F-1CG
-
Question.
CR camo low surfaces are common gray or metal grey?
I mean for the 2 i making and in general the old onesOn CR, bottom is metal grey :
Cheers,
Radium
-
On CR, bottom is metal grey :
https://img.over-blog-kiwi.com/0/64/42/44/201311/ob_fda8943cece430665e8287e9e2337660_f1cr.jpg
Cheers,
Radium
I thought so and i made some experiments with RTT quite satisfied i think :
Im learning things and i like it
Of course skin psd have have to be calibrated to new things like this -
Piece of art Manos!
-
NN is ready!
-
Oooh… Ahhh!
-
NN is ready!
https://i.ibb.co/xFStD3w/2020-02-12-213352.jpgGreat work !
IMHO squadron emblem on the tail is a bit small…
What do you think ?
-
Great job.
To my mind the steel ring on reactor is a very little too small.
Cheers
-
Great job.
To my mind the steel ring on reactor is a very little too small.
Cheers
You mean the ring before the engine nozzle pedals?? I see what i can do and compare it with photos and stuff…
@Radium : will fix… maybe just a tiny bit smaller. It depends on the era i think… Got the '08 (if i remember well) so are the serial numbers. 30-xx numbers where on 1995 might still had them in 08 as well. But i noticed some differences here and there. For example 1995 on the vertical fin there wasnt Armee De’l Air stencil written… But might be wrong as well. Why im saying about the Era… More common i found 13-xx (no date just the same SQ.), then found 1995 with 30-xx SN’s… and the 2008 i used with 113-xx…
-
Hello manos
Yes this ring. When I look on photos. It seems to be a little small on your work, not a lot. Maybe I am wrong (old eyes lol).
A very great job.
-
Hello manos
Yes this ring. When I look on photos. It seems to be a little small on your work, not a lot. Maybe I am wrong (old eyes lol).
A very great job.
Will Check
-
Well another point. On the left side of plane. I see 2 air plugs.
One under the R of armée de l’air and the second under E od DE.Are you sure they are presents on the plane?
I am sure on the right side you can find the second plug (E of DE). This one brings air on a box under (refresh).My 2 cents.
-
Well another point. On the left side of plane. I see 2 air plugs.
One under the R of armée de l’air and the second under E od DE.Are you sure they are presents on the plane?
I am sure on the right side you can find the second plug (E of DE). This one brings air on a box under (refresh).My 2 cents.
Yeap my mistake… The front ones doesnt exist! The smaller ones do! They are on both sides in the same spot (where i have the small ones E or DE) but not the ones in front of them… As for The Ring you mean in length?
Edit: Those inlets already be gone! Anyway only in 1st lod are vissible. Lower lods cause of optimization they don exist
-
Yes Manos for the ring I mean in length, for me the length is too small / length ‘paddles noze pos’.
Diameter is good.I agree : no front inlet. But on the left side there were no inlets when I worked on M F1.
On the right side only one (smaller on) . This inlet brings air on the box for after burners. -
Yes Manos for the ring I mean in length, for me the length is too small / length ‘paddles noze pos’.
Diameter is good.I agree : no front inlet. But on the left side there were no inlets when I worked on M F1.
On the right side only one (smaller on) . This inlet brings air on the box for after burners.Ok i think i can do that therefore its very small difference! As for the inlets i can confirm in two different walkarounds both CT/CR have them on both sides, now they where in all models? who knows! Here in Greece the CG other models had them other not! 123 for ex has them 107 no… (HAF sn numbers)
-
I leave French air force in 2008. So maybe a modification after.
-
I leave French air force in 2008. So maybe a modification after.
Cannot say for sure!
Στάλθηκε από το SM-G970F μου χρησιμοποιώντας Tapatalk
-
Dedicated Wingtip racks and “small” Tanks added Whats next??? Maybe a cockpit…… runs and hides again
Yeah i havent exported the new lods without the double inlets
-
EQ5 on the works. I decided to do 5 as it have minimum changes from CT so it will be easier to make. Major changes are the bulge on the nose that’s gone and the Vertical Fin changed…
Cheers!
EDIT: To the Gurus out here… Right now where u see the Grid black lines is where the CG is on the original dat… I think the real CG has to be aligned with where the main wheels touch the ground but not sure about it. A little help please? I wanted to ask for the CT/CR as well but always forgot
-
EQ5 on the works. I decided to do 5 as it have minimum changes from CT so it will be easier to make. Major changes are the bulge on the nose that’s gone and the Vertical Fin changed…
https://i.ibb.co/2n409Xp/F1EQ5.jpg
Cheers!
EDIT: To the Gurus out here… Right now where u see the Grid black lines is where the CG is on the original dat… I think the real CG has to be aligned with where the main wheels touch the ground but not sure about it. A little help please? I wanted to ask for the CT/CR as well but always forgot
Superb !!! I love it !!! Maybe color contrast is a bit high ?
-
Superb !!! I love it !!! Maybe color contrast is a bit high ?
hmmm… i cannot see much of a difference… unless you mean the edges between the 2 colors to be softer…
Edit:
With FS colors looks like that:
Colors mentioned are FS30475 (Sand) and FS36134 (grey) therefore most of the photos online (not much) shows that isnt in fact too grey but more brown but i can always count the years and exposure of photos as most of them are old …