@SemlerPDX Thanks.

@Todd1215 Thanks. Nice idea and very usefull

@SemlerPDX Thanks.

@philip40912
for your work, maybe you could have a look to these 2 topics :

Korea-Aeronautical-Information-Publication-(AIP)-For-TACVIEW
not updated to 4.35, but most of the static objects are ok.

rnav-airways-in-korea-theatre

You may find some interesting information in addition.

Kind regards
Windblow

Hi Gundam
of course you can, you just have to set human pilots in AVCS4 BMS, thereby commands for those Human pilots are not taken into account by VA.
Very efficent

Yes you can without runing BMS
Just open a text file and make it active, ready to enter letters (the cursor must flash) . Say you command, and if recognize, you should see the letters and numbers write without anything else.

thanks Amadeus75 and Semler

Semler your suggestion doesn’t change any thing after I edited the profile as shown.

But it appear that the way suggested by Amadeus change something. I have to find the good timing for release and this way let the recognition log between the press and release log. Nice

When it works, I noticed something strange :

when I say a VHF command without PTT, I have
“9:22:36.933 AVCS4 Command Recognized, but PTT Mode is on and PTT Key Down not detected…
9:19:47.042 Recognized : ‘two say fuel’ (derived command) (Confidence 97)”

Which seems normal and nothing send to the file

But For a UHF command, even if recognition ok and nothing send to the text file, the warning about PTT does’nt appear

Is it the normal Behaviour?

Edit : When the release key seems not to have been detected, I noticed that i need to do a press, then wait 1 or 2s (i don’t know exactly how long) without saying anything, then release. and it seems that the PTT is re initialize with always the same behavior as describe in this post (Ptt warning not detected only for VHF):shock:

@Wingedsky:

Thanks for the answer Semler, but yes the log screen is very clear : both UHF and VHF are pressed, then released …
For sure I do something wrong but can’t find what …

At the end of the initialization of AVCS Core, I have this

BMS Data Load Complete - Voice Attack is now loading profile
Inline function execution exception: Exception has been thrown by the target of an invocation. Index was outside the bounds of the array

Could it be in relation with my issue ?

Thanks for the answer Semler, but yes the log screen is very clear : both UHF and VHF are pressed, then released …
For sure I do something wrong but can’t find what …

Hi Semler, here is an other post about PTT. Sorry for That
0.92b Core and v1.3.92b AVCS4BMS installed, PTT Buttons Assigned in AVCS4 BMS (UHF and VHF press and release). Initialization ok

W10, VAv1.8.7.12 x32 in administrator mode, Listening ON, PTT mode ON.

When I first try to say a command, recognition is green, and nothing write in the test text file. Nice, it works as expected.
UHF ON, Declare, q2 on text file, cool …
UHF OFF (release), declare again, and … q2 again… WTF… try with VHF ON ,Declare , q2 … Hummmm:?
I try with other commands and AVCS reacts as if PTT mode is OFF.

I shut down VA, relauch it, try an other command, then same behaviour.

I think I do something wrong.
I read at least 3 times all the 14 pages and can’t find what is wrong.

Maybe some idea, help ?

Thanks Dema
well, maybe I should see my windows settings.

Edit : After desactivating the spatial sound feature in the Headphones Properties tab (Windows Sonic For Headphones), everything works good now. :idea: