Mud's Profile
-
Mud hello, congratulations for your profile you’ve done a great job!
I wanted to ask how to activate the datalink, I set the command of MFD “Cont” and can not see my wingman in HSD …. -
Mud hello, congratulations for your profile you’ve done a great job!
I wanted to ask how to activate the datalink, I set the command of MFD “Cont” and can not see my wingman in HSD ….Once you’re set to CONT, you have to press DELETE (COMMS IFF OUT) for about 1 second to activate the datalink.
-
Hello Mud,
first, thanks for your profile!
It works at my BMS 4.33u1 so far fine.
But i can’t enable the radar cursor. I push the knob at the slew control, but nothin happend. The reset function works….
And i was not able, to set the idle detend function in the config option from bms…, the funktion cursor enable was identifyed in the options…Did you have an idea?
Thanx for your help!
-
Hello Mud,
first, thanks for your profile!
It works at my BMS 4.33u1 so far fine.
But i can’t enable the radar cursor. I push the knob at the slew control, but nothin happend. The reset function works….
And i was not able, to set the idle detend function in the config option from bms…, the funktion cursor enable was identifyed in the options…Did you have an idea?
Thanx for your help!
What exactly are you trying to do with the radar? Are you just trying to slew the cursor around? In what radar mode are you? AG? AA?
-
Hi Mud,
I am also using TARGET, but with my TS T16000m. Since I have less buttons I wanted to use some buttons as modifier (shift and control) but BMS still reads button 1 or button 2 when I tap the key. When I hold, as per the profile, it gives me the proper output (the keyboard key). I also play Warthunder but my profile works fine, I am pretty sure its a BMS issue. How can I find the hex code of button 1,2,3 etc. in the config file (to delete them) and did you have similar issues? What I also think is that were getting 2 steps for each button, one for pulse and one for hold simulating the trigger lase and cannon like the real thing.
thx!
Whisky
-
Hi there
For some reason all the controls on the joystick don’t seam to work but the controls on the throttles do. Any suggestions
Thanks Sam -
Hi there
For some reason all the controls on the joystick don’t seam to work but the controls on the throttles do. Any suggestions
Thanks SamMost likely your device order in the devicesorting file. See: https://www.benchmarksims.org/forum/showthread.php?8844-Mud-s-Profile/page29&highlight=devicesorting
-
Hi Mud,
Just wanted to say thanks so much for this profile. I had a few issues with device sorting, but after reading what everyone had to say in this thread, my Warthog is now working perfectly with BMS. Thanks!
-
This post is deleted! -
Mud, I recently did a reinstall if 4.33U1. I can’t get uncage nor nose-wheel-steering nor guns to fire from my warthog. The inputs are registering. Here is my Devicesorting.txt
{0402044F-0000-0000-0000-504944564944} “Thrustmaster Combined”
{0404044F-0000-0000-0000-504944564944} “F16 MFD 1”
{B351044F-0000-0000-0000-504944564944} “F16 MFD 2”
{B352044F-0000-0000-0000-504944564944} “Logitech G940 Pedals”
{C2A8046D-0000-0000-0000-504944564944} “Logitech G940 Joystick”
{C2AA046D-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{FFFF044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”I know how well this profile runs. I’ve used it for a year. Do I remove the MFDs and put my pedals on line 2?
-
Mud, I recently did a reinstall if 4.33U1. I can’t get uncage nor nose-wheel-steering nor guns to fire from my warthog. The inputs are registering. Here is my Devicesorting.txt
{0402044F-0000-0000-0000-504944564944} “Thrustmaster Combined”
{0404044F-0000-0000-0000-504944564944} “F16 MFD 1”
{B351044F-0000-0000-0000-504944564944} “F16 MFD 2”
{B352044F-0000-0000-0000-504944564944} “Logitech G940 Pedals”
{C2A8046D-0000-0000-0000-504944564944} “Logitech G940 Joystick”
{C2AA046D-0000-0000-0000-504944564944} “Throttle - HOTAS Warthog”
{FFFF044F-0000-0000-0000-504944564944} “Joystick - HOTAS Warthog”I know how well this profile runs. I’ve used it for a year. Do I remove the MFDs and put my pedals on line 2?
I’m not at home now, so I can’t check my own devicesorting.txt, but try changing yours to:
{0402044F-0000-0000-0000-504944564944} "Thrustmaster Combined" {B352044F-0000-0000-0000-504944564944} "Logitech G940 Pedals"
Mud
-
I FIGURED IT OUT!
I updated my firmware and drivers to the Warthog. Now, the MFD lines disappear in the devicesorting.txt file and are replaced with TWO…. yes… TWO Thrustmaster Combined lines! It turns out that since I run the pedals through my aux stick (my Logitech G940) I have to stick that on the bottom and the pedals after the Thrustmaster.
{0402044F-0000-0000-0000-504944564944} “Thrustmaster Combined”
{FFFF044F-0000-0000-0000-504944564944} “Thrustmaster Combined”
{C2AA046D-0000-0000-0000-504944564944} “Logitech G940 Pedals”
{C2A8046D-0000-0000-0000-504944564944} “Logitech G940 Joystick”I don’t know why it works… it just does. Screw it.
THANK YOU FOR THE BEST PROFILE OUT THERE BRO!
-
Glad to hear you got it sorted!
-
This post is deleted! -
Hello Mud
Will it be updated to the new version BMS 4.33 U2 ?
thx -
Hello Mud
Will it be updated to the new version BMS 4.33 U2 ?
thxDepends, is the script not working properly in the new update?
I haven’t flown BMS in quite some time, but if things need sorting I’ll gladly take care of it.Br,
Mud
-
Mud - Thanks for the profile. First time I’ve got my joystick to work in a week. I’m just getting initially setup and the joystick stuff was a bit overwhelming. One question for you, if I’d like to change a few of the commands, is it better for me to do it through the TARGET software, or within the game keystroke settings?
-
Hey Macman,
You could do either, but I think editing the profile is going to be easier. Especially if you’re just planning on swapping some things around.
Br,
Mud
-
Thanks.
-
Mud - One more question, your TARGET file has a .tmc extension, however my TARGET can only edit files with an .fcf extension. I can run your file in the game, but cannot access it through TARGET to edit it. Any ideas?