Mud's Profile
-
Hello Mud
Will it be updated to the new version BMS 4.33 U1 ? -
Hey ca5tor,
As far as I can see no changes should be done to the script for it to work with 4.33U1. I will have to modify the key file though to add the 4 new callbacks for the F-18.
I’m currently still running 4.33 myself, but as soon as I’ve updated I will sort out the key file.Br,
Mud
-
Hey Mud,
I’ve a problem with the profile. All buttons on my stick are not used except the trim switch. I’ve Falcon BMS 4.33 U1, Windows 10 Pro 64bits.
Any ideas? -
Same issue here as pticuny’s & Win10 Pro 64bit.
Thx for your trouble with a revised vers. as your profile is much appreciated!!! -
I think your device ID’s are probably wrong so the DX buttons are off.
Check out: https://www.benchmarksims.org/forum/showthread.php?26581-Falcon-BMS-4-33-U1-Script-don-t-work-correct-in-this-update -
I try with a basic profile provide by BMS, and all DX buttons work fine. But when I load your profile, all DX buttons are not used.
I saw the thread https://www.benchmarksims.org/forum/showthread.php?26581-Falcon-BMS-4-33-U1-Script-don-t-work-correct-in-this-update , and I remove “devicesorting.txt”, I changed lines to a correct order, but nothing happens.Edit: The key file is strange.
-
I just installed 4.33 U1 myself now to be able to check / test.
I had the same problem as you out of the box, so I had a look at the DeviceSorting.txt file and my rudder pedals were listed first there.
So I changed it to{FFFF044F-0000-0000-0000-504944564944} "Thrustmaster Virtual Game Controller (root)" {076406A3-0000-0000-0000-504944564944} "Saitek Pro Flight Combat Rudder Pedals"
And everything is working as it should.
Like I mentioned a few posts back, I’m pretty sure the only thing that needs changing in the script is the addition of a few callbacks to the key file for the F-18.
I’m fairly certain your problem is your device ID / order.
-
@Mud:
I think your device ID’s are probably wrong so the DX buttons are off.
Check out: https://www.benchmarksims.org/forum/showthread.php?26581-Falcon-BMS-4-33-U1-Script-don-t-work-correct-in-this-updateChanged the order in DeviceSorting.txt file. Will see if that did the trick. Thx!!!
Yeah, all is good now. Re-ordering the devices in DeviceSorting.txt file fixed the issue.
Thanks again Mud!
-
This is my DeviceSorting.txt file.
{FFFF044F-0000-0000-0000-504944564944} "Thrustmaster Virtual Game Controller (root)" {076306A3-0000-0000-0000-504944564944} "Saitek Pro Flight Rudder Pedals"
I copy and paste the key file in the Config folder of BMS.
I run the script through T.A.R.G.E.T.
I run BMS and I load the key file.I just remove the parts with the MFDs.
Same issue…
-
Did it work for you in 4.33 before update 1?
If you just started with 4.33U1, then have a look at this post:
https://www.benchmarksims.org/forum/showthread.php?8147-Morphine-s-Profile&p=341640&viewfull=1#post341640 -
I don’t know. I setup the 4.33 few days ago and for unexpected reason, I had a black screen during the launching. The next day, the 4.33 U1 was released, I tried it with your profile with this problem.
-
Thx Mud– everything works fine:
{FFFF044F-0000-0000-0000-504944564944} "Thrustmaster Combined" {00F2068E-0000-0000-0000-504944564944} "CH PRO PEDALS USB "
-
Morphine’s profile works fine. All DX buttons work fine. I don’t understand why your profile doesn’t work :(. I’m not familiar with the Morphine’s profile, but it’s a solution to play well.
But thanks a lot for you help Mud :)!
-
Update for 4.33 U1
I’ve updated the key file adding the new callbacks.
So the only file you need to replace is the key file. -
Hi Mud, can you help me bind a T-16000M to Rudder with Target? When I run your script my T16000M turn off (Hid Controller was off)
My devicesorting.txt looks that{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Combined (script)”
{B10A044F-0000-0000-0000-504944564944} “T.16000M (without script)”
{0402044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog (without script)”
{0404044F-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog (without script)”I today start play in BMS with my TM Warthog and I have noob question, how slew radar with your profile? I was thinking its a Slew Axis but only work “Slew Button” Sometimes when i click/activate something (dont know really what i push all buttons) my slew go on right all the time like holding axis/button.
-
I can’t check for the pedals right now, but for the radar slew please check post 12 in this thread (second pic)
-
Thanks! It work!
I use a Z-Axis for pedals in T16000M. -
Hi Mud,
I installed the new key file in BMS 33u1 and I have no buttons working at all on the stick.
also, no speed brake controls on the throttle.Any ideas?
Loki
-
Hi Mud,
I installed the new key file in BMS 33u1 and I have no buttons working at all on the stick.
also, no speed brake controls on the throttle.Any ideas?
Loki
https://www.benchmarksims.org/forum/showthread.php?8844-Mud-s-Profile&p=375432&viewfull=1#post375432
-
Hey Mud,
just tried out your newest version of the script with Update 1.
Is it possible that there is something wrong again with the missile step long button? Don’t know if you remember but we had the same problem solved a few pages back.
I just tried it and it wouldn’t switch between heaters and slammers.Greetings,
Mobius