EZBoards - Generate kneeboards (flights, comms, stpts, weather) from briefings
-
@MnMailman Hi. Are you using the latest version (v9) ?
I think there was a bug around this with 4.36 but it should be fixed.
If not, please send me the briefing.txt file. -
@Logic Hi Logic. Yes, just downloaded it from the original post link. I did edit the involved flight with Mission Commander.
Let me try another flight and see if that matters. -
@MnMailman reading the thread just before your posts, it looks like it might be anti-virus kicking in, take a look, there are a couple of solutions mentioned.
-
@CriticalMass said in EZBoards - Instant single-click briefing to kneeboards conversion:
@MnMailman reading the thread just before your posts, it looks like it might be anti-virus kicking in, take a look, there are a couple of solutions mentioned.
Ok thanks. I thought I successfully bypassed any such but I’ll double check.
-
Anti-virus doesn’t appear to be the problem; I have both xbrief files in the EZ Boards install location.
However, doing some testing. EZ Boards works with BMS 4.36 for me, but not 4.35, i.e., if that helps. -
@MnMailman Yes, that’s it! You must use >=v8 for 4.36 and <v8 for 4.35.
I’m sorry but this is because they changed some whitespace on that line and I’m only doing a strict lazy comparison. -
@Logic said in EZBoards - Instant single-click briefing to kneeboards conversion:
@MnMailman Yes, that’s it! You must use >=v8 for 4.36 and <v8 for 4.35.
I’m sorry but this is because they changed some whitespace on that line and I’m only doing a strict lazy comparison.Ah, ok thanks. Any chance of still getting the version for 4.35 ? No need to apologize; great program and work.
-
@MnMailman
Link for v7 (last compatible with 4.35):
https://drive.google.com/file/d/1dEe7swqNy2G_y93f965O6a7UqO22TwdD/view?usp=sharing -
@Logic Thanks ! Above and beyond help.
-
I was going to post that I did a comparison with MnMailman’s post and my latest Briefing.txt to say that I could see an extra space in MnMailman’s (before the
x
)Gamble1 2227 ( x ) DEAD 4 F-16CM-50 Destroy enemy air defense assets
vs
Gamble1 2227 (x ) DEAD 4 F-16CM-50 Destroy enemy air defense assets
but then thought, “Nah, can’t be that”
-
Updated to 4.36 and got the 4.36 version of balkans and was having an issue with getting EZBoards to give me my briefing on my kneepad. Every time I ran the .bat I saw it going into the Korea terrdata Koreaobj folder.
Took a look at the .Bat file between what I used in 4.35 and 4.36 and saw a difference:
4.36 v9 version:
IF “%THEATER%”==“Korea KTO” (
SET THEATERPATH=%BASEDIR%\Data\TerrData\Objects\KoreaObj
) ELSE (
IF EXIST %BASEDIR%\Data\Add-On %THEATER%\TerrData\Objects\KoreaObj\ (
SET THEATERPATH=%BASEDIR%\Data\Add-On %THEATER%\TerrData\Objects\KoreaObj
ELSE (
SET THEATERPATH=%BASEDIR%\Data\TerrData\Objects\KoreaObj
)
)
4.35 v7 Version:
IF “%THEATER%”==“Korea KTO” (
SET THEATERPATH=%BASEDIR%\Data\TerrData\Objects\KoreaObj
) ELSE (
SET THEATERPATH=%BASEDIR%\Data\Add-On %THEATER%\TerrData\Objects\KoreaObj
)Reverting that line to the V7 fixed the issue for me…but I only fly the Balkan and Korea Campaign so I’m not sure how it’s work for the others.
-
Thanks
-
Good morning.
Thx for this amazing tool.
I have an error running EZBoards 4.36 version with Baltic theater
Can you help me?
Thank you
-
@Skorp Baltic works for me.
There is something fishy on the line where it says “ELSE” no se reconoce …
Did you modify the batch file?
Maybe download latest version again? -
@Logic downloaded two times, but tomorrow I’m going to try again with a fresh installation then.
Thx
-
@Skorp Does it work with Korea KTO?
-
@Logic i’ ve had three tests…with the 9 versión.
Korea ok
Balkans, I see else error message too, but the programa copy the dds file in Korea fólder.
Báltico, the same error I’ ve told here above. -
@Skorp Hey, here:
https://drive.google.com/file/d/1vDPOI7jy5VqqLGV5DsB0nV2hp0bC7svo/view?usp=sharing
I put another version of the BAT file for test.
Please download, rename so that you cut off the extension after .BAT and then replace the one in your Ezboards folder.
See if it helps, check in all the theaters. -
@Logic Good morning.
With the new bat there is no ESLE error, but only in Korea the dds is copied; in Balcans and Baltic the file is copied in Korea too.
I´ve edited the bat file and rem/set the lines you put:
REM /// Path to theater dds files. This might not work for every theater.
REM /// When in doubt, ask the theater author or the community.
REM THEATERPATH=%BASEDIR%\Data\TerrData\Objects\KoreaObj
REM /// Might try this alternative for theaters that come with their own dds files:
SET THEATERPATH=%BASEDIR%\Data\Add-On %THEATER%\TerrData\Objects\KoreaObjBalcans is Ok, but in Baltic I have the error :
TARGET=“S:\Falcon BMS 4.36\Data\Add-On Baltic\TerrData\Objects\KoreaObj\7982.dds”
Target file doesn’t exist. Check theater. -
Well, I´ve made two BAT´s, one for Korea and the other for Balkans and Israel.
Any way to make other fo Baltic and Georgia? There is no KoreaObj directory for these theaters.
Regards