using a 9th system as the server. The lan is laid out so that the first 4 sims are on one router/switch, the other 4 sims are on a different router/switch, coming in to a router/switch which is connected to the server. (got that in your head?!)
Approx. 15 minutes into combat, all sims lockup with a PAUSE message on their screens.
Now all 3 router/switches have been replaced to 10/100/1000 units, and all pcs are running Win7, with the server having 18gb of ram and the sims 16gb of ram. All systems are running BMS 4.33u1.
Any ideas why the Pause screen??
Thanks
-Snake -
RE: F/A-18 Tub View
Sorry for the slang, ‘Tub’. It refers to the ‘Empty Cockpit Shell’ in the keyfile. I’m trying to find out if there is an option that would allow this view for the F/A-18 as well.
Thanks -
F/A-18 Tub View
Hey All:
Is there a way, to fly the F/A-18 in ‘tub’ view. I normally fly it in ‘HUD only’, but I would like the ability to pan my view. Obviously ‘HUD only’ does not allow that, but being able to put it in ‘tub’ view would remove the instruments, and allow for view panning.
I know I would still see the F-16’s wings, but that isn’t a deal breaker.
Thanks
-Snake -
RE: Internal View Reset
Hey Nephilim…sorry for the late response. Was away on business. OK…back to the PITA! I have looked at the keyfile, and pressed num5, and it’s not associated with any key.
Would you mind sending me the keyfile you are using, so I can verify it does work here. Then I can see what I’m doing incorrect.
Thanks
-Snake
[email protected] -
RE: Internal View Reset
Hey regev….sorry, but tried it. Pressed 3 to go to ‘panning’ cockpit. Panned view, pressed num5, and all it does is make a ‘click’ sound.
-
RE: Internal View Reset
Hey Nephilim….I’ve tried several times, and it only works when I’m on an external view (i.e. 9 or 0). If I select 2(for snap), or 3(for pan), the default View Reset (shift_num5) does nothing. I’ve been using the default Dogfight (Furball) for testing.
Also, I’m using the default KeyfFile…BMS FULL.
FYI…I’m not a nube to flightsims (although it appears to be so!). Actually I’m an old f*** to sims. Been flying them since Falcon3, and was on a dev team for four flight games. However, clearly I have my head up and locked regarding this!!!
THANKS for all the help!!!
-Snake -
RE: Internal View Reset
Thanks, but Num5 is not assigned, and Shift+Num5 resets external view, not internal.
-
RE: Internal View Reset
Cik - 3 snaps back from where? If you ‘snap’ around, attempting to track an A/C, you may have no idea where ‘back’ is. And if you are panning, good luck finding center quickly. I’m looking for a (hopefully) one keystroke recenter function, that will recenter your HUD.
FYI, I’m on the current 4.33.1 version, and TrackIR is not an option.
Thanks
-Snake -
Internal View Reset
Hi:
Hopefully I’m just missing this, but is there a way to do a View Reset when inside the cockpit? I realize there is one for the external view, however, when I’m inside and panning or snapping my view, is there a way to snap back to center/forward?
Thanks a ton
-Snake
[email protected] -
How do you create Dogfight Missions
Hello:
How does one create dogfight missions, so that they are listed under DOGFIGHT/SAVED?
Thanks
-Snake